Flash problems

gregnic32

Member
l am trying to reflash me Zgemma H5.2tc box with Wooshbuild and it will flash then goes to the flash Ahhhhh stage and goes for a few minutes then nothing, l have tried different pens and reformatted etc but no joy. l used to be able to flash them no problem. Help urgently needed please.
 
Hello

Yesterday my box went into boot on its own and stayed like that. It doesn't even start to count. It just says boot. When I try to reflash it, the new version of wooshbuild goes to FLSH then starts to go between FLSH and BOOT. And old version of wooshbuild goes to FLSH for a few seconds then back to and stays on BOOT.

Can anyone help or has my Zgemma packed in?
 
Did you sort it ? mines done the same today tried 3 different build with no luck

You need to format the usb with fat32 before you start
and you may need to try a different usb as a lot of people end up trying four or five before they find one that works

what error message are you getting?
 
You need to format the usb with fat32 before you start
and you may need to try a different usb as a lot of people end up trying four or five before they find one that works

what error message are you getting?
Tried it with 2 different key pens flashing to fat32 never had this issue before it's starts to flash then goes back into boot and stays like that I'm getting no error messages starting to lose the plot here lol cheers for the reply
 
please explain in detail what you have done when you attempted to flash the box.
I've flashed key pen to fat32 then downloaded wooshbuld & grogbuild put woodhbuild onto the key pen put into the back of the box it come up saying flash then straight away just says boot and stays like that on both builds. I've done Thisbe loads of time don't get what's going on this is with 2 boxes very strange
 
you posted in the wooshbuild support thread last November that these same 3 usb sticks wouldn't flash wooshbuild and you had to revert back to an older build.
Have you tried a no frills version of openatv as suggested earlier?
 
you posted in the wooshbuild support thread last November that these same 3 usb sticks wouldn't flash wooshbuild and you had to revert back to an older build.
Have you tried a no frills version of openatv as suggested earlier?

its wasnt the keypens m8 it was a missing file in wooshbuild that wouldnt let me flash the box at all ive flashed it a few times since then with no problem yeah gonna give that a try cheers for the help
 
you posted in the wooshbuild support thread last November that these same 3 usb sticks wouldn't flash wooshbuild and you had to revert back to an older build.
Have you tried a no frills version of openatv as suggested earlier?


just tried openatv-6.2 and its doing the same starts to flash for about 10 seconds then just goes back to boot doing my head in this now lol
 
Back
Top