What's new
By:
Filters

technomate 5402 m2. freezing glitching help?

tomsta79

tomsta79

Newbie
ok lads had the same problem now for a long time does not matter how many c and n lines ive tryed always get the same problem freezing glitching pausing. then i contact my provider at there end and they say every thing is ok at there end. it must be my end. ive had another dish put up new lmb. new virgin router still get the same problem. ive got blade 7000s down stairs which is wire connection. and ive a technomate 5402 m2 version up stairs .. which is run off tp 500 mbs home plugs.. every time i try a new provider they all say are my service is spot on and this does not happen with mine then guess what i try a line then back to square one.. ive read some were about this working for some people (disable emm's) but not sure on how to do this could any one help with this . as i cant think of any thing more that will fix these problems. thanks
 
to be honest both them boxes are rubbish

the blade 7000 goes down to the image on the box and the image (maybe out dated ) was spark if i recall was reported to give glitching
i have never delt with a tm of that model so cant comment

do you have a mate with another make of box to test?
 
If your internet connection has high latency (a lot of people have found this with virgin), you will get glitching. Try a ping test ( ping www.bbc.co.uk) and note the time in milliseconds, if it is high (above 100ms or so) then that would explain your problem.
 
dumbguy said:
If your internet connection has high latency (a lot of people have found this with virgin), you will get glitching. Try a ping test ( ping www.bbc.co.uk) and note the time in milliseconds, if it is high (above 100ms or so) then that would explain your problem.
Click to expand...

who the hell gets above 100? thats bad mate i get 8ms on vm and never seen above 45ms in 5 years of phone and cable installs
 
I've seen people complain of ping times of over 300ms on another forum. 8ms is excellent, but where interleaving has to be used (long lines etc.) 45ms would be considered pretty much a decent result.
 
tomsta79 said:
ok lads had the same problem now for a long time does not matter how many c and n lines ive tryed always get the same problem freezing glitching pausing. then i contact my provider at there end and they say every thing is ok at there end. it must be my end. ive had another dish put up new lmb. new virgin router still get the same problem. ive got blade 7000s down stairs which is wire connection. and ive a technomate 5402 m2 version up stairs .. which is run off tp 500 mbs home plugs.. every time i try a new provider they all say are my service is spot on and this does not happen with mine then guess what i try a line then back to square one.. ive read some were about this working for some people (disable emm's) but not sure on how to do this could any one help with this . as i cant think of any thing more that will fix these problems. thanks
Click to expand...


This is from my experience, freezing and glitching are caused by bad server or could be your LNB shorting or a very old worn wire going to the box, if you experience scramble or $ channels not working usually your broadband losing connection or bad Ethernet cable.
 
You must log in or register to reply here.
Back
Top