tornado
Member
How to flash your box using a rs232 cable
1.Connect your rs232 cable to your f3 and to your pc
2.Plug the power cable of your f3 in but dont turn it on at the back of your box yet.
3.Start EROM upgrade.exe
4.Select your com port should say com1
5.Operate mode should be set as Upgrade
6.Click the Browse button and select your firmware u want to load.
7.Tick the include bootloader and click next.
8.When the screen shows Synchronizing STBS turn your box on at the back and when it shows Done press the power button on the front off your box once.
9,Wait for the firmware uploading process finish then click next.
10.Wait for the firmware flashing process to finish then click finish.
1.Connect your rs232 cable to your f3 and to your pc
2.Plug the power cable of your f3 in but dont turn it on at the back of your box yet.
3.Start EROM upgrade.exe
4.Select your com port should say com1
5.Operate mode should be set as Upgrade
6.Click the Browse button and select your firmware u want to load.
7.Tick the include bootloader and click next.
8.When the screen shows Synchronizing STBS turn your box on at the back and when it shows Done press the power button on the front off your box once.
9,Wait for the firmware uploading process finish then click next.
10.Wait for the firmware flashing process to finish then click finish.
Code:
http://www.4shared.com/zip/lCZg2oo8/f3_x3_m3_q3_rs232_upgradetool
Last edited by a moderator: