Blank h2h

[Beddy 007]

My zgemma h2 h has power to it because it feels warm boot light slowly faded then nothing not even reconise ethanet cable no digital display shall i show it a big hammer help please

 

[TheMacMan]

Have you tried to flash it.

 

[pabloescaban]

My zgemma h2 h has power to it because it feels warm boot light slowly faded then nothing not even reconise ethanet cable no digital display shall i show it a big hammer help please

Try a different power supply.
if you can get it to boot up, you can reflash it and carry on using it...90% certain it's the PSU failed

 

[Beddy 007]

Try a different power supply.
if you can get it to boot up, you can reflash it and carry on using it...90% certain it's the PSU failed

Tried different power supply carnt get it to boot stuck with it i think cheers any help is much appreciated

 

[pabloescaban]

Tried different power supply carnt get it to boot stuck with it i think cheers any help is much appreciated

What ampage are the PSU's you've tried?
Try a 3A one if you can get one, there's some on ebay

 

[Beddy 007]

What ampage are the PSU's you've tried?
Try a 3A one if you can get one, there's some on ebay

Tried the lead from my h2s mate still no joy thanks

 

[Beddy 007]

Tried the lead from my h2s mate still no joy thanks

Could it be inside the box where the problem is

 

[pabloescaban]

unlikely.
It needs a lot of power to boot up.
what ampage are the power supplies you've tried?
Zgemma PSU's are well known to fail, try a new one, higher Ampage and it will boot up

 

[Beddy 007]

unlikely.
It needs a lot of power to boot up.
what ampage are the power supplies you've tried?
Zgemma PSU's are well known to fail, try a new one, higher Ampage and it will boot up

I bought a new h9s should i try that power supply

 

[Beddy 007]

I bought a new h9s should i try that power supply

The ampage is 2.0

 

[pabloescaban]

The ampage is 2.0

Yes, try it on the H2h to see if it boots up

 

[Beddy 007]

Yes, try it on the H2h to see if it boots up

Will try it would not on my h2s power must be getting to it because it feels warm