What's new
By:
Filters

WooshBuild Wooshbuild Infinity Support Thread

Status
Not open for further replies.
phl said:
Bud, dont give up, stick on freesat for now and take your time, take it very slowly, 1st thing went bad on me was the newest openatv image, try another one, when I put the usb in the back 1st go it didnt auto boot, I had to put the power on (Back button) and hold the power on button on the front and then let go, it started to say flash on the box, then just follow the guild, Making sure you click on your box model zgemma (Airdigital) that opens up Openwebif, from here you click Terminal, this is where you in put some text that downloads & installs the woosh infi. mine like most done all this ok, its just after it loads it was not finding VM tuners, but I got mine sorted.
Click to expand...

Were did you put your vm line and what line did you youse and how did you install it?
What was your CAM settings ?
 
Struggling with opening the correct webif page on my pc from the list ..
Can’t open any of them , just says
This site cannot he reached ..
Tried loads
The one I need is for VUzero....
Any ideas ?
 
Noste500 said:
Struggling with opening the correct webif page on my pc from the list ..
Can’t open any of them , just says
This site cannot he reached ..
Tried loads
The one I need is for VUzero....
Any ideas ?
Click to expand...
get the ip address of your boxthen type it in the browser at top of page
 
I just flashed with Wooshbuild Infinity but now on the EPG / tv guide it has entertainment but no ALL CHANNELS can I get this back or do you have to scroll over at the top to change category's

Cheers Matt
 
wooshman said:
WooshBuild uses the picon pack from https://www.picons.eu/ and I upload the new IPK when a bit of time has passed since I did the last one. These are little channel picons which are there for making things look a little nicer and don't add any functionality to the box. To be honest I don't spend my time checking to see if picons.eu have named a picon correctly or if they have a picon for a certain channel at all.

You can copy the picon which you want to appear as BBC1 Scotland HD from another picon but it isn't something I do. You are free to uninstall the current picon pack and install any other one you want to though, you are not limited to the pack I upload for the ease of end users, it is just there to make things look pretty from the word go saving users the need to do it themselves as the picon sets in openATV are all very outdated.
Click to expand...

it seems it must be a picons.eu issue, as i un-installed the ones supplied, then downoaded lastest from their site, installed, and still the same issue.
there doesn't seem to be a file called bbconescotlandhd.png, which makes me wonder why wooshbuild manages to show a picon for the channel - i'm guessing your build has a fallback set for bbc one?

picones.eu has a file called bbconescothd.png (which is what the channel is called on dsat), but not one with the full name.
guess i could just upload one with the filename, but not sure how to do that as it appears to use softlinks rather than actual files in the picons folder.
 
wooshman said:
Thanks for the info. I will look into this as none of those parts are touched by Infinity so should work regardless of openATV on it's own or with Infinity running.


How do I reproduce the problem please? Including button presses and USB device being plugged in etc.

Thanks in advance
Click to expand...


Hi,

Just a quick one on the multiboot did this ever get sorted?
Just used it for infinity but now can't go back to startup_1 or 2. I have infinity installed in startup_3. Could go between 1 & 2 before installing this. Get a blue screen error then reboots when selecting multiboot from the restart menu. Any ideas?
If it's not working is there anyway of selecting installs not via multiboot?

Thanks
 
willb1977 said:
Hi,

Just a quick one on the multiboot did this ever get sorted?
Just used it for infinity but now can't go back to startup_1 or 2. I have infinity installed in startup_3. Could go between 1 & 2 before installing this. Get a blue screen error then reboots when selecting multiboot from the restart menu. Any ideas?
If it's not working is there anyway of selecting installs not via multiboot?

Thanks
Click to expand...
Ive run multiboot on the 8500 and never had any problems with it running infinity.
I also have the openmultiboot available from the plugins running on the duo2 again with no problems.
I have infinity, wb7 and vix all running together
 
mikey07 said:
Were did you put your vm line and what line did you youse and how did you install it?
What was your CAM settings ?
Click to expand...
ftp newcamd (other people have diff type of lines) line to box, var/keys folder, blue button,softcam, softcam panel, selectcam1 > left/right arrow to pick your cam type, green button to restart, done.
 
I've just setup Wooshbuild with SkyNEW skin on my Formuler F1 and the channel numbers are not showing as they should i.e 101 BBC, 102 BBC 2 etc.. or in correct order when changing channel. Then when I check the Bouquets I'm only seeing Favourites TV (which is empty) and Last Scanned.

How can I fix the channel numbers and put them in correct order

Screen Shot 2018-11-20 at 18.58.19.png Screen Shot 2018-11-20 at 18.58.07.png Screen Shot 2018-11-20 at 18.57.50.png Screen Shot 2018-11-20 at 18.57.20.png Screen Shot 2018-11-20 at 18.57.05.png Screen Shot 2018-11-20 at 18.56.49.png
 
redcar-cs said:
I've just setup Wooshbuild with SkyNEW skin on my Formuler F1 and the channel numbers are not showing as they should i.e 101 BBC, 102 BBC 2 etc.. or in correct order when changing channel. Then when I check the Bouquets I'm only seeing Favourites TV (which is empty) and Last Scanned.

How can I fix the channel numbers and put them in correct order

View attachment 35874 View attachment 35875 View attachment 35876 View attachment 35877 View attachment 35878 View attachment 35879
Click to expand...

have you done a scan in autobouquetsmaker?
 
I installed WB infinity on Zgemma H2S & set it up as IPTV only as I didn't setup the box where I had a connection to a dish but the channels are jumping badly via IPTV so want to get get BBC1, ITv etc via the dish, how do i change the the settings to allow it to work via satellite for the non premium channels. I notice no Bouquet Maker plugin is installed, would i just need to install one & run it or is there something to be enabled first before it would detect any channels?
 
murdotechmob said:
I installed WB infinity on Zgemma H2S & set it up as IPTV only as I didn't setup the box where I had a connection to a dish but the channels are jumping badly via IPTV so want to get get BBC1, ITv etc via the dish, how do i change the the settings to allow it to work via satellite for the non premium channels. I notice no Bouquet Maker plugin is installed, would i just need to install one & run it or is there something to be enabled first before it would detect any channels?
Click to expand...
You need to set your tuners up as they wont be configured
Press menu > setup > service searching > tuner config
Then you need to download autobouquetmaker. If you follow this post, it as screen shots to show/help you configure it
http://www.techkings.org/threads/wooshbuild-support-thread.109525/page-273#post-872569
 
Status
Not open for further replies.
Back
Top