OpenATV-5.1 + Slyk 1 HD Skin - Fast N' Loud - Backup Build

thomas88

Member

OpenATV-5.1 + Slyk 1 HD Skin - Fast N' Loud - Backup Build

View attachment 14333

Build info:

OpenATV-5.1
Slyk 1 HD Skin by Kiddac installed
A/V setting mode 1080p
Language set to English
Spinner removed and homer or Open ATV installed
add what plugins/softcams or skins as you like.



INSTALLED ON THIS BUILD

Softcams:
MGcamd 1.38
View attachment 14334


Plugins:
Cacheflush
CrossEPG Downloader
Filebrowser
Media scanner
Mymetrixlite
OpenWebif

View attachment 14335



Bootlogo:
Fast N' Loud
View attachment 14333


skin:
Default - Vix Night-HD
New Skin Slyk 1 HD by Kiddac

View attachment 14336



Spinner:
Homer
View attachment 14337


OR

Open ATV

View attachment 14379



ZGEMMA DISHCABLE'S SETTUP


plug one dish cable into tuner A. and the second cable into B.
or
plug single cable in to A. turn B off.
setup,service searching,Tuner configuration,
set Tuner B: not configured

View attachment 14338


FLASHING THE ZGEMMA

1,Download Fast n Loud build software from the link.
2, Unzip it and copy the Zgemma folder to the USB Driver.
3, Plug the USB to the back panel USB port.
4, Power on,

5, Press the Power on. Then the display shows View attachment 14339
6, power off, reboot.



ZGEMMA S2 SETTUP

ADDING A BIGGER USB DRIVE TO THE BOX FOR RECORDING.

1st to initialise your drive or AFTER FLASH (make sure zgemma folder is not on usb)
Insert usb in back
Turn on
Press the
Blue Button
Harddisk
Initialisation (select ur usb/hdd)
Initialise with
red button.
View attachment 14340


Now Check
Press the Blue Button
Mounts
Device Manager
Mount manager (make sure mount is to hdd and format ext4)

View attachment 14341



SWAPFILE SETUP
Menu
Info Panel
Plugins
Swap manager
Make sure its created, enable at startup and active- or see setup thread.
everything else should be set to correct paths after reboot.

View attachment 14342



SCANNING CHANNELS
Menu
setup
service searching
autobouquets maker
providers. Change skyuk: area to your area.
save
delete bouquets
start scan
reboot

View attachment 14343



TUNER CONFIURATION
only if your not on 28.2e astra
menu
setup
service searching
tuner configuration
choose tuner
turner a
reception settings
automatic
then turner b
reception settings
automatic

View attachment 14344



FXP N-LINE
flashfxp setup on your pc
zgemma connected to router
we are using MGcamd 1.38, you will need to add your new N.line in the newcamd.list
ok lets get the box ip, menu,setup,system,network,FTPsetup(running)good.. device setup,adapter settings. here you
can see the ip address. (my one is 192.168.1.98)and user interface is yes and use DHCP yes. network test all good.
so run fxp client connect, add ip, user:root password,root port,21


EDIT AND SAVE FILE
go to /usr/keys/ edit newcamd.list so it looks like this.
CWS = servicesat.syt.net 14030 gam0007 SatTO 01 02 03 04 05 06 07 08 09 10 11 12 13 14
save logout.

View attachment 14345


START SOFTCAM
Press the Blue Button
softcams
softcam panel
start/restart
exit

View attachment 14346


PICONS
add the picon folder to your HDD
View attachment 14351




View attachment 14412


View attachment 14347

View attachment 14358

View attachment 14349

View attachment 14350




View attachment 14411

Homer Spinner Build:Mega File Upload - OpenATV-5.1 + Slyk 1 HD Skin - Fast N' Loud - Backup Build.rar


Picons:
http://www.filedropper.com/picon


ATV Spinner Build:Mega File Upload - New ATV Spinner Build.rar


NEW 720p Build:http://www.megafileupload.com/hYyY/720p_build.rar

RAR Password: qwerty

build by Thomas88


if you test this build plz's give feedback on build performance.






















 
Last edited:
Hi Thomas88, loaded the first version and had to update the skin to the latest version. This build seems to whizz through the menus etc. my only niggle and wondering if you have a solution- when I put the box in standby mode, the display will always show the time it was put into standby never the actual time?
 
Hi Thomas88, loaded the first version and had to update the skin to the latest version. This build seems to whizz through the menus etc. my only niggle and wondering if you have a solution- when I put the box in standby mode, the display will always show the time it was put into standby never the actual time?


just tested the stanby and all working for me. do a software update.....
 
Last edited:
the crossepg is working good and has updated today 100% . I did install xmltvimport but it's turned off. give the build ago its nice.
 
Hi Thomas88, loaded the first version and had to update the skin to the latest version. This build seems to whizz through the menus etc. my only niggle and wondering if you have a solution- when I put the box in standby mode, the display will always show the time it was put into standby never the actual time?

Looks like the flash didn't work, along with the time issue on the front LCD, that's a classic Vix sign, try to re-download and re-flash ;) don't do an online update just incase you are on VIX, could brick the box
 
Online updates with Vix can cause a bricked box, if you want the time working and quick box go for a Vix4e2 image
Any link at all? Thanks.

---------- Post Merged at 03:35 PM ----------

Thanks Thomas88 for all your builds, I done all three and somehow have a mix of builds. I may try and flash this again or try boobishabang's suggestion.
 
try and reflash the build. this atv 5.1 is as fast the vix4e2 build or a faster build is the vix 3.2.010 by me.
I tested the vix4e2 build and its is fast but thay have stopped all updates for it.
 
Hi, just flashed your image, very good but having trouble with crossepg.

Is it just a case of hitting 'download now' or do I need to do anything else with providers? It starts to download, spends an eternity at 2.01mb, eventually finishes but just showing fta epg, nothing for premium channels? I've just ticked rytec uk and hit download again but it seems to be stuck now?

Also got my new nline on and activated softcam, although getting big 30 second+ scrambles on premium channels. I was using a vix image earlier today and had same problem with both my old cline and new nline so unsure what I'm doing wrong, guessing it's softcam related as host info kept disappearing during scrambles?
 
Back
Top