What's new
By:

Wooshbuild Support Thread

Fergie73 said:
had to flash v7 again as it froze
can anyone advise on how to save/backup custom bouquets, so that when a new flash has been done i dont have to start from scratch rearranging bouquets (takes me about 30 minutes to get it the way i want)

excuse my noobness

any help appreciated
Click to expand...
Blue button, software manager, backup settings. Once reflashed same route and restore settings, your customised bouquets should re appear, mine did anyway.
Why don't you then go through green button, WB Config and then select reflash wooshbuild, that should give you the latest build which is 7.002
 
BEFORE POSTING:

Go to this thread and you will find over 40 FAQs. These are there and also at the beginning of this thread to answer questions which are asked every day.

DO NOT post unless your answer is there not. Please feel free to put one answer with another one to get a new answer which sorts your issue.

http://www.techkings.org/threads/wooshbuild-v7.133480/#post-823863

For some reason people have become very lazy and are not willing to help themselves before posting. I can become very lazy too.
 
Last edited:
good evening, I am trying to flash my box using the latest wooshbuild, I have gone onto the following link http://www.techkings.org/threads/my-h2-h-set-up-thread-using-wooshbuild.127252/ however when I insert the usb and turn the box on it wont flash, I have also pressed the button at the front but that also didn't work, I have downloaded to the correct make of box and also the correct link from the this thread, can anyone help please
I have tried it in the front and back of the box. I have a H5.2TC
 
Marko121 said:
Hi folks.

My TB sport extra bouquet has gone missing since upgrading to v7.
Has anyone else had this and can it be resolved?
Cheers
Click to expand...

Do these channels do anything anymore? I removed them - oops.

To get them back (which will restore all removed bouquets) - from full screen TV:

Green button -> Auto bouquet e2 -> Menu button -> Make all default bouquets - set this to yes. -> Green button -> Green button.
This will start a scan.
Once done, set Make all default bouquets back to No.

You should now have any bouquets I have removed back.
 
Adam Sanderson said:
Did you get sorted I’m having the same problems
Click to expand...
Im having same issues,however wooshman said in a post many people using the build with no such issues. Just wandering if its the way wooshbuild 7.02 was loaded. Example i loaded the build on to a freinds h2h with a usb stick and so did another friend. Who is having the same prob. I wonder if i had done an online flash fron the wb plugin weather it would have made a difference. May be worth trying this if not done already to see if channels will clear before we go back to wb6
 
I'm quite new to.this I have looked for ABM to download from plugins but can't find it or the right one for virgin etc. Sorry
 
Zgemma star h2 I can't set it up with out the ABM as the preloaded is for sky I believe thank you for your time or if it is where about a in plugins is the one I require
 
gibbo1471 said:
Zgemma star h2 I can't set it up with out the ABM as the preloaded is for sky I believe thank you for your time or if it is where about a in plugins is the one I require
Click to expand...
ABM is found in the systemplugins section of plugins.

Remove ABE2 and restart the box, then install ABM and configure for VM.
 
Hi wooshbuild managed to do that one more thing before is an the virgin channels in there are already channels on there from the abe2 program I wanted to delete all the bouquets before scanning new ones in I went into ABM but does not delete them any ideas as them will stay on once scanned virgin in cheers for your patience
 
Pedrostan said:
Hi all.
I'm new to Zgemma but get the box working without problems with "google" support.

I'm running wooshbuild v7 on Zgemma H5.2TC, IPTV through Bouqute marker and EPG via EPG importer ( my provider source ). The box is connected to NAS drive where recording, timeshift and EPG are stored.

The problem:

When setting up "record series" the message pops up that no match was found and zero events was created, I've tried this with multiple setting but nothing works, it's almost like is doesn't see the Epg, epg search also doesn't work.

I tried simulation on the openwebif but no joy there as well.

Please help, it drives me crazy.

Best regards.
Click to expand...


Me again.

I have set up Solo 2 with WB7 but autotimer doesn't work either.

Please give me a clue, should I chase this issue or there is nothing that can be done?
 
You can't series record iptv like you can freesat. You have to setup manually

PS is wooshbuild on formuler F1 box atv, 6.1 about to order box

Thanks
 
gibbo1471 said:
Hi wooshbuild managed to do that one more thing before is an the virgin channels in there are already channels on there from the abe2 program I wanted to delete all the bouquets before scanning new ones in I went into ABM but does not delete them any ideas as them will stay on once scanned virgin in cheers for your patience
Click to expand...
Delete them manually, takes about 1 minute.

TV Button -> Highlight bouquet to remove -> Menu button -> press 8 and then OK

Do this for each bouquet you want to remove.
 
Pedrostan said:
Me again.

I have set up Solo 2 with WB7 but autotimer doesn't work either.

Please give me a clue, should I chase this issue or there is nothing that can be done?
Click to expand...
As getrom said, you can't always ways record IPTV. There is nothing wrong with series link / Auto timer though. Try it on a normal TV channel and not IPTV.
 
Will try later thank you wooshman it is a good build I deleted bouquets in ABM but don't delete the channels but could not find that option in abe2
 
gibbo1471 said:
Will try later thank you wooshman it is a good build I deleted bouquets in ABM but don't delete the channels but could not find that option in abe2
Click to expand...
No, there is no option in AB E2 to delete them. I might add an option in WB Config to delete all bouquets regardless of what they are. This would be handy for old IPTV tests too.
 
Is there an option on the VPN adder to run at startup or disable at startup so I can manually turn the VPN one as and when I need it?
 
You must log in or register to reply here.
Back
Top