What's new
By:

Amiko Mini HD Combo Tutorial

Please help ! I've switch my hd cable in the meniu from 1080/50 and now it's says mode not supported and this is the only think displayed on the TV and I don't know what to do. Thanks
 
try this :press V FORMAT wait a few secs,press again, few secs,press again and so on

---------- Post Merged at 05:13 PM ----------

meant to say 'press'
 
No .. it's seems no matter what firmware I try the new client config is password blocked. Any ideas how I can get rid of this. Is there a restore to factory default or anything like that?
 
amiko mini hd se tried test line in yesterday , worked , put new line showing scrambled tried other lines same thing green lights showing scrambled , FTA working HELP
 
mine showing server 1 connect ok , working still getting scrambled channels (amiko mini hd se ) had it working yesterday ,
 
done all this -----1. Press menu + internet + net client config.
2. Select sever & press yellow to edit. Enter your details ie.
3. SERVER NAME: I add the name of server according to my subscription
SERVICE PORT: I add one of the ports you provided
USERNAME: I add my username account
CODE: I add my password
DES KEY: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Active sever Ok
Emm Enable Ok
Emulator Newcamd
4. Click activate + store + exit server 1 connected working still scrambles know the line from server ok
 
Jim1088 said:
done all this -----1. Press menu + internet + net client config.
2. Select sever & press yellow to edit. Enter your details ie.
3. SERVER NAME: I add the name of server according to my subscription
SERVICE PORT: I add one of the ports you provided
USERNAME: I add my username account
CODE: I add my password
DES KEY: 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Active sever Ok
Emm Enable Ok
Emulator Newcamd
4. Click activate + store + exit server 1 connected working still scrambles know the line from server ok
Click to expand...

Is it deffo newcamd? It could be mgcamd?
 
amiko hd se showing server 1 connect -working , 2 green lights on in under newcam but channels are scrambled , FTA ok HELP inte
 
Hi, does anyone know of a reliable server for VM cable in Plymouth please, as I've been informed I need to purchase one for 12mths to get my amiko hd mini combo box up and running? If anyone can help please PM me with contact details many thanks....
 
Daft question I know. But do I need a mains adapter for the ac power lead? I can't even get it to turn on. Thought it might have been powered through hdmi as nothing is said in the manual
 
Ha I just couldn't believe it wasn't supplied. I've got it all set up now, just need to get a line which I'm in the process of doing.
 
Hi all ive just done a software update now my menu didnt have a password on it and i updated through internet on box now its put a password to get into the menu system i tried all the usual like 0000 etc but wont accept it any ideas please
 
Hi Guys

Bought a programming cable that doesn't seem to work, so have cut the rca cable that came with the box and looking to solder it on to the rs232 fitting.

The RCA cable has 6 wires in 3 insulated cables red/Black, yellow/Black and white/Black....can anyone tell me what wire goes to which pin?

Thanks in advance
 
Oh god help

downloaded the latest firmware no code on this 1 thankgod had to buy new box

AMIKO_MiniHD_Combo_1.4.87_conax thats the firmware scanned all channels got them fine where in the world is place to add line nothing in conditional access nowhere to add in internet is it hidden or have they removed it some help would be great guys thanks
 
Quick update

Decided to cut open the sealed jack end and see what wire was going where and solder as required...now got a box flashing as I write this.

Be careful of eBay programming cables as the 3.5mm jack plug isn't long enough to make the contacts in the box!!

For anyone wanting to use the rca cable in the box and an rs232 fitting the procedure that worked for me was as follows:

1. Cut off the 3 phono plugs and bare the wires(Should now have Red/Black,Yellow/Black and White/Black)
2. Cut off the black wires next to the red and yellow wires(Not needed they all go into 1)
3.Solder the Yellow wire to pin 2
4.Solder the White wire to pin 3
5. Solder the Red and Black wires to pin 5
6.Follow the steps outlined on page 7 of this post.

Hopefully this helps some of you out!
 
You must log in or register to reply here.
Back
Top