it may be a generic simple size replacement blade, and not the actual proper curve blade,Maybe fitting of blade is not correct,recheck fitting as blade is suppose to swivel on arm.
If a refill was fitted it might be too wide and not move in the arms to allow to adjust to curve of screen.
Okay google suggests its the plastic special type on yours and it can only be fitted the correct way.
Ford Fiesta 2008-2017 rear Wiper Arm and blade Direct replacement Quality! | eBay
not sure where that info is coming fromIt has to be a specific type as the bar on the plastic blade is thicker and ordinary blade dont fit it.
These new blades mean more stock on the shelf and not only needed but 7 or 8 pain in the butt.
Big sale of wipers motors linkages due to stuck on screen over the weekend.
no mate, the arm lifts up okay as far as I can tell. it appears that the arm itself just gets lifted off the screen for no reason.Maybe it does not come to contact with the glass,but does movement lifting up the arm away from screen be loose/free or seized?
Here you go some pictures:So arm has good movement as in free and the spring pull it back to the screen as in post 2,if no spring its broken and no force to hold it in place.
The same if you lifted front wiper arm off the screen 6" it wants to go back to its seated position sitting on the screen.
Stick up a photo
Arm is attached by a nut attached to wiper spindle under the cover.
Thats what the man from the car parts shop did when I first noticed it. Think it needs a replacement really which in reality means its staying as is lolSpring is still there put newspaper under the arm and spray wd40 on the hinged part as can partially seize lift up and down for a few minutes will help it release and go back on screen correctly.