Hello you wonderful lot 😄
I need some assistance please. Decided to make the leap away from Sky, and have a Zgemma H2.h box. I have Open ATV 6.4 with Groggbuild, which was flashed yesterday.
For some reason, I am only picking up 49 channels through the satellite feed, and as shown in the picture, the satellite is the correct one (28.2E Astra 2E) I am only picking up some foreign channels, but not the usual freesat you would expect. It does find ITV HD however, but no BBC1, 2, CH4 etc.
I looked on threads and forums first, and have tried a few suggestions first. For example, during the Grogbuild via Putty, I input the Satellite choice above required, the region etc, but it hasn't reflected in the channel list. I have looked under Auto Bouquets Maker and selected 'Free Sat = Yes' and set FTA to yes as previously suggested . Rescanned and still not picking up the usual FreeSat channels. I have tried updating provider files in case of outdated ABM, and it runs then tells me it is the latest version.
Am I missing something glaringly obvious? My next steps are either adding Satellites manually (ballache) or reflash and double check I selected right satellites during install (even more ballache) but in fairness as shown in the picture I am on the right Satelite searching.
Regarding the hardware, one of the twin cable feeds is plugged into the main tuner, and the left I was told to keep empty unless I have cable services etc photo attached. I have tried checking a scan with alternate feed wires and get different results but still no standard terrestrial channels.
I did also try scanning via ABM and it failed as per the enclosed pic.
Thanks in advance.
I need some assistance please. Decided to make the leap away from Sky, and have a Zgemma H2.h box. I have Open ATV 6.4 with Groggbuild, which was flashed yesterday.
For some reason, I am only picking up 49 channels through the satellite feed, and as shown in the picture, the satellite is the correct one (28.2E Astra 2E) I am only picking up some foreign channels, but not the usual freesat you would expect. It does find ITV HD however, but no BBC1, 2, CH4 etc.
I looked on threads and forums first, and have tried a few suggestions first. For example, during the Grogbuild via Putty, I input the Satellite choice above required, the region etc, but it hasn't reflected in the channel list. I have looked under Auto Bouquets Maker and selected 'Free Sat = Yes' and set FTA to yes as previously suggested . Rescanned and still not picking up the usual FreeSat channels. I have tried updating provider files in case of outdated ABM, and it runs then tells me it is the latest version.
Am I missing something glaringly obvious? My next steps are either adding Satellites manually (ballache) or reflash and double check I selected right satellites during install (even more ballache) but in fairness as shown in the picture I am on the right Satelite searching.
Regarding the hardware, one of the twin cable feeds is plugged into the main tuner, and the left I was told to keep empty unless I have cable services etc photo attached. I have tried checking a scan with alternate feed wires and get different results but still no standard terrestrial channels.
I did also try scanning via ABM and it failed as per the enclosed pic.
Thanks in advance.