If when you turn on your receiver you are presented with just a flashing red dot on the LED panel this guide will get it back up and running.
Turn the box of via the rocker switch at the back.
When turning it back on hold the Menu button down on the front of the box, keep it pressed until you see this on your screen.
With the USB Adapter plugged in with the firmware on it select USB Download [Auto select] by pressing ok on your remote.
It will then start to search for the firmware on your USB adapter.
It will then find the firmware on the USB adapter and start to automatically install it.
It will run through the upgrade process, it can take a little while to finnish as it runs through 3 process updates.
Once finished it will auto reboot and run through the normal start up procedure.
Done :happy:
[SUB]Tutorial made by HiTeck for Techkings members, if you have to copy it please leave the watermarks in tact.[/SUB]
There can be other problems that cause this issue, faulty LNB also bad connection / coaxial.
Turn the box of via the rocker switch at the back.
When turning it back on hold the Menu button down on the front of the box, keep it pressed until you see this on your screen.
With the USB Adapter plugged in with the firmware on it select USB Download [Auto select] by pressing ok on your remote.
It will then start to search for the firmware on your USB adapter.
It will then find the firmware on the USB adapter and start to automatically install it.
It will run through the upgrade process, it can take a little while to finnish as it runs through 3 process updates.
Once finished it will auto reboot and run through the normal start up procedure.
Done :happy:
[SUB]Tutorial made by HiTeck for Techkings members, if you have to copy it please leave the watermarks in tact.[/SUB]
There can be other problems that cause this issue, faulty LNB also bad connection / coaxial.