Ive tried dsayers and bioheads images and must say they are PERFECT for the H2H. But I wanted to try Wooshbuild 5 see if it was ok?
So I Installed Wooshbuild 5.
Then Menu - Setup - Service Searching - Tuner Configuration - highlight tuner B - Ok - Then change Net ID to your area - then Green button to save.
Exit back to tv. Green button - Red button (remove plugins) - extensions - highlight autobouquets and press ok - (MESSAGE READS Do you want to remove the plugin "extensions-autobouquets"?) Highlight YES and press OK - exit back to tv - ****NOW THE IMPORTANT PART**** Menu - Standby/Restart - RESTART GUI ****It must be (RESTART GUI) and not just restart!!!!!! (If you press just restart Autobouqets E2 will still be there!!!!!!!!)
Green button - Green button (download plugins) - System Plugins - AutobouqetMaker (ABM) - Download then restart box - Menu - Standby/Restart - RESTART GUI.
Menu - Setup - Service Searching - Autobouqemaker - Configure - change setup mode to Expert - Sheduled scan (turn to ON) - change Time of Scan to Whatever time ( I used 5am) - Press Exit - Providers - make sure Virgin U.K. is (ON) - Virgin Swap Channels is (ON) and your Net Id for your area is there . - Press Exit - Start Scan ( Will now Scan for Channels).
Once finished then Menu - Setup - EPG - Settings - Enable Virgin epg ( change to YES the press GREEN button to Save.
Press Exit back to Setup - CrossEpg -Configure - Schedule Download ( change to wherever ( I used (5.15am).
Press Exit - XMLTV PROVIDERS - Sroll down to bottom and choose RYTEC Virgin U.K. XMLTV then press GREEN to enable - Press Yellow to Download - ( once finished make sure there's a tick on Ryteck virgin uk).
Press Exit.
Providers Start Order - Highlight Rytec Virgin and press GREEN button to move up so RYTEC virgin is at the top!
Press Exit - Download Now - Now will Download the Epg.
Then I FTP into box using Filezilla and transferred my newcamd.list file into usr/keys.
Then Blue Button - Press Down Button once - Press Right Button once - (softcam Panel "control your softcams") - press OK - Highlight Select Cam 1 - Press Right Button Twice till it says mgcamd_1.38rl - press GREEN button this will restart cam. - now exit back to tv.
I then downloaded the VirginHD skin and Installed it aswell.
All Virgin Channels working fine including HD and Epg working g a treat!
If I've missed anything out or done something you thinks wrong guys let me know.
Things to NOTE:
1. I left TUNER A as it was.
2. Always check your using the correct NET ID.
3. I was using a N-line in Mgcamd. (But obviously you can use c:line CCCam).
4. This guide is for Cable ONLY!! But you can run Sky with this also.
5. Big thanks to Wooshman (Wooshbuild is a great build mate)
Might help someone if they fancy using Wooshbuild eh!
So I Installed Wooshbuild 5.
Then Menu - Setup - Service Searching - Tuner Configuration - highlight tuner B - Ok - Then change Net ID to your area - then Green button to save.
Exit back to tv. Green button - Red button (remove plugins) - extensions - highlight autobouquets and press ok - (MESSAGE READS Do you want to remove the plugin "extensions-autobouquets"?) Highlight YES and press OK - exit back to tv - ****NOW THE IMPORTANT PART**** Menu - Standby/Restart - RESTART GUI ****It must be (RESTART GUI) and not just restart!!!!!! (If you press just restart Autobouqets E2 will still be there!!!!!!!!)
Green button - Green button (download plugins) - System Plugins - AutobouqetMaker (ABM) - Download then restart box - Menu - Standby/Restart - RESTART GUI.
Menu - Setup - Service Searching - Autobouqemaker - Configure - change setup mode to Expert - Sheduled scan (turn to ON) - change Time of Scan to Whatever time ( I used 5am) - Press Exit - Providers - make sure Virgin U.K. is (ON) - Virgin Swap Channels is (ON) and your Net Id for your area is there . - Press Exit - Start Scan ( Will now Scan for Channels).
Once finished then Menu - Setup - EPG - Settings - Enable Virgin epg ( change to YES the press GREEN button to Save.
Press Exit back to Setup - CrossEpg -Configure - Schedule Download ( change to wherever ( I used (5.15am).
Press Exit - XMLTV PROVIDERS - Sroll down to bottom and choose RYTEC Virgin U.K. XMLTV then press GREEN to enable - Press Yellow to Download - ( once finished make sure there's a tick on Ryteck virgin uk).
Press Exit.
Providers Start Order - Highlight Rytec Virgin and press GREEN button to move up so RYTEC virgin is at the top!
Press Exit - Download Now - Now will Download the Epg.
Then I FTP into box using Filezilla and transferred my newcamd.list file into usr/keys.
Then Blue Button - Press Down Button once - Press Right Button once - (softcam Panel "control your softcams") - press OK - Highlight Select Cam 1 - Press Right Button Twice till it says mgcamd_1.38rl - press GREEN button this will restart cam. - now exit back to tv.
I then downloaded the VirginHD skin and Installed it aswell.
All Virgin Channels working fine including HD and Epg working g a treat!
If I've missed anything out or done something you thinks wrong guys let me know.
Things to NOTE:
1. I left TUNER A as it was.
2. Always check your using the correct NET ID.
3. I was using a N-line in Mgcamd. (But obviously you can use c:line CCCam).
4. This guide is for Cable ONLY!! But you can run Sky with this also.
5. Big thanks to Wooshman (Wooshbuild is a great build mate)
Might help someone if they fancy using Wooshbuild eh!
Last edited: