How to enter cline into blade media, picture guide.

Hi I've tried all above! I get channel list but all scrambled. Do I have to buy a gift? For this box blade media bm7000 combo. Got live feed going in vm signal strength 92%. Any help would be great ful.
 
None of this makes any sense to me, all I was sent was a newcamd.list & a cccam.cfg. I don't remember having to go through any of this last time I did it.
 
You put your line in manually in the BM7000, it is a pretty old box now.

Open the file you have with notepad, write down your line details
and then enter them manually.

So

N: bestserver.com 12450 newcustomer-1111 qwert_12345 01 02 03 04 05 ........14

will break down as

Address: bestserver.com
Port:12450
ID:newcustomer-1111
Password:qwert_12345

The numbers counting to 14 is the deskey and will be automatically filled in if you are using the Newcamd protocol

Look for the "spaces" in your line then you will see where the line breaks into it's four parts
 
Thanks for your help, can you help with another problem please? I have just updated the bm8000 firmware from bm site and now no 9991.
 
Official Blade Media firmware doesn't have the 9991 option.

You need a patched version of it.

There is one in the download section here

You need the 109p version.
 
You put your line in manually in the BM7000, it is a pretty old box now.

Open the file you have with notepad, write down your line details
and then enter them manually.

So

N: bestserver.com 12450 newcustomer-1111 qwert_12345 01 02 03 04 05 ........14

will break down as

Address: bestserver.com
Port:12450
ID:newcustomer-1111
Password:qwert_12345

The numbers counting to 14 is the deskey and will be automatically filled in if you are using the Newcamd protocol

Look for the "spaces" in your line then you will see where the line breaks into it's four parts

Hi Bees,

How do I get the cline details to input - Do I need to offer a gift?

Thanks

---------- Post Merged on 25-03-2016 at 12:28 AM ----------

Can anyone PM us with either a good cline or nline supplier for vm cable, thanks....
 
Hi does any 1 no how i update my amiko box most off the channels r away from about 6months ago tryed updating from usb but nothings happenin starting to feel lost now lol can anybody help me out plz thanks

Sent from my SM-G900F using Tapatalk
 
Official Blade Media firmware doesn't have the 9991 option.

You need a patched version of it.

There is one in the download section here

You need the 109p version.

Hey,

Downloaded the latest firmware update for the 7000s, but still no server option when pressing 9991.
Does it specifically have to be the 109p version?

Thanks,
Sean
 
12 Month VM - cable gift warranty - For Zgemma, Vu, Amiko and others. *3 rooms*

Hi,

Can anyone help??

Can anyone PM us with either a good cline or nline supplier for vm cable, thanks....
THIS GUY ON E-BAY BOUGHT LOADS OFF GREAT SERVICE AND AFTERCARE

Look at this on eBay:


12 Month VM - cable gift warranty - For Zgemma, Vu, Amiko and others. *3 rooms*
 
i am triying to put 9991 but nothing happen can u help me

---------- Post Merged at 10:13 AM ----------

i have blade bm 7000s
 
Guys I'm wondering what do you enter in the address if you don't have an ip address? Would something like this go in tvmedia.tech go in? Although it's numbers that are needed?
 
i am triying to put 9991 but nothing happen can u help me

---------- Post Merged at 10:13 AM ----------

i have blade bm 7000s
if the box is flashed with the official blade firmware then the 9991 option will not work, the box needs flashing with a third party firmware with 9991 option.ready available from the download section on this forum

---------- Post Merged at 09:06 PM ----------

Guys I'm wondering what do you enter in the address if you don't have an ip address? Would something like this go in tvmedia.tech go in? Although it's numbers that are needed?
can you be more specific as to what your trying to enter and into where, we can help a bit more with more info
 
Back
Top