Hi guys,
Thanks in advance for any guidance, my provider isn't responding to me at the moment.
So long story short, the Vod folder for my IPTV service was a bit jumbled, i.e categories not clearly defined, no pictures of films, no information on film, 4000 films in vod but only 300-500 appearing and some categories not appearing properly.
So i took matters in my own hands and decided to reset bouquets which was a mistake as now I have no channels, as you might be able to tell i'm not a techy but i've somehow managed to get my system setup and running for the last few years with support of my provider.
So as far as I understand the system I’m running is Zgemma enigma 2 wooshbuild Edison mini is receiver, via IPTV plugin.
So I went into the menu via my remote and reset bouquets, this then cleared all channels on my box and also when I connected to the box via my browser the bouquet editor is very basic with no reference to my service, So I putty’d to box from laptop and ran a script which the provider sent me, it starts with opkg update then 3 lines of code which references e2m3u2bouquet
(not sure if i'm allowed to post the code here?) and the procedure runs successfully and the box restarts.
Now when the box first starts up it always comes up with a wooshbuild installation setup, this always happens since I updated to wooshbuild a few years ago, and I just press the exit button as it is already setup, it then takes me to an access denied screen which i believe was the old system i was using before called xtream I normally press exit on this also and it usually takes me to my current service where i can see the channel list and watch tv normally, So I can tell my box needs a bit of housekeeping as it probably shouldn't be coming up with these things.
So upon reboot and getting out of those 2 previous screens I can see that my channel list is still empty on box, so I create bouquets on box via the remote control and it takes literally 1 second and says It’s done but it doesn’t run threw the numbers like it normally does, think it’s like 12,000 usually. So I then have a look at bouquet editor via browser on laptop and that shows favourites and m3u2bouquet as per screenshot, usually under that section I can see my providers list of channels, but whenever I click on favourites or m3u... and expand it doesn’t display any channels or categories which it did before. I even tried to load an apk file I think it was from an earlier email that my provider sent me a while back but it doesn’t do anything.
So that's the stage i'm at, I feel like it's probably a simple fix for someone who knows what they are doing but i've reached the end of my limited knowledge on this so i don't really know where to go from here.
Any help would be greatly appreciated, otherwise it's going to be an extremely boring xmas ;)
Thanks in advance for any guidance, my provider isn't responding to me at the moment.
So long story short, the Vod folder for my IPTV service was a bit jumbled, i.e categories not clearly defined, no pictures of films, no information on film, 4000 films in vod but only 300-500 appearing and some categories not appearing properly.
So i took matters in my own hands and decided to reset bouquets which was a mistake as now I have no channels, as you might be able to tell i'm not a techy but i've somehow managed to get my system setup and running for the last few years with support of my provider.
So as far as I understand the system I’m running is Zgemma enigma 2 wooshbuild Edison mini is receiver, via IPTV plugin.
So I went into the menu via my remote and reset bouquets, this then cleared all channels on my box and also when I connected to the box via my browser the bouquet editor is very basic with no reference to my service, So I putty’d to box from laptop and ran a script which the provider sent me, it starts with opkg update then 3 lines of code which references e2m3u2bouquet
(not sure if i'm allowed to post the code here?) and the procedure runs successfully and the box restarts.
Now when the box first starts up it always comes up with a wooshbuild installation setup, this always happens since I updated to wooshbuild a few years ago, and I just press the exit button as it is already setup, it then takes me to an access denied screen which i believe was the old system i was using before called xtream I normally press exit on this also and it usually takes me to my current service where i can see the channel list and watch tv normally, So I can tell my box needs a bit of housekeeping as it probably shouldn't be coming up with these things.
So upon reboot and getting out of those 2 previous screens I can see that my channel list is still empty on box, so I create bouquets on box via the remote control and it takes literally 1 second and says It’s done but it doesn’t run threw the numbers like it normally does, think it’s like 12,000 usually. So I then have a look at bouquet editor via browser on laptop and that shows favourites and m3u2bouquet as per screenshot, usually under that section I can see my providers list of channels, but whenever I click on favourites or m3u... and expand it doesn’t display any channels or categories which it did before. I even tried to load an apk file I think it was from an earlier email that my provider sent me a while back but it doesn’t do anything.
So that's the stage i'm at, I feel like it's probably a simple fix for someone who knows what they are doing but i've reached the end of my limited knowledge on this so i don't really know where to go from here.
Any help would be greatly appreciated, otherwise it's going to be an extremely boring xmas ;)