MINI Edison OS mini stuck at 49 on boot after update on OpenVix

I was in the middle of doing the update for it then got an error now it's stuclear on the edision screen and just says boot on the box
 
Chears that sorted it now on 6.0 thanks only thing is some of my channels are missing seemes to be the ones under turner A......all the rest are grand?
 
Greyed out means one of your tuners has no signal check your cables and signal strength on both tuners. Probably loose connection on one of the cables
 
yeah i`m just after doing an update to 6.0 some of my channels were`nt coming in so i switched the cables...one in 1lnb socket the other in the loop that sorted the channels but its the recordings now
 
yeah i`m just after doing an update to 6.0 some of my channels were`nt coming in so i switched the cables...one in 1lnb socket the other in the loop that sorted the channels but its the recordings now

loop is not an input,
do you have a twin sat box?
twin sat will have
LNB 1
LNB 2
loop < do not use this connection [ for normal use ]

also,
there is NO openvix 6
the newest image is 5.1 , are you using a build.?
 
Stick your cables back where they should be you have greyed out channels because it is only able to use one tuner and that is being occupied by the recording.
 
look at the back of your box,
which of these boxes do you have, [ @ about 14 seconds pause it ]
the bottom box is sat & cable
the one above it is twin sat.

 
ok lads i`m going to be your christmas project lol bear with me i`m a noob at this i switched around cables but seems to be the same outcome.dont know if this will help but a couple of pics,

20171129_134404_zpscxeecn8c.jpg
 
sorry about the size,but i can remember when i first got the box i had the same problem with the channels being greyed out while recording but i fixed it by changing turner b to something....which i cant remember what to though
 
Back
Top