Vhannibal -Abm not working

[cactikid]

Openvix 6.3.02 image and was using VHannibal quad settings and removed from plugins red.
Disabled other sats and have Saorview and Freesat scanned on sat scan and receiving some channels.

ABM Updated and setup does not give me Bouquets and box rebooted .
Not sure if removing Vhannibal settings does something to cache which ABM needs .
Logs attached
Blue button does not have any channel lists on tv or radio

 

[cactikid]

Reflashed new image 6.3.006 and setup from scratch.

Autoscanned 28.2 over 860 channels

Setup providers for freesat or sky roi but list is looking way wrong ?
Longer list on vu solo2
When i run ABM i get an error at the end.

 

[Abu Baniaz]

Screenshots are not as useful as debug log. You know the drill my friend.

Considering nobody else has reported problems, I am presuming it is something in the Vhannibal's channel lists.

 

[cactikid]

But was reflashed and setup from scratch as was doing it late last night and many things not done including logs.

When box was reflashed i only used ABM with a new 28.2 feed and a Saorview feed.

Please refresh my memory to find my logs as been a while Cheers.

 

[Ferret.]

home/root/logs

 

[cactikid]

Hope this is it

 

[Abu Baniaz]

< 55792.6528> [ABM-DvbScanner] Reading transponders...
< 55796.5002> [gRC] main thread is non-idle! display spinner!
< 55812.7029> [ABM-DvbScanner] Timed out reading NIT
< 55812.7038> [ABM-DvbScanner] Added/Updated 0 transponders with network_id = 0x-1
< 55812.7042> [ABM-DvbScanner] Reading services (LCN)...
< 55832.7537> [ABM-DvbScanner] Timed out reading SDT
< 55832.7546> [ABM-DvbScanner] No LCNs found. Falling back to service ID.
< 55832.7549> [ABM-DvbScanner] Read 0 services
< 55832.7554> [ABM-DvbScanner] 0 valid services
< 55832.7561> [ABM-Manager][read] terrestrial_ie_saorview_PSB2, Done
< 55832.7564> [ABM-main][doScan] Cannot read data

Check you aerial wiring/connections by receiver. If you disable Saorview, ABM should complete.

 

[cactikid]

Thanks @Abu Baniaz ,removed Saorview and ran ABM and now see my bouquets.

Later will check my aerial and see what i stuck in , Thanks

 

[Abu Baniaz]

I'd recommend you enable "Add provider name to bouquets" as well as "Enable not-indexed".