Cable h7 to rf modulator

siilver

TK Veteran
i had a h2s which had yellow, red and white output which sent over to the rf modulator to send around the house, which was great

but now with the h7 as my main box, they didnt want to make it that easy for me

so the yellow, red and white is gone and is now replaced with a 3.5mm AV Connection type thing
you can convert that too the yellow, red and white output then send it to the rf modulator

but...

the box doesnt send signal to both the hdmi and the AV at once
so its one or the other

thats the best way around this
 
You haven't said how many TV's you need to feed.
Is it out of the question to move the H2S to another room and feed the rest of the house from that?
You could also consider buying cheap enigma2 boxes and stream over the ethernet but that will reduce the number of tuners available on the H7.
 
Its just to go to a Rf splitter, but I can change it. Up easy enough

New box, the Rf in to the cable splitter and up to a second box



But I found the change to cable very easy. I split the cable signal and run a couple lengths of cable to the h7 very easy done
 
Also, on the switch over

Everything I had setup worked grand.

Iptv no problem, didn't have to change anything at all
 
Right had a wee play about

As said I have cable going to the roof space going to a power splitter there

At the min I have a 3way splitter out of out side cable input, 1 modem and 2 h7
Took one of the h7 cable and joined to the cable going to the roof space in to powered splitter there

And it has seemed to have worked
7 out of 10 channels worked perfect, had signal 87 to over 90%
Then others were zero

The cable to the roof is cheap screw fix stuff, but that can changed
 
Back
Top