Zgemma H2S software problem

[Graham 2]

Hi
When the box was booting yesterday there was a power cut and now it will not complete the boot.It counts up to 99 then starts again at 00 after stating there was a software problem. Has anybody any ideas for fix? Thanks for any advice.

 

[pieeater2015]

you might need to reflash the box.Do you have all your details for the box to put back on it after flashing.

 

[bazcfc1]

Hi
When the box was booting yesterday there was a power cut and now it will not complete the boot.It counts up to 99 then starts again at 00 after stating there was a software problem. Has anybody any ideas for fix? Thanks for any advice.

You will have to reflash your box something has corrupted it make sure you have your iptv details and line details for sattalite if you was using them

 

[BeakyFord]

your box will need a reflash, flash with base image (most common is ATV 6.2) that will get your box to function again, then you can restore it back to how it was before your power cut by navigating via the remote to your backup (providing you have made a backup).

 

[Graham 2]

you might need to reflash the box.Do you have all your details for the box to put back on it after flashing.

I tried to reflash but the box goes to reboot with the same fault.

 

[bazcfc1]

I tried to reflash but the box goes to reboot with the same fault.

You did just put the zgemma file onto usb and used the rear USB port not the front

 

[Graham 2]

You did just put the zgemma file onto usb and used the rear USB port not the front

I tried both with same result

 

[bazcfc1]

I tried both with same result

Have you tried formatting usb and downloading the right image as @BeakyFord has stated tru open atv 6.2 your box model will be in air digital
Edit don't formatt usb unless it's not one that you in your box @BeakyFord oops forgot that part

 

[BeakyFord]

DO NOT format your USB IF you have a backup on it that you want to restore from as you will need whats on the USB to do this.... find/use a small capacity (2gb, 4gb or 8gb) usb just to perform the flash then once flashed put your original usb back in the box

 

[escortrs]

I tried both with same result

Why not just follow the instruction for putting Wooshbuild Infinity on the box, that way you wont need to find a working USB stick and will be able to confirm that you box is still 100% ok, you would also have the very latest build of woosh and ATV.

http://www.techkings.org/threads/wooshbuild-infinity-for-all-enigma2-boxes.140702/

 

[BeakyFord]

while his box is stuck on boot he cant load any builds as the box doesnt boot up fully, it needs a USB flash to get it to function

 

[escortrs]

while his box is stuck on boot he cant load any builds as the box doesnt boot up fully, it needs a USB flash to get it to function

TRUE, sorry forgot that stumbling block, my bad:emoji_disappointed:

 

[Graham 2]

while his box is stuck on boot he cant load any builds as the box doesnt boot up fully, it needs a USB flash to get it to function

A new USB stick did the trick! Flashed Wooshbuild and have FTA channels at least . Manually installed the C line but that`s not working as yet.Thanks for help and quick responce.

 

[BeakyFord]

have/did you make any fullbackups of your system before the powercut? IF you did then you have your system saved as it was before it borked up, you can reload this image (IF you have one) by going to: blue button/flash online-local/...blue for local...yellow for device....usb-hdd by its name....fullbackups... open the newest dated save & continue to open until you can see kernel.bin....highlight kernel.bin then press green to flash