Zgemma star 2s

Mate you need to look in the USB pen your using to FLASH and check the files in the ZGemma folder. One should say FORCE and I'll bet yours says NOFORCE. Simply edit the NO part out of NOFORCE and the FORCE file is what starts the FLASH.
 
Mate you need to look in the USB pen your using to FLASH and check the files in the ZGemma folder. One should say FORCE and I'll bet yours says NOFORCE. Simply edit the NO part out of NOFORCE and the FORCE file is what starts the FLASH.
 
use a smaller one for flashing 2gb -4gb and they don't need to be branded, these boxes are a bit arsey with USB's. Which build are you trying to flash?
 
Goto downloads, OK on wooshbuild and download the build for your box, extract the file and take the Zgemma folder and add this only to your usb.
with your box powered off at the back place the usb in the back slot, then power up from the back and your box should now flash, follow the guide and then add your line details again and your sorted
 
Goto downloads, OK on wooshbuild and download the build for your box, extract the file and take the Zgemma folder and add this only to your usb.
with your box powered off at the back place the usb in the back slot, then power up from the back and your box should now flash, follow the guide and then add your line details again and your sorted
Tryed this with a 32gb didnt work al try a lower usb stick to see what happens
 
if you have a front usb slot try this and hold the power button on the front in until it boots and says flash
 
Back
Top