net id confusion

[woopac1]

hi guys I'm a newbie here so any help grateful I was given a test line for a oscam got 3 files when unzipped put them in relevant folders did scans get channels found but no picture started softcam ect but how do I know I'm on right net id I live in wigan found the number 40967 is this correct but the only number same as that in list comes up as preston 1 ? help

 

[bees]

What box have you got ?

Wigan TW 40967 531.000 6.952

Net id 40967
Symbol rate 6952 (no decimal point)

If you scan and get about 350 channels then it's probably the right net id.

Try FTA channels like BBC and ITV to check you have a picture.

Then if it's just the $ channels not working it's probably down to your line.

Don't worry about the preston 1 thing, I am in liverpool and mine is described as manchester 3

 

[woopac1]

no picture on FTA thanks I have zgemma h2h

 

[dillyp70]

Make sure your fta arnt set to hd as there encrypted and wont clear till you line is working.

 

[woopac1]

it finds the vm channels but none work I'm using sucemnsees image if that makes any difference I have a sky line that works on the sky side of box but if I choose a vm channel the pictures freezes and thts it

---------- Post Merged at 02:46 PM ----------

thanks for that pal I hadn't checked the fta side of virgin got fta working on virgin now now for the hd side getting there slowly lol

 

[442goals]

ok, try this.

Go to menu > setup > service searching > tuner configuration

make sure tuner b is set to dvb-c
configuration mode - enabled
network id - 40967
used service type scan - provider
provider to scan - vrgin media uk (6952)

green button to save... followed by exit.... open autobouquet maker

(if you dont have autobouquet maker - menu > plugins > green button (download) > system plugins > select utobouquet maker)

---

lol ignore this. Channels scanned just fine it seems as your fta channels are clearing.

 

[woopac1]

am I right to put the 3 oscam files I got for my test line in var/tuxbox/config

 

[442goals]

i assume your getting blank screen....

ok follow this...

ftp to the box, recommend filezilla, simple interface. Go to /usr/keys .... delete everything but newcamd.list and mg_cfg file

'right click' on mg_cfg file and 'edit'

paste the following code inside, then save

# EMM messages#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 01 }


# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }


# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 02 }


# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0


# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }


# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
#    32	cccamd netclient, card list saved as /tmp/cccamd.info 
#    	(ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }


# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 5 30


# network ecm timeout in seconds
K: { 10 }


# newcamd dead routes connect retry, sec
Q: { 600 }


# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }


# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 } username password


# on screen display Options, summ of:
#    01 show emu ecm 
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80


# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log


# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }


# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time 
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }


# reread files, summ of: 
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }


# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }


# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }


# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

now open newcamd.list

paste your CWS line here, save.


Now go to your box > blue button > softca panel > green button to restart cam.....

---------- Post Merged at 03:14 PM ----------

am I right to put the 3 oscam files I got for my test line in var/tuxbox/config

sorry, above post was for mgcamd... which works great with zgemma h.2h

correct location for oscam...