ronaldbiggs
Newbie
Hi I have just got a 8008 and have setup with Willobuild, added a 500gb USB SSD (formatted to ext4). The drive is plugged into the rear USB port, when I reboot from the main GUI the box shutdown but never gets to the boot stage and just hangs. If I plug the same drive in the side USB port it's fine and completes the reboot. The hard drive has just been taken from my laptop so it's a known working drive
I have checked the mount manager and can see it's mounted as /dev/sdb1 with the mount point /media/HDD and shows as ext4 R/W. The drive is correctly mounted from both USB ports so assume it's not a faulty port.
I have also reflashed the box a couple of times and tried just a base VIX image with the same outcome
Only had the box about 1 month so returning is an option if required. Thanks for any advice
Regards
Ron
I have checked the mount manager and can see it's mounted as /dev/sdb1 with the mount point /media/HDD and shows as ext4 R/W. The drive is correctly mounted from both USB ports so assume it's not a faulty port.
I have also reflashed the box a couple of times and tried just a base VIX image with the same outcome
Only had the box about 1 month so returning is an option if required. Thanks for any advice
Regards
Ron