Cable H7c softcam problem

roberts77

Newbie
Hi I have recently purchased a H7c and connected all up and set it up and ftp'd my cline and nline to usr/keys folder but when I go to soft cam panel to activate it all I have is no cam or oscam??? on previous boxes had several cam options.

running ATV 6.1 with wooshbuild 7 and have cline and n line to install. any help would be great also checked plugins and no softcam downloads that I can see.
 
Hi I have recently purchased a H7c and connected all up and set it up and ftp'd my cline and nline to usr/keys folder but when I go to soft cam panel to activate it all I have is no cam or oscam??? on previous boxes had several cam options.

running ATV 6.1 with wooshbuild 7 and have cline and n line to install. any help would be great also checked plugins and no softcam downloads that I can see.

That box won't take a C or N line, only oscam, regardless of which build or image you use
download and read through @Willo3092 guide on softcams and lines, everything is in there for you to convert the line to an oscam.server file
 
On any ARM based box which the H7 is you can only use Oscam, if it's not already installed then it should be available via the downloadable plugins list
 
Thanks for the replies was coming to that conclusion after reading a bit online, wasn't sure how to alter the files in the folder as have a couple of c lines and n lines and it looked a bit fiddly but found a program that does it all for you and it has worked a treat so thank you for your time and advice.
 
pulling my hair out here with h7c made a oscam.server file ith correct detals in to atv folder, server side shows connected but channels not clearing?

help please
 
pulling my hair out here with h7c made a oscam.server file ith correct detals in to atv folder, server side shows connected but channels not clearing?

help please
What atv folder did you put it into?
So you have access to the server to see connections or your provider telling you you're connected?
Does your provider allow oscam connections?
have you tried a test line from another provider?
 
What atv folder did you put it into?
So you have access to the server to see connections or your provider telling you you're connected?
Does your provider allow oscam connections?
have you tried a test line from another provider?

I thought this a bit strange too, oscam lines never look connected at the server end, they always appear as offline
 
What atv folder did you put it into?
So you have access to the server to see connections or your provider telling you you're connected?
Does your provider allow oscam connections?
have you tried a test line from another provider?

cams on box is oscam-atv-arm 1.2 & oscam atv emu arm 1.2 & oscam 11390

using grog build atv 6.1
oscam.atv folder
yes i do,
yes ocam connections
nope
 
no good

[reader]
label=fay96.dyndns.org
enable=1
protocol=newcam
device=fay96.dyndns.org,XXXX
user=h7user1
password=h7user2
cccversion=2.1.2
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccmaxhops=10
ccckeepalive=1
cccwantemu=0
 
Your line might be dead, try a new line, also, as @grog68 mentioned earlier, which folder did you put the server file in as there's two normally, just to confuse matters further
 
now instead of .server file ive used oscam webinfo which shows connected box and server side but no pic clearing
 
I thought this a bit strange too, oscam lines never look connected at the server end, they always appear as offline
On server oscam does show if connected, just wondered if they could see it is connected via panel or if their provider said it's connected.
cams on box is oscam-atv-arm 1.2 & oscam atv emu arm 1.2 & oscam 11390

using grog build atv 6.1
oscam.atv folder
yes i do,
yes ocam connections
nope
OK if in the oscam_atv folder, your softcam is set to oscam-atv ?
What channel are you testing it on?
Are you seeing picture on 101 (BBC 1 SD)
 
need some help i have zgemma h7c 4k arm box i have just done fresh install off open atv 6.2 and wooshbuild there no softcam plug in and ihave tried the download plugin nothing there
 
Back
Top