Can't flash Zgemma H2H

Lazza

Newbie
Hi I hope someone can help, when I try to flash my box with Wooshbuild instead of panel saying flash it says ....Boot......USB.....updt
I'm obviously doing something wrong so any help would be greatly appreciated
Regards
 
Try to press and hold the front power button as soon as you see usb

- - - Updated - - -

I have just looked at the download inside the zgemma folder you should see h3 go in that and you'll see noforce rename it to force then box should flash without having to press the front power button.
 
I've tried 2 usb sticks and neither are flashing? it also says force in the zgemma folder?

The zgemma are funny with usb sticks... you should really stick to a known brand like Kingson / Sandisk / Toshiba etc. ... if it's a usb drive you've used before, you may need to format it but it's been well documented on here so do a little research ;)
 
I used a hp 16 gb recently works a treat but you could do HDD Guru and format it with that, then format the stick in windows
then put firmware on stick and it should flash
 
I've used this
Code:
https://www.dropbox.com/s/srzv79dkm7s3inx/smdk_fat322.zip?dl=0
to format my usb no need for a windows format and you can run it within the zipfile
 
Last edited:
Back
Top