No signal on Tuner B

Panicman

Newbie
I recently upgraded my Whooshbuild to V6.

Before this, my channels were stuttering, so I thought upgrading would stop this.

After upgrading, I have only the FTA channels.

I did a Signal check, only to find that Tuner A had no signal, I had a strong signal on Tuner B. Checked internet connection with no problems.

It was suggested that if I swap my cables around I could at least get FTA....that what I have done. But I don't know why I have no signal on Tuner B.

My line is installed and fine, my internet is good.....this has only happened after I up graded Whooshbuild V5 to V6. I used to have a lot of sly channels still working, but no more.

Has anyone else had any problems like this?.....or any ideas why I have this problem?
 
Make sure you have set the network ID to your area as in town.. The link to the list is on my setup guide. Just go on my profile and look at my posts you should see one that says H2h set up guide
f3397ff6312c6380af62fe186b23f422.jpg


Sent from my FRD-L09 using Tapatalk
 
V6 for the H2 is quite hard to set up if it for the H2. What box do you have and what line did you ask for? Cccam or mgcamd?

Sent from my FRD-L09 using Tapatalk
 
Unless you download another that's already configured for cable.. With the H2 I had to add AutoBroquetsMaker via plugins and then in autobouqtmaker select the same stuff that tuna b was selected for it to scan for channels. There's a bunch of other bits I had to do like add my line and then restart softcam for the channels to work.. Its all over the place. If I had a box I'd have done one with this image and backed it up and uploaded to this site but I don't have a h2

Sent from my FRD-L09 using Tapatalk
 
Ive DL V5 today as couldn't get v6 to run on this machine.
I'm hoping for a smooth and moderately uneventful flashing caper tomorrow.
If everything doesn't go exactly to plan, I'm holding dave100 personally to blame.

feel free to send him dog turds through the post if you have any problems;)

:grin: :grin: :grin: :grin:
 
Pablo you struggle to flash in the park so how the hell are you going to flash a zgemma box?
Some peeps can't run a bath :grin::grin::cool::cool::grin::grin::cool::cool::grin::grin:
 
Gonna give it a whirl after me brew and a bacon sandwich.
Can't foresee any probs but WB6 wouldn't work with any line, that is to say, the build went on ok, but wouldn't accept any of 3 brand new lines, N, C or CWS
 
Ive DL V5 today as couldn't get v6 to run on this machine.
I'm hoping for a smooth and moderately uneventful flashing caper tomorrow.
If everything doesn't go exactly to plan, I'm holding dave100 personally to blame.

feel free to send him dog turds through the post if you have any problems;)

:grin: :grin: :grin: :grin:
you still messing with the box :grin:

Dave send pablo some dog turds through post :grin:
 
yeah, can't run iptv thru biohead's image, we not without a lot of fannying about.
Already tried wb6 and couldn't get it to work.
Watched iptv at weekend thru a mate's ZG using wb5 and it was as smooth as a freshly buttered bannister
 
iptv this is just a guide
FTP your xc.xml plugin to – /etc/enigma2
FTP your XC Plugin Folder to – /usr/lib/enigma2/python/Plugins/Extensions plugin
reboot box
 
I'll try this instead, DL wooshbuild 5 but just wanna get iptv up and running so will give this a try later, cheers Mr Bifferidge!
 
yeah, can't run iptv thru biohead's image, we not without a lot of fannying about.
Already tried wb6 and couldn't get it to work.
Watched iptv at weekend thru a mate's ZG using wb5 and it was as smooth as a freshly buttered bannister
Hmmm works ok for me...
you must be doing something wrong m8
 
Back
Top