What's new
By:
Filters

Cable Can’t switch between boot slots. Also Root password incorrect

G

Goodolpete

Member
Hi. Id be grateful for any advice on the following……
I had
boot 1 VIX 5.4
boot 2. Blank
boot 3. VIX 60003 normal booting slot
boot 4 ATV7

Ive Booted to slot 4 and can’t get out.
I select multi boot , it says “collecting slot information please wait” then shows this screen below.
PROBLEM 2 ftp to box from laptop enter root / root as user/Password and it says password incorrect. How can I change password?

IMG_0236.jpeg
 
Goodolpete said:
Hi. Id be grateful for any advice on the following……
I had
boot 1 VIX 5.4
boot 2. Blank
boot 3. VIX 60003 normal booting slot
boot 4 ATV7

Ive Booted to slot 4 and can’t get out.
I select multi boot , it says “collecting slot information please wait” then shows this screen below.
PROBLEM 2 ftp to box from laptop enter root / root as user/Password and it says password incorrect. How can I change password?

View attachment 97023
Click to expand...
To change password in openatv
Menu, setup, system, network, password settings
 
Sorry, it doesnt recognise the log as a txt file. Here are the contents.
Is there a way of booting back to slot 3 ?

openATV Enigma2 crash log

crashdate=Sun Nov 26 12:35:19 2023
compiledate=Dec 4 2022
skin=slyk-onyx-1080/skin.xml
sourcedate=2022-12-03
branch=7.0
rev=31972+b3a3720
component=enigma2, signal

stbmodel=h7
stbmodel=h7
kernelcmdline=brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p8 rootsubdir=linuxrootfs4 kernel=/dev/mmcblk0p6 rw rootwait h7_4.boxmode=1 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200
nimsockets=NIM Socket 0:
imageversion=box_type=zgemmah7
imageissue=Welcome to openATV for %h


07:23:56.8043 [Enigma] Python path is '/usr/lib/enigma2/python'.
07:23:56.8046 [Enigma] DVB API version 5, DVB API version minor 11.
07:23:56.8046 [Enigma] Enigma debug level 3.
12:34:10.5728 [eServicePeer] REMOVE Peer zgemmah7
12:34:10.5731 [eServicePeer] REMOVE Peer zgemmah7
12:34:58.4573 [eDVBPESReader] Created. Opening demux
12:34:58.4575 [eDVBPESReader] Created. Opening demux
12:35:19.1522 Traceback (most recent call last):
12:35:19.1523 File "/usr/lib/enigma2/python/Components/Console.py", line 52, in finishedCB
12:35:19.1528 File "/usr/lib/enigma2/python/Tools/MultiBoot.py", line 377, in analyzeSlot
12:35:19.1532 TypeError: %d format: a number is required, not str
12:35:19.1533 PC: b65b53e0
12:35:19.1533 Fault Address: f9c1665f
12:35:19.1533 Error Code:: 518
12:35:19.1536 Backtrace:
12:35:19.1537 /usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x76244]
12:35:19.1538 /lib/libc.so.6(__default_rt_sa_restorer) [0xB610AC00]
12:35:19.1539 -------FATAL SIGNAL


dmesg

<6>[ 0.000000] Booting Linux on physical CPU 0x0
<5>[ 0.000000] Linux version 4.10.12 (oe-user@oe-host) (gcc version 11.2.0 (GCC) ) #1 SMP Fri Sep 16 11:43:44 UTC 2022
<6>[ 0.000000] CPU: ARMv7 Processor [420f00f3] revision 3 (ARMv7), cr=30c5387d
<6>[ 0.000000] CPU: div instructions available: patching division code
<6>[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
<6>[ 0.000000] OF: fdt:Machine model: BCM97251SSV
<6>[ 0.000000] cma: Reserved 440 MiB at 0x0000000014800000
<6>[ 0.000000] cma: Reserved 192 MiB at 0x0000000030000000
<3>[ 0.000000] cma: Failed to reserve 440 MiB
<3>[ 0.000000] cma: Failed to reserve 192 MiB
<6>[ 0.000000] Memory policy: Data cache writealloc
<7>[ 0.000000] On node 0 totalpages: 262144
<7>[ 0.000000] free_area_init_node: node 0, pgdat c0946c00, node_mem_map d3e1c000
<7>[ 0.000000] Normal zone: 1728 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 196608 pages, LIFO batch:31
<7>[ 0.000000] HighMem zone: 65536 pages, LIFO batch:15
<6>[ 0.000000] percpu: Embedded 14 pages/cpu @d3ddd000 s26764 r8192 d22388 u57344
<7>[ 0.000000] pcpu-alloc: s26764 r8192 d22388 u57344 alloc=14*4096
<7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
<6>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260416
<5>[ 0.000000] Kernel command line: brcm_cma=440M@328M brcm_cma=192M@768M root=/dev/mmcblk0p8 rootsubdir=linuxrootfs4 kernel=/dev/mmcblk0p6 rw rootwait h7_4.boxmode=1 brcm_cma=440M@328M brcm_cma=192M@768M console=ttyS0,115200
<6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[ 0.000000] Memory: 380416K/1048576K available (6807K kernel code, 365K rwdata, 1824K rodata, 352K init, 216K bss, 20992K reserved, 647168K cma-reserved, 65536K highmem)
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
<5>[ 0.000000] vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
<5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
<5>[ 0.000000] .text : 0xc0008000 - 0xc06ae390 (6809 kB)
<5>[ 0.000000] .init : 0xc08a4000 - 0xc08fc000 ( 352 kB)
<5>[ 0.000000] .data : 0xc08fc000 - 0xc09577d0 ( 366 kB)
<5>[ 0.000000] .bss : 0xc0959000 - 0xc098f044 ( 217 kB)
<6>[ 0.000000] Hierarchical RCU implementation.
<6>[ 0.000000] Build-time adjustment of leaf fanout to 32.
<6>[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
<6>[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=2
<6>[ 0.000000] NR_IRQS:16 nr_irqs:16 16
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0805000, parent irq: 16)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0807000, parent irq: 17)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf0809640, parent irq: 18)
<6>[ 0.000000] irq_brcmstb_l2: registered L2 intc (mem: 0xf080b200, parent irq: 19)
<6>[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xfc40a700, parent IRQ(s): 2)
<6>[ 0.000000] irq_bcm7120_l2: registered BCM7120 L2 intc (mem: 0xf080d380, parent IRQ(s): 3)
<6>[ 0.000000] brcmstb: biuctrl: MCP: Write pairing already disabled
<6>[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 27.00MHz (virt).
<6>[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x63a1e71a3, max_idle_ns: 440795203123 ns
<6>[ 0.000003] sched_clock: 56 bits at 27MHz, resolution 37ns, wraps every 4398046511093ns
<6>[ 0.000010] Switching to timer-based delay loop, resolution 37ns
<6>[ 0.000279] Console: colour dummy device 80x30
<6>[ 0.000299] Calibrating delay loop (skipped), value calculated using timer frequency.. 54.00 BogoMIPS (lpj=27000)
<6>[ 0.000307] pid_max: default: 32768 minimum: 301
<6>[ 0.000414] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000419] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
<6>[ 0.000891] CPU: Testing write buffer coherency: ok
<6>[ 0.001135] CPU0: update cpu_capacity 1024
<6>[ 0.001141] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
<6>[ 0.001353] Setting up static identity map for 0x8440 - 0x8498
<6>[ 0.003343] smp: Bringing up secondary CPUs ...
<6>[ 0.004057] CPU1: update cpu_capacity 1024
<6>[ 0.004060] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
<6>[ 0.004126] smp: Brought up 1 node, 2 CPUs
<6>[ 0.004137] SMP: Total of 2 processors activated (108.00 BogoMIPS).
<6>[ 0.004143] CPU: All CPU(s) started in SVC mode.
<6>[ 0.004544] devtmpfs: initialized
<6>[ 0.010584] VFP support v0.3: implementor 42 architecture 4 part 00 variant 0 rev 0
<6>[ 0.010779] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
<6>[ 0.010799] futex hash table entries: 512 (order: 3, 32768 bytes)
<6>[ 0.024927] NET: Registered protocol family 16
<6>[ 0.025292] DMA: preallocated 256 KiB pool for atomic coherent allocations
<6>[ 0.030397] cpuidle: using governor ladder
<6>[ 0.034350] cpuidle: using governor menu
<6>[ 0.043295] No ATAGs?
<6>[ 0.043381] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
<6>[ 0.043389] hw-breakpoint: maximum watchpoint size is 8 bytes.
<5>[ 0.057912] SCSI subsystem initialized
<7>[ 0.058762] libata version 3.00 loaded.
<6>[ 0.058991] usbcore: registered new interface driver usbfs
<6>[ 0.059042] usbcore: registered new interface driver hub
<6>[ 0.059087] usbcore: registered new device driver usb
<6>[ 0.059153] Linux cec interface: v0.10
<6>[ 0.059198] Linux video capture interface: v2.00
<6>[ 0.059268] pps_core: LinuxPPS API ver. 1 registered
<6>[ 0.059275] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
<6>[ 0.059295] PTP clock support registered
<6>[ 0.059855] Advanced Linux Sound Architecture Driver Initialized.
<6>[ 0.060461] clocksource: Switched to clocksource arch_sys_counter
<5>[ 0.060664] FS-Cache: Loaded
<6>[ 0.066682] NET: Registered protocol family 2
<6>[ 0.067068] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
<6>[ 0.067109] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
<6>[ 0.067181] TCP: Hash tables configured (established 8192 bind 8192)
<6>[ 0.067267] UDP hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.067293] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
<6>[ 0.067406] NET: Registered protocol family 1
<6>[ 0.067785] RPC: Registered named UNIX socket transport module.
<6>[ 0.067790] RPC: Registered udp transport module.
<6>[ 0.067793] RPC: Registered tcp transport module.
<6>[ 0.067797] RPC: Registered tcp NFSv4.1 backchannel transport module.
<7>[ 0.067804] PCI: CLS 0 bytes, default 64
<6>[ 0.068918] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
<6>[ 0.070274] workingset: timestamp_bits=14 max_order=18 bucket_order=4
<5>[ 0.070763] FS-Cache: Netfs 'nfs' registered for caching
<5>[ 0.070895] NFS: Registering the id_resolver key type
<5>[ 0.070913] Key type id_resolver registered
<5>[ 0.070917] Key type id_legacy registered
<6>[ 0.070927] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
<6>[ 0.070932] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
<5>[ 0.071073] FS-Cache: Netfs 'cifs' registered for caching
<5>[ 0.071124] Key type cifs.spnego registered
<6>[ 0.071253] fuse init (API version 7.26)
<6>[ 0.073323] bounce: pool size: 64 pages
<6>[ 0.073373] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
<6>[ 0.073382] io scheduler noop registered
<6>[ 0.073388] io scheduler deadline registered
<6>[ 0.073424] io scheduler cfq registered (default)
<6>[ 0.073790] brcm-gisb-arb f0400000.gisb-arb: registered mem: f0a09000, irqs: 47, 48
<6>[ 0.074102] brcm-sata-phy f0458100.sata-phy: registered 1 port(s)
<6>[ 0.074493] brcm-cma brcm-cma.0: Initialized Broadcom CMA root device
<6>[ 0.075115] brcm-cma brcm-cma.0: Added CMA device @ PA=0x14800000 LEN=0x1b800000
<6>[ 0.075703] brcm-cma brcm-cma.1: Added CMA device @ PA=0x30000000 LEN=0xc000000
<6>[ 0.109369] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
<6>[ 0.110898] console [ttyS0] disabled
<6>[ 0.110938] f040a900.serial: ttyS0 at MMIO 0xf040a900 (irq = 34, base_baud = 5062500) is a 16550A
<6>[ 0.822771] console [ttyS0] enabled
<6>[ 0.826844] f040a940.serial: ttyS1 at MMIO 0xf040a940 (irq = 35, base_baud = 5062500) is a 16550A
<6>[ 0.836171] f040a980.serial: ttyS2 at MMIO 0xf040a980 (irq = 36, base_baud = 5062500) is a 16550A
<6>[ 0.852282] brd: module loaded
<6>[ 0.859056] loop: module loaded
<3>[ 0.863046] OF: /rdb/sata@f045a000/sata-port@0: could not get #phy-cells for /rdb/sata-phy@f0458100
<4>[ 0.872214] brcm-ahci f045a000.sata: masking port_map 0x3 -> 0x1
<6>[ 0.878287] brcm-ahci f045a000.sata: SSS flag set, parallel bus scan disabled
<6>[ 0.895529] brcm-ahci f045a000.sata: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl platform mode
<6>[ 0.904511] brcm-ahci f045a000.sata: flags: 64bit ncq sntf stag pm clo pmp slum part
<6>[ 0.913626] scsi host0: brcm-ahci
<6>[ 0.917217] scsi host1: brcm-ahci
<6>[ 0.920706] ata1: SATA max UDMA/133 mmio [mem 0xf045a000-0xf045aa9b] port 0x100 irq 44
<6>[ 0.928638] ata2: DUMMY
<6>[ 0.931096] brcm-ahci f045a000.sata: Broadcom AHCI SATA3 registered
<6>[ 0.938238] libphy: Fixed MDIO Bus: probed
<6>[ 0.942648] bcmgenet f0b00000.ethernet: GENET 4.5 EPHY: 0x1001
<6>[ 0.960455] libphy: bcmgenet MII bus: probed
<6>[ 0.987423] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
<6>[ 0.993275] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
<6>[ 1.018227] ehci-brcm: EHCI BRCM driver
<6>[ 1.022186] ehci-brcm f0470300.ehci: EHCI Host Controller
<6>[ 1.027619] ehci-brcm f0470300.ehci: new USB bus registered, assigned bus number 1
<6>[ 1.045317] ehci-brcm f0470300.ehci: irq 147, io mem 0xf0470300
<6>[ 1.057455] ehci-brcm f0470300.ehci: USB 2.0 started, EHCI 1.00
<6>[ 1.063915] hub 1-0:1.0: USB hub found
<6>[ 1.067704] hub 1-0:1.0: 1 port detected
<6>[ 1.071905] ehci-brcm f0470500.ehci: EHCI Host Controller
<6>[ 1.077331] ehci-brcm f0470500.ehci: new USB bus registered, assigned bus number 2
<6>[ 1.095016] ehci-brcm f0470500.ehci: irq 148, io mem 0xf0470500
<6>[ 1.107456] ehci-brcm f0470500.ehci: USB 2.0 started, EHCI 1.00
<6>[ 1.113821] hub 2-0:1.0: USB hub found
<6>[ 1.117605] hub 2-0:1.0: 1 port detected
<6>[ 1.121731] ohci-brcm: OHCI BRCM driver
<6>[ 1.125720] ohci-brcm f0470400.ohci: BRCM OHCI controller
<6>[ 1.131144] ohci-brcm f0470400.ohci: new USB bus registered, assigned bus number 3
<6>[ 1.138790] ohci-brcm f0470400.ohci: irq 149, io mem 0xf0470400
<6>[ 1.200832] hub 3-0:1.0: USB hub found
<6>[ 1.204619] hub 3-0:1.0: 1 port detected
<6>[ 1.208762] ohci-brcm f0470600.ohci: BRCM OHCI controller
<6>[ 1.214187] ohci-brcm f0470600.ohci: new USB bus registered, assigned bus number 4
<6>[ 1.221828] ohci-brcm f0470600.ohci: irq 150, io mem 0xf0470600
<6>[ 1.222462] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
<6>[ 1.222601] ata1.00: ATA-11: PNY CS900 240GB SSD, CS900BB3, max UDMA/133
<6>[ 1.222605] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32)
<6>[ 1.222719] ata1.00: configured for UDMA/133
<5>[ 1.223071] scsi 0:0:0:0: Direct-Access ATA PNY CS900 240GB 0BB3 PQ: 0 ANSI: 5
<5>[ 1.274139] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
<5>[ 1.281714] sd 0:0:0:0: Attached scsi generic sg0 type 0
<5>[ 1.287119] sd 0:0:0:0: [sda] Write Protect is off
<7>[ 1.291935] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
<5>[ 1.292054] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
<6>[ 1.303514] sda: sda1
<5>[ 1.306714] sd 0:0:0:0: [sda] Attached SCSI disk
<6>[ 1.316020] hub 4-0:1.0: USB hub found
<6>[ 1.319816] hub 4-0:1.0: 1 port detected
<6>[ 1.323960] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[ 1.330521] ehci-pci: EHCI PCI platform driver
<6>[ 1.335038] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
<6>[ 1.341243] ohci-pci: OHCI PCI platform driver
<6>[ 1.346153] xhci-hcd f0471000.xhci: xHCI Host Controller
<6>[ 1.351506] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 5
<6>[ 1.359232] xhci-hcd f0471000.xhci: hcc params 0x0250f17d hci version 0x100 quirks 0x00010010
<6>[ 1.367809] xhci-hcd f0471000.xhci: irq 151, io mem 0xf0471000
<6>[ 1.374346] hub 5-0:1.0: USB hub found
<3>[ 1.378142] hub 5-0:1.0: config failed, hub doesn't have any ports! (err -19)
<6>[ 1.385405] xhci-hcd f0471000.xhci: xHCI Host Controller
<6>[ 1.390740] xhci-hcd f0471000.xhci: new USB bus registered, assigned bus number 6
<6>[ 1.398281] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
<6>[ 1.406753] hub 6-0:1.0: USB hub found
<6>[ 1.410543] hub 6-0:1.0: 2 ports detected
<6>[ 1.414850] usbcore: registered new interface driver uas
<6>[ 1.420253] usbcore: registered new interface driver usb-storage
<6>[ 1.426358] usb 1-1: new high-speed USB device number 2 using ehci-brcm
<6>[ 1.433150] mousedev: PS/2 mouse device common for all mice
<6>[ 1.439035] i2c /dev entries driver
<6>[ 1.442823] IR NEC protocol handler initialized
<6>[ 1.447372] IR RC5(x/sz) protocol handler initialized
<6>[ 1.452441] IR RC6 protocol handler initialized
<6>[ 1.456996] IR JVC protocol handler initialized
<6>[ 1.461537] IR Sony protocol handler initialized
<6>[ 1.466165] IR SANYO protocol handler initialized
<6>[ 1.470880] IR Sharp protocol handler initialized
<6>[ 1.475595] IR MCE Keyboard/mouse protocol handler initialized
<6>[ 1.481439] IR XMP protocol handler initialized
<6>[ 1.485978] smssdio: Siano SMS1xxx SDIO driver
<6>[ 1.490427] smssdio: Copyright Pierre Ossman
<6>[ 1.495091] sdhci: Secure Digital Host Controller Interface driver
<6>[ 1.501284] sdhci: Copyright(c) Pierre Ossman
<6>[ 1.505649] sdhci-pltfm: SDHCI platform and OF driver helper
<6>[ 1.515863] hub 1-1:1.0: USB hub found
<6>[ 1.520032] hub 1-1:1.0: 4 ports detected
<6>[ 1.542461] mmc0: SDHCI controller on f03e0200.sdhci [f03e0200.sdhci] using ADMA
<6>[ 1.550046] hidraw: raw HID events driver (C) Jiri Kosina
<6>[ 1.555656] usbcore: registered new interface driver usbhid
<6>[ 1.561247] usbhid: USB HID core driver
<6>[ 1.567694] NET: Registered protocol family 17
<5>[ 1.572212] Key type dns_resolver registered
<6>[ 1.576548] ThumbEE CPU extension supported.
<5>[ 1.580836] Registering SWP/SWPB emulation handler
<6>[ 1.593141] ALSA device list:
<6>[ 1.596140] No soundcards found.
<6>[ 1.600375] Freeing unused kernel memory: 352K
<4>[ 1.604838] This architecture does not have kernel memory protection.
<6>[ 1.683900] mmc0: new high speed MMC card at address 0001
<6>[ 1.689750] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
<6>[ 1.694427] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
<6>[ 1.700522] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
<6>[ 1.706574] mmcblk0rpmb: mmc0:0001 4FPD3R partition 3 512 KiB
<6>[ 1.715519] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
<6>[ 1.729550] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
<6>[ 1.809476] usb 1-1.4: new full-speed USB device number 3 using ehci-brcm
<5>[ 1.823100] random: fast init done
<4>[ 1.992415] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
<6>[ 2.026796] Adding 262140k swap on /dev/mmcblk0p7. Priority:-1 extents:1 across:262140k SS
<6>[ 2.545166] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
<4>[ 2.803282] h7_1: module_layout: kernel tainted.
<4>[ 2.807933] Disabling lock debugging due to kernel taint
<4>[ 2.813262] h7_1: loading out-of-tree module taints kernel.
<6>[ 2.820031] usbcore: registered new interface driver tpm
<4>[ 7.126214] hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh
<5>[ 7.189874] random: crng init done
<6>[ 8.366614] input: front panel as /devices/virtual/input/input0
<6>[ 8.376242] input: dreambox remote control (native) as /devices/virtual/input/input1
<6>[ 8.385106] input: dreambox advanced remote control (native) as /devices/virtual/input/input2
<6>[ 8.401157] dvbdev: DVB: registering new adapter (dvb0)
<6>[ 8.408198] platform dvb0.0: DVB: registering adapter 0 frontend 0 (DVB-S2)...
<6>[ 8.416763] platform dvb0.0: DVB: registering adapter 0 frontend 1 (DVB-T/T2/C)...
<6>[ 8.425020] platform dvb0.0: DVB: registering adapter 0 frontend 2 (DVB-T/T2/C)...
<6>[ 8.663312] input: front panel as /devices/virtual/input/input3
<6>[ 8.691933] Registered IR keymap rc-cec
<6>[ 8.696184] input: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0/input4
<6>[ 8.703733] rc rc0: RC for hdmi_cec as /devices/platform/hdmi.0/rc/rc0
<6>[ 8.814797] SGI XFS with security attributes, realtime, no debug enabled
<6>[ 9.191003] EXT4-fs (mmcblk0p8): re-mounted. Opts: data=ordered
<6>[ 10.878713] NET: Registered protocol family 10
<6>[ 10.884036] Segment Routing with IPv6
<6>[ 11.064459] f0b00000.etherne:01: Broadcom BCM7439 (2) PHY revision: 0x10, patch: 1
<6>[ 11.073792] bcmgenet f0b00000.ethernet: configuring instance for internal PHY
<6>[ 11.081055] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[ 14.534027] bcmgenet f0b00000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
<6>[ 14.542373] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<3>[ 22.137875] blk_update_request: I/O error, dev mmcblk0rpmb, sector 0
<3>[ 22.173931] blk_update_request: I/O error, dev mmcblk0rpmb, sector 0
<6>[ 105.066037] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
 
Goodolpete said:
Thanks pablo. I attach the crash files, Can you see any way I can resolve this and boot back to slot 3?
Click to expand...
I'd remove any usb or hdd drives and power off at the back and reboot.
When did you flash atv 7 to slot4?
If its a new flash it may need reflashing
 
A year or so ago, maybe 2.
I’ve tried the flash online option for most of the ATV and VIX previous and latest versions, and in each case I get the same screen as my original post.
 
Last edited:
I found this 5 yr old post from Grog. Do you think it will work?

“Now paste all the code below into the terminal window. (right click on the terminal window to paste)

wget --no-check-certificate -O install_vix.sh https://www.dropbox.com/s/hc2cdr116lvx3dj/install_vix.sh?dl=1 && bash install_vix.sh

after a few seconds you will be asked to select the brand of your box by entering the number next to the brand of your box, you will then be asked to select the actual box you are flashing from another list, again enter the number next to your box.

Now you are prompted which partition you want flashed, this is for boxes with multiboot, if you don't use multiboot or your box doesn't have multiboot facilities just hit the enter key, if you are using multiboot enter the partition number and then press enter key. (Thanks to @Willo3092 for suggesting and testing Multiboot flashing)

The latest stable build will then be downloaded to /media/hdd and your box flashed.

I am sure this will be copied, made into a plugin of some kind or added to another build but remember you saw it here first :)”
 
Try flashing ATV 7.3 on the current image using the remote control. This is simplest way to resolve the issue for you. Otherwise you will have to FTP into box and start renaming some bootup files
 
Abu Baniaz said:
Try flashing ATV 7.3 on the current image using the remote control. This is simplest way to resolve the issue for you. Otherwise you will have to FTP into box and start renaming some bootup files
Click to expand...
Hi, Abu. as per post 6, I get the same blue screen for all the ATV and VIX versions displayed.
 
I don't know this box but it looks a similar set up to the qviart dual and it may have a similar chipset. On the qviart dual you can turn if off and back on and whilst it boots pressing 1111111111 or 22222222 or 333333333 for example boots into the other slots. Not sure if this helps.
 
kegnkiwi said:
I don't know this box but it looks a similar set up to the qviart dual and it may have a similar chipset. On the qviart dual you can turn if off and back on and whilst it boots pressing 1111111111 or 22222222 or 333333333 for example boots into the other slots. Not sure if this helps.
Click to expand...
Hi. Have just tried this and it still booted into slot 4
thanks for the suggestion
 
I'm not sure what the boot files are called on a H7, but I use this script in putty to change partition if my box hangs.

Bash: 
#!/bin/bash
init 4
cd /boot
cp STARTUP_LINUX_3 STARTUP
reboot
exit 0
 
Willo3092 said:
I'm not sure what the boot files are called on a H7, but I use this script in putty to change partition if my box hangs.

Bash: 
#!/bin/bash
init 4
cd /boot
cp STARTUP_LINUX_3 STARTUP
reboot
exit 0
Click to expand...
they’re called STARTUP_1 and so on.
where do you put the script ?
Doh. Looking at the script, it will go in base directory.
 
WOW, THANKS GUYS.
login as: root
root@192.168.1.85's password:
root@zgemmah7:~# pwd
/home/root
root@zgemmah7:~# ls
logs
root@zgemmah7:~# cd ..
root@zgemmah7:/home# cd ..
root@zgemmah7:/# ls
Slot3.sh boot dev hdd lib media? proc sbin sys usr
bin control etc home media mnt run share tmp var
root@zgemmah7:/# #!/bin/bash
root@zgemmah7:/# init 4
root@zgemmah7:/# cd /boot
root@zgemmah7:/boot# cp STARTUP_3 STARTUP
root@zgemmah7:/boot# reboot

Broadcast message from root@zgemmah7 (pts/0) (Sun Nov 26 15:59:25 2023):

The system is going down for reboot NOW!
 
You must log in or register to reply here.
Back
Top