OK Guys,
FINAL UPDATE
*****************
Second Box came back was also exchanged for a New One.
Again Tuner A+B Set-Up was a little Trial and Error.
I did not bother with Tuner C+Terr2, as I don't use or need that one.!
This time I went straight into the
Tuner Config >
Config Mode - Simple
Mode _ Diseqc A/B/C/D
Port A - 28E
Port B - 19E
Port C - 13E
Port D - 0,8W
Set Voltage 22Khz etc.... - YES
Send Diseqc etc... - NO
Force Legacy etc.... - NO
SAVE and EXIT..!!
Then move to Advance and Check these Settings,
Configurations Mode - Advanced
Satellite - 28E (here is the first Sat Position on your Diseqc Switch mine is 28E) - important
LNB - 1 (here the assigned LNB on Switch , mine is 28E LNB 1) - important
Priority - Auto
LOF - Universal LNB
Voltage Mode - Polarization
Increased Voltage - NO
Tone Mode Band - Band
Diseqc Mode - 1.0
Tonburst - None
Diseqc Command - Port A (here the corresponding Diseqc Command, in my case A for LNB 1) - important
Sequence Repeat - NO
Force Legacy Signal stats - No
You then do this for ALL 4 Sats and the corresponding LNB's....!!!!!
Ports - A thru to D
SAVE and EXIT...!!
Last BUT not least, back to Simple Mode, Choose this Mode .....SAVE and EXIT..!
Then GO to Auto Scan choose which Tuner you want and Press Green for Scan...That it..!!!!!
Should like for me bring up around 5200 Channels for these 4 Sats depending obviously on your Sat Set-Up and Dish size.!
Hope this little Tutorial Helps others who run into this Tuner problem with the Zgemma H7S.
If this FAILS then return the BOX the Tuners or Disqec are Fooket..!!!!
I struggled with my first Box as well.
Only to find that Tuner A was defect and because of that the Diseqc was NOT working as it should.!!
But I dont like to give up and so for me 100% success.!
Many thanks to "willo" and "cactikid" for their persistant Help and Support, really Apprec.!!!
Great Guys Cheers.
AJP