wooshman
VIP Member
WooshBuild v2.50 - Zgemma H2S OpenATV 5.1 Image
WooshBuild v2.50 includes bits that were missing from v1. Common questions, setup issues and features have been addressed, added or simplified. I have done as much pre-configuration as I can.
*H2H users must use the alternate Bouquet Maker. Instruction 3.1 cover this.
Again, instructions and screen shots for the beginners, I have tried to give a little bit of information about what is going on to try and start you on your way with these great boxes. At the bottom of this huge post is information on changing screen position, changing your ITV region, installing IPTV Player.
Click Here to: Download WooshBuild v2.50 H2S From TechKings Download Area
:no no: DO NOT use this thread to get your first post count - That is what the introduce yourself thread is for: New Member - Please introduce yourself here. :no no:
I have removed support for the H2H using this image, if you choose to use this image on your H2H you do so without support via this thread. It has been brought to my attention that once AutoBouquets E2 has been installed and run, ABM does not like to play causing issues and your box will crash when running a scan on the H2H.
This image is for those who want a sky+ box equivalent with easy setup and a happy misses in no time.
No FTP program required - Included in the zip file is an easy to use Line Transfer folder.
What's New - Minor changes
Following simple step by step instructions, you will have your box up and running in 10 minutes max (ok, maybe 20-30 if first time. I will be gentle with you)
Notes about this image
This entire post looks very scary to the newcomer with a new ZgemmaH2S box. Don't be put off. The guide below will walk you through each step needed to make you box work in about 20 minutes.
There are no instructions about backing up a previously installed line. If your box came pre-installed with a line (able to view Sky channels instantly) , please make sure you have a copy of your details.
If you don't please, read Kiddac's setup guide on page 6 as this covers backing up your pre-installed line. I will not be held responsible for you losing your pre-installed line and Sky channels.
What is required
Ideally two USB drives / Sticks / Flash Drives / USB HDD - Whatever you want or call them. A small USB stick is all that is required to Flash your box using this image. A larger device is advised 16GB bare minimum for recording / pause and rewind.
Connect your box
Satellite cables - top left, bottom right as marked below, the power lead, hdmi lead and network cable.
Feel free to turn it on, have a look around press a few buttons. Whatever you do at the moment will get removed when you flash the box using any image. When you have finished playing, I mean learning, turn off the box using the power button at the back.
How to flash with this image
IMPORTANT: Remove any usb devices or sd cards you may have inserted into you box before moving on. Failure to do so will result in your box NOT FLASHING
1. Make a folder on your desktop and extract all the contents of the zip file into your desktop folder.
2. Format a spare USB stick using the Fat32 file system - ideally this USB stick can be kept safe in a drawer should you need to re-flash your box at anytime.
3. Copy the zgemma folder and it's entire contents to the USB stick
4. With your box turned off, put the USB stick into the zgemmaH2S box using the front USB port (the one behind the flap)
5. Turn on the Box and wait for the letters FLSH to appear on the front screen. It will then change to boot after a minute or two. Once booted remove the USB stick from the front of box an keep in a safe place
6. You box is now flashed and running the latest version of WooshBuild and BBC1 HD will show full screen.
7. Once BBC1 HD is showing, switch off the box at the back and then remove the usb device from the front of the box.
* Anything you do between now could change the setup instructions below. It is your box, play as much as you want, do what you want, but these instructions work in a set order.
What do I do now
1. Initialise your USB device
Insert the USB / HDD that you are going to use for recording, pause and rewind into the rear USB port.
Menu -> setup -> System -> Storage Devices -> Initialisation -> OK button -> Red Button (Initialise) -> OK Button
Your USB device is now being initialised for use with the Zgemma box. This will be used for pause, rewind and the recording of programs, it is also used for the swap file, EPG data and picons. Time to complete this step varies depending on the size of the device. You will be returned to full screen TV when complete.
RESTART YOUR BOX! - do you think I want you to restart your box?
Press and hold the standby button then select Restart to restart the box.
This has just created a timeshift folder and also a movie folder on your USB device
Say hello to the new bootlogo
2. Create a Swap File
3. Change your TV region and rescan channels H2S Users
H2H users must use AutoBouquetsMaker - Instructions are 3.1
H2H Support on this image has been removed. H2H usrs continue without support if you want to. I no longer support H2H boxes - Sorry
Both H2S and H2H users are to continue from here
4. Import your Program Guide (EPG)
If your screen doesn't look like this, answer this question: Is the Entertainment tab selected? If it is and your sky channels have no program guide, go back and check the above steps. If the Entertainment tab is not selected, press the Next> button on your remote to select it.
Once your EPG is populated, press the Exit button
5. Setup Timeshift (Pause, Rewind) and recording
This image is setup for use with a minimum of an 8gb USD device. The larger the device the better, 32gb, 64gb work well. But bigger still gives you more room for recordings.
The recording settings should already be correct, feel free to go in and check the "Default movie location" It should read /media/hdd/movie. Dont forget to press the Green button (Save) when done
Exit right back to the TV
6. Transfer your Line for All channel access - Zgemma H2S & H2H ONLY
Important Note: It is never advised to blindly click on batch files (.bat) when you don't know what they will do. This batch file is safe but if you don't want to do it this way, please download a free ftp client such as Filezilla and then follow Kiddac's guide on how to transfer your line using FTP.
Looking in the folder you created on your desktop at the beginning of this guide, there is a folder called "Put your line on Box". This folder contains everything you need to automatically transfer your line onto the box to allow full channel access.
1. Place either the cccamd.cfg file or newcamd.list file that your provider sent you in to THIS folder. Overwrite any existing files if it asks.
------------------------------------------------------------------------------------------------------------------------------------
If you only received your line details in an email, this bit tells you which file to open and paste your line details into:
If the details you were sent look something like:
N: speed5411.server.org 18000 username pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
or
C: speed5411.server.org 18000 username pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
You need to open the CCcam.cfg file, paste your details in and then save the file
If the details you were sent look something ilke:
CWS_KEEPALIVE = 60
CWS = quickness.server.net 56845 username pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server1
You need to open the newcamd.list file, paste your details in and save the file.
------------------------------------------------------------------------------------------------------------------------------------
2. Double Click the Line_installer.bat file. This will FTP your details directly to the correct place.
UPDATE: At his point Windows may display a Windows Firewall window asking you to allow or deny access. You need to click the "Allow Access" button. This basically lets the Windows FTP program access to the network. Failing to Allow Access will result in no files being transferred to your box and you will have to manually transfer the files.
You will now see a black window looking at you. The final message tells you that if you don't see any errors, everything has worked and you can close the window. So go on, close the window if there were no errors. If there were errors, take a screen shot and post it in this help so we can help.
3. Now Complete the following steps:
3a. Select Channel Sky1 via your EPG and go full screen - Your screen will be blank
3b. Press the Menu button -> Info Panel -> SoftcamPanel
You will arrive at a screen with "Select Cam 1" Highlighted.
The type of file you were sent by your supplier determines what you do next.
If your file is a "newcamd.list"
Press the left arrow button to change "Select Cam 1" to read mgcamd_1.38r1
If your file is a "cccamd.list" or a "CCcam.cfg" file
Press the right arrow button to change "Select Cam 1" to read CCcam 2.3.0
Press Green button - You may get a Info Message appear on the screen for 5 seconds.
(If the black mini TV screen does not start to show Sky 1, go back and change "Select Cam 1" to the different option and press the green button again.
You should now be able to watch Sky channels.
Press the exit button 3 times to return to the TV.
8. Picons - optional but I think they are worth adding
Picons are the little channels logos you see on some screen shots and these instructions guide you through adding them to your EPG and info bars.
9. Software Update Check
Now everything is setup, you can check for any software which has been updated and safely install it as OpenATV 5.1 is safe to update over the air.
Menu -> Setup -> Software management -> Software Update
Once the list has been populated, press the Green Button to update.
Important note: You will always see that CrossEPG will be updated, this is because the version used in this image is locked so it cannot be updated as that later versions will not work with OpenATV 5.1
When complete, press the OK button and select Yes to reboot your box.
Congratulations, you now have a fully setup Zgemma H2S box will all channels with full pause, rewind and recording facility.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
More information and additional steps
HDMI CEC - Already setup on this image. Information only
HDMI CEC lets you control your TV using the zgemma remote. This all depends on your TV and also if it is enabled on your TV.
To setup HMCE CEC follow these simple steps:
IPTV Player
These little boxes do so much more than just sat TV including the ability to stream films, live TV channels and TV series straight from the internet. This build has IPTV Player downloaded and just needs a few more steps to get you streaming direct from the internet.
To install IPTV Player, follow the instructions below starting from full screen TV
Screen Position
Due to all televisions being slightly different, some will display this image without issue, others may show the TV around the edges when in a full screen menu. If you feel you need to change the position of your screen to fit your tv better, complete the following steps:
Menu -> Setup -> Usage & GUI -> Extended GUI -> OSD Position
1. Move down and highlight "Move Left/Right" then by pressing the right arrow button enough time, you will see a red border appear from the left. Make this just visible on your screen (on the left) and then press the left arrow key until it moves just off the screen again on the left.
2. Now move down to "Width" and start pressing the left arrow button until the red border appears on the right. Just as it appears, press the right button a couple of times to make it disappear again .
3. Move Down to "Move Up/Down" and start press the right arrow until the red border appears at the top of the screen. Again, just as it appears, press the left button a couple of times to make it disappear
4. Move down to "Height" and start pressing the left arrow button until the red border appears at the bottom of the screen. Guess what.... just as it appears, press the right arrow key to make it disappear.
So to recap, once by one you have moved the red border for left, right, top and bottom on to the screen before moving them just out of view.
Once you have done the above steps, press the Green button (Save) and then the Exit button 4 times to return to the TV.
Alternate settings for your TV region
If you find that your ITV channel is not your local region, this is due to your local region not being available in HD. Where I live there is no HD for ITV South East and AutoBouquets selects ITV South. This actually does not affect me as all the news and local programs are the same for both regions so it makes no difference.
As mine doesn't make much difference I have left it set to "Channel Swap". With this set like this, you will also find that BBC1 HD goes off while your local news is being shown. To resolve this, find the channel number for BBC your region using the instructions below:
----- :look here: ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Credits & Acknowledgments
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
WooshBuild v3.00 is here
WooshBuild v3.00 is here
WooshBuild v3.00 is here
WooshBuild v3.00 is here
Please goto http://www.techkings.org/zgemma-sta...-transfer-plugin-basebuild-openatv-5-1-a.html
V3.00 uses online flashing from now and the future.
Existing users, move to v3.00 without losing your line or settings
New users - A simple USB Cam Importer plugin is included
Please goto http://www.techkings.org/zgemma-sta...-transfer-plugin-basebuild-openatv-5-1-a.html
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
WooshBuild v2.50 H2S
A new build, A better build
OpenATV 5.1 Base - This image works on the Zgemma H2S model
H2H support for his image has ended. It is not advised to use this image with the H2H
Zgemma 2S thread is here
WooshBuild v3.00 is here
WooshBuild v3.00 is here
WooshBuild v3.00 is here
Please goto http://www.techkings.org/zgemma-sta...-transfer-plugin-basebuild-openatv-5-1-a.html
V3.00 uses online flashing from now and the future.
Existing users, move to v3.00 without losing your line or settings
New users - A simple USB Cam Importer plugin is included
Please goto http://www.techkings.org/zgemma-sta...-transfer-plugin-basebuild-openatv-5-1-a.html
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
WooshBuild v2.50 H2S
A new build, A better build
OpenATV 5.1 Base - This image works on the Zgemma H2S model
H2H support for his image has ended. It is not advised to use this image with the H2H
Zgemma 2S thread is here
WooshBuild v2.50 includes bits that were missing from v1. Common questions, setup issues and features have been addressed, added or simplified. I have done as much pre-configuration as I can.
*H2H users must use the alternate Bouquet Maker. Instruction 3.1 cover this.
Again, instructions and screen shots for the beginners, I have tried to give a little bit of information about what is going on to try and start you on your way with these great boxes. At the bottom of this huge post is information on changing screen position, changing your ITV region, installing IPTV Player.
Click Here to: Download WooshBuild v2.50 H2S From TechKings Download Area
:no no: DO NOT use this thread to get your first post count - That is what the introduce yourself thread is for: New Member - Please introduce yourself here. :no no:
I have removed support for the H2H using this image, if you choose to use this image on your H2H you do so without support via this thread. It has been brought to my attention that once AutoBouquets E2 has been installed and run, ABM does not like to play causing issues and your box will crash when running a scan on the H2H.
This image is for those who want a sky+ box equivalent with easy setup and a happy misses in no time.
No FTP program required - Included in the zip file is an easy to use Line Transfer folder.
What's New - Minor changes
- Changed the channel scan to only show viewable FTA HD channels - No more HD channels in Sports unless FTA
- Setup the panic button to take you back to BBC1 and delete History Zap when you press the 0 button. This is instant
- Included blank cccam.cfg and newcamd.list files
- Added the build version number to the about screen: Menu -> Information -> About
- In this build
- New WooshBuild v2 Boot Logo
- OpenATV 5.1 Fully updated (at time or release)
- Slyk HD v3 complete with Sky EPG Tabs - Kiddac
- Sky Channel numbers on the EPG
- Picons (Program icons / Provider icons / Channel logos)
- AutoBouquests e2 (28.8e - Pre-scanned to get you up an running quickly)
- Random Audio Description turned off for all channels
- HDMI CEC configured. Put your TV in standby at the same time as your box (TV dependent)
- CrossEPG 0.6.2 - Locked so over the air updates will not replace with a newer version
- CrossEPG Slyk v3 Skin applied - Kiddac
- mgcamd_1.38r1
- CCcam 2.3.0
- CacheFulsh - pre-configured and in silent mode
- IPTV Player Ready - Simple install 2 minutes
- Pre-configured for use with an 8gb usb drive although as large as possible is better.
- Image flashes automatically as long as it remains inserted into the USB port. - So don't forget to remove it after flashing
- AutoBouquetsMaker installed and configured for H2H users. Please see instructions for use.
Following simple step by step instructions, you will have your box up and running in 10 minutes max (ok, maybe 20-30 if first time. I will be gentle with you)
Notes about this image
This entire post looks very scary to the newcomer with a new ZgemmaH2S box. Don't be put off. The guide below will walk you through each step needed to make you box work in about 20 minutes.
There are no instructions about backing up a previously installed line. If your box came pre-installed with a line (able to view Sky channels instantly) , please make sure you have a copy of your details.
If you don't please, read Kiddac's setup guide on page 6 as this covers backing up your pre-installed line. I will not be held responsible for you losing your pre-installed line and Sky channels.
What is required
Ideally two USB drives / Sticks / Flash Drives / USB HDD - Whatever you want or call them. A small USB stick is all that is required to Flash your box using this image. A larger device is advised 16GB bare minimum for recording / pause and rewind.
Connect your box
Satellite cables - top left, bottom right as marked below, the power lead, hdmi lead and network cable.
Feel free to turn it on, have a look around press a few buttons. Whatever you do at the moment will get removed when you flash the box using any image. When you have finished playing, I mean learning, turn off the box using the power button at the back.
How to flash with this image
IMPORTANT: Remove any usb devices or sd cards you may have inserted into you box before moving on. Failure to do so will result in your box NOT FLASHING
1. Make a folder on your desktop and extract all the contents of the zip file into your desktop folder.
2. Format a spare USB stick using the Fat32 file system - ideally this USB stick can be kept safe in a drawer should you need to re-flash your box at anytime.
3. Copy the zgemma folder and it's entire contents to the USB stick
4. With your box turned off, put the USB stick into the zgemmaH2S box using the front USB port (the one behind the flap)
5. Turn on the Box and wait for the letters FLSH to appear on the front screen. It will then change to boot after a minute or two. Once booted remove the USB stick from the front of box an keep in a safe place
6. You box is now flashed and running the latest version of WooshBuild and BBC1 HD will show full screen.
7. Once BBC1 HD is showing, switch off the box at the back and then remove the usb device from the front of the box.
* Anything you do between now could change the setup instructions below. It is your box, play as much as you want, do what you want, but these instructions work in a set order.
What do I do now
1. Initialise your USB device
Insert the USB / HDD that you are going to use for recording, pause and rewind into the rear USB port.
Menu -> setup -> System -> Storage Devices -> Initialisation -> OK button -> Red Button (Initialise) -> OK Button
Your USB device is now being initialised for use with the Zgemma box. This will be used for pause, rewind and the recording of programs, it is also used for the swap file, EPG data and picons. Time to complete this step varies depending on the size of the device. You will be returned to full screen TV when complete.
RESTART YOUR BOX! - do you think I want you to restart your box?
Press and hold the standby button then select Restart to restart the box.
This has just created a timeshift folder and also a movie folder on your USB device
Say hello to the new bootlogo
2. Create a Swap File
3. Change your TV region and rescan channels H2S Users
H2H users must use AutoBouquetsMaker - Instructions are 3.1
H2H Support on this image has been removed. H2H usrs continue without support if you want to. I no longer support H2H boxes - Sorry
3.1 Zgemma H2H Users only
I have sadly removed support for the H2H, please continue as a H2H user at your own risk as no support via this thread. Sorry
H2H box users must follow these instructions for a successful channel scan.
Both H2S and H2H users are to continue from here
4. Import your Program Guide (EPG)
If your screen doesn't look like this, answer this question: Is the Entertainment tab selected? If it is and your sky channels have no program guide, go back and check the above steps. If the Entertainment tab is not selected, press the Next> button on your remote to select it.
Once your EPG is populated, press the Exit button
5. Setup Timeshift (Pause, Rewind) and recording
This image is setup for use with a minimum of an 8gb USD device. The larger the device the better, 32gb, 64gb work well. But bigger still gives you more room for recordings.
The recording settings should already be correct, feel free to go in and check the "Default movie location" It should read /media/hdd/movie. Dont forget to press the Green button (Save) when done
Exit right back to the TV
6. Transfer your Line for All channel access - Zgemma H2S & H2H ONLY
Important Note: It is never advised to blindly click on batch files (.bat) when you don't know what they will do. This batch file is safe but if you don't want to do it this way, please download a free ftp client such as Filezilla and then follow Kiddac's guide on how to transfer your line using FTP.
Looking in the folder you created on your desktop at the beginning of this guide, there is a folder called "Put your line on Box". This folder contains everything you need to automatically transfer your line onto the box to allow full channel access.
1. Place either the cccamd.cfg file or newcamd.list file that your provider sent you in to THIS folder. Overwrite any existing files if it asks.
------------------------------------------------------------------------------------------------------------------------------------
If you only received your line details in an email, this bit tells you which file to open and paste your line details into:
If the details you were sent look something like:
N: speed5411.server.org 18000 username pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
or
C: speed5411.server.org 18000 username pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
You need to open the CCcam.cfg file, paste your details in and then save the file
If the details you were sent look something ilke:
CWS_KEEPALIVE = 60
CWS = quickness.server.net 56845 username pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14 lan server1
You need to open the newcamd.list file, paste your details in and save the file.
------------------------------------------------------------------------------------------------------------------------------------
2. Double Click the Line_installer.bat file. This will FTP your details directly to the correct place.
UPDATE: At his point Windows may display a Windows Firewall window asking you to allow or deny access. You need to click the "Allow Access" button. This basically lets the Windows FTP program access to the network. Failing to Allow Access will result in no files being transferred to your box and you will have to manually transfer the files.
You will now see a black window looking at you. The final message tells you that if you don't see any errors, everything has worked and you can close the window. So go on, close the window if there were no errors. If there were errors, take a screen shot and post it in this help so we can help.
3. Now Complete the following steps:
3a. Select Channel Sky1 via your EPG and go full screen - Your screen will be blank
3b. Press the Menu button -> Info Panel -> SoftcamPanel
You will arrive at a screen with "Select Cam 1" Highlighted.
The type of file you were sent by your supplier determines what you do next.
If your file is a "newcamd.list"
Press the left arrow button to change "Select Cam 1" to read mgcamd_1.38r1
If your file is a "cccamd.list" or a "CCcam.cfg" file
Press the right arrow button to change "Select Cam 1" to read CCcam 2.3.0
Press Green button - You may get a Info Message appear on the screen for 5 seconds.
(If the black mini TV screen does not start to show Sky 1, go back and change "Select Cam 1" to the different option and press the green button again.
You should now be able to watch Sky channels.
Press the exit button 3 times to return to the TV.
8. Picons - optional but I think they are worth adding
Picons are the little channels logos you see on some screen shots and these instructions guide you through adding them to your EPG and info bars.
9. Software Update Check
Now everything is setup, you can check for any software which has been updated and safely install it as OpenATV 5.1 is safe to update over the air.
Menu -> Setup -> Software management -> Software Update
Once the list has been populated, press the Green Button to update.
Important note: You will always see that CrossEPG will be updated, this is because the version used in this image is locked so it cannot be updated as that later versions will not work with OpenATV 5.1
When complete, press the OK button and select Yes to reboot your box.
Congratulations, you now have a fully setup Zgemma H2S box will all channels with full pause, rewind and recording facility.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
More information and additional steps
HDMI CEC - Already setup on this image. Information only
HDMI CEC lets you control your TV using the zgemma remote. This all depends on your TV and also if it is enabled on your TV.
To setup HMCE CEC follow these simple steps:
IPTV Player
These little boxes do so much more than just sat TV including the ability to stream films, live TV channels and TV series straight from the internet. This build has IPTV Player downloaded and just needs a few more steps to get you streaming direct from the internet.
To install IPTV Player, follow the instructions below starting from full screen TV
Screen Position
Due to all televisions being slightly different, some will display this image without issue, others may show the TV around the edges when in a full screen menu. If you feel you need to change the position of your screen to fit your tv better, complete the following steps:
Menu -> Setup -> Usage & GUI -> Extended GUI -> OSD Position
1. Move down and highlight "Move Left/Right" then by pressing the right arrow button enough time, you will see a red border appear from the left. Make this just visible on your screen (on the left) and then press the left arrow key until it moves just off the screen again on the left.
2. Now move down to "Width" and start pressing the left arrow button until the red border appears on the right. Just as it appears, press the right button a couple of times to make it disappear again .
3. Move Down to "Move Up/Down" and start press the right arrow until the red border appears at the top of the screen. Again, just as it appears, press the left button a couple of times to make it disappear
4. Move down to "Height" and start pressing the left arrow button until the red border appears at the bottom of the screen. Guess what.... just as it appears, press the right arrow key to make it disappear.
So to recap, once by one you have moved the red border for left, right, top and bottom on to the screen before moving them just out of view.
Once you have done the above steps, press the Green button (Save) and then the Exit button 4 times to return to the TV.
Alternate settings for your TV region
If you find that your ITV channel is not your local region, this is due to your local region not being available in HD. Where I live there is no HD for ITV South East and AutoBouquets selects ITV South. This actually does not affect me as all the news and local programs are the same for both regions so it makes no difference.
As mine doesn't make much difference I have left it set to "Channel Swap". With this set like this, you will also find that BBC1 HD goes off while your local news is being shown. To resolve this, find the channel number for BBC your region using the instructions below:
----- :look here: ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Credits & Acknowledgments
- Kiddac for his untouchable Slyk 1 HD v3 Skin making moving from mainstream provider to Zgemma simple - so simple even your misses will agree.
- Kiddac for my awesome boot logo
- Kiddac for his guide when I first started out.
- Everyone who used WooshBuild v1, the feedback given is the reason for v2.
- My missus and kids for my constant remote pressing, rebooting and flashing of our box.
- Techkings for being here, So many people willing to help, to many to mention, but thanks
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Attachments
Last edited: