sucmnsee
TK Veteran
Below is old version. Most recent backup now vix 3.2.021 with Kiddacs great new skin.
pics attached
http://www.techkings.org/zgemma-star-2s/82204-new-sucmnsee-latest-backup-zgemma-2s-s-h1-h2.html
Backup of Vix 3.2.005 19/09/15 for zgemmastar 2s (will work fine on h1, h2 & s too )
REMOVED BLUE HD SKIN. LEFT SKYSKIN. PEOPLE COMPLAINING BLUE HD SLOW.
all plugins up to date.
alll frequencies up to date
Set with mgcamd1.38. & cccam2.3 and with all mg_cfg and newcamd.list and CCcam.cfg files needed in place! Just edit ur details in and reboot! DO NOT SEND YOUR FILES IN. EDIT WHATS ALREADY THERE!
Do not online update Vix on any box from Airsat (ibox/zgemma). I have updates turned off anyway.
(If the box boots up without flashing you have usb issue so ask in forum for help :-)
so first unrar the file and use ur fat32 formatted standard usb to put the "zgemma" folder on.
turn off box
insert flash usb in rear
boot up. Box should take 6-15 minutes to flash and MAY say FLASH on front when flashing. occasionally when flashing the front panel may remain blank, just give it 15 minutes in case. IT MAY STILL BE FLASHING.
box will reboot when finished
No need to press front power button or anything.
OK. Basically u need a usb or hard drive that can be wiped and devoted to the box.
That will store program guide and recordings and timeshift to rewind TV etc.
4gb is minimum I'd recommend. But more is better.
Once image is flashed and u edit ur 2 files in usr/keys with DCC.
Get the permanent USB/hdd onto a PC and quick format it.
Box off.
Usb in rear.
Box on.
Menu
Setup
System
Storage devices
Initialisation
Select ur drive
Red to initialise
Exit all
Menu
Setup
Vix
Swapfile manager
Blue to create 256mb. Wait
Yellow to autostart
Green to start
Red to close.
Hold power button on remote for 3 secs and select Restart (never GUI)
(If u are using a large enough usb/HDD u may want to go to
Menu
Setup
System
Timeshift settings
Autostart ts after 30secs or whatever.
As it is u must press pause to start timeshift)
Menu
Setup
Service searching
Autobouquets maker
Providers. Wait
Sky UK (sd):area. Change from northern ireland custom to your area custom by pressing right or left.
Green to save.
Start scan. Wait.
Hold power Restart
Menu
setup
System
Epg
Cross EPG
Download now. Takes 5-10 mins. Happens automatically at 6.15 am anyway.
Hold power again and restart.
auto bouqets setup
auto epg update set
cross epg setup to hdd
picons removed as far too slow imho
service scanning set to SD and HD replaced where possible
AddeD fraggle 121 skyskin. Removed vix dark skin
Includes mgcamd, openwebif, picture player, mediaportal, ondemand, tspanel, dreamexplorer, Media scanner, permanent vfd clock,
TSMedia
KodiDirect
YouTube plugin
To install picons if you want:
google and find a picon folder.
copy the picon folder to hdd main folder.
graphical infobar epg settings.
change service title mode to picon and service name.
then graphical epg settings.
change service title mode to picon and service name.
Then channel selection settings.
show picons In service list. Change to yes.
pics attached
http://www.techkings.org/zgemma-star-2s/82204-new-sucmnsee-latest-backup-zgemma-2s-s-h1-h2.html
Backup of Vix 3.2.005 19/09/15 for zgemmastar 2s (will work fine on h1, h2 & s too )
REMOVED BLUE HD SKIN. LEFT SKYSKIN. PEOPLE COMPLAINING BLUE HD SLOW.
all plugins up to date.
alll frequencies up to date
Set with mgcamd1.38. & cccam2.3 and with all mg_cfg and newcamd.list and CCcam.cfg files needed in place! Just edit ur details in and reboot! DO NOT SEND YOUR FILES IN. EDIT WHATS ALREADY THERE!
Do not online update Vix on any box from Airsat (ibox/zgemma). I have updates turned off anyway.
(If the box boots up without flashing you have usb issue so ask in forum for help :-)
so first unrar the file and use ur fat32 formatted standard usb to put the "zgemma" folder on.
turn off box
insert flash usb in rear
boot up. Box should take 6-15 minutes to flash and MAY say FLASH on front when flashing. occasionally when flashing the front panel may remain blank, just give it 15 minutes in case. IT MAY STILL BE FLASHING.
box will reboot when finished
No need to press front power button or anything.
OK. Basically u need a usb or hard drive that can be wiped and devoted to the box.
That will store program guide and recordings and timeshift to rewind TV etc.
4gb is minimum I'd recommend. But more is better.
Once image is flashed and u edit ur 2 files in usr/keys with DCC.
Get the permanent USB/hdd onto a PC and quick format it.
Box off.
Usb in rear.
Box on.
Menu
Setup
System
Storage devices
Initialisation
Select ur drive
Red to initialise
Exit all
Menu
Setup
Vix
Swapfile manager
Blue to create 256mb. Wait
Yellow to autostart
Green to start
Red to close.
Hold power button on remote for 3 secs and select Restart (never GUI)
(If u are using a large enough usb/HDD u may want to go to
Menu
Setup
System
Timeshift settings
Autostart ts after 30secs or whatever.
As it is u must press pause to start timeshift)
Menu
Setup
Service searching
Autobouquets maker
Providers. Wait
Sky UK (sd):area. Change from northern ireland custom to your area custom by pressing right or left.
Green to save.
Start scan. Wait.
Hold power Restart
Menu
setup
System
Epg
Cross EPG
Download now. Takes 5-10 mins. Happens automatically at 6.15 am anyway.
Hold power again and restart.
auto bouqets setup
auto epg update set
cross epg setup to hdd
picons removed as far too slow imho
service scanning set to SD and HD replaced where possible
AddeD fraggle 121 skyskin. Removed vix dark skin
Includes mgcamd, openwebif, picture player, mediaportal, ondemand, tspanel, dreamexplorer, Media scanner, permanent vfd clock,
TSMedia
KodiDirect
YouTube plugin
To install picons if you want:
google and find a picon folder.
copy the picon folder to hdd main folder.
graphical infobar epg settings.
change service title mode to picon and service name.
then graphical epg settings.
change service title mode to picon and service name.
Then channel selection settings.
show picons In service list. Change to yes.
Attachments
Last edited:
