Deltec 123
Member
thats what ill be doing later
Upgrading oscam version to ncam/icam query
- Thread starter cactikid
- Start date
Deltec 123
Member
atv works black hole works so ill get vix working
weimaraner95
TK Veteran
As it was discussed in your Vix thread Oscam can be sometimes difficult to get right, Ncam worked straight away .
Deltec 123
Member
i get there cant see why not
Deltec 123
Member
Deltec 123
Member
not for me done evet oscam there working every thing but no germany got board with vix nowno more iv tried every oscam no s/g black hole yes atv yes im doing nothing rong
Last edited:
weimaraner95
TK Veteran
Have a go with Ncam
that is not from vix or atv feeds
and even then old version but will work for most even on openatv 7.3 but secret feed still updates
Attachments
Last edited:
weimaraner95
TK Veteran
@Deltec 123
You can't give up, reflash a slot with it again , so you ain't got loads a versions installed, install levi45 and Ncam and vhannibal icam , copy your configs and test . If it still fails then at least you tried , go on .
You can't give up, reflash a slot with it again , so you ain't got loads a versions installed, install levi45 and Ncam and vhannibal icam , copy your configs and test . If it still fails then at least you tried , go on .
dsayers2014
VIP Member
Can anyone using vix confirm de works with oscam latest using these instructions? Upgrading oscam version to ncam/icam query
Feel free to suggest edits if you needed to do something different and/or provide example config files.
Feel free to suggest edits if you needed to do something different and/or provide example config files.
Deltec 123
Member
I’ll have a good latler
Deltec 123
Member
I not for me open black works open ATV works just oscam icam from other forum up it in away u go vix for me a no no no
kegnkiwi
TK Veteran
I installed the oscam emu from the vix downloads and it installed ok but it does not open sky de. It also messed with my ncam settings. In the live log of oscam it said no matching readers for sky de and did not find any keys. Trying ncam again things seemed to have got messed up. I installed ncam again and got it working. Just for reference i also checked stream relay in oscam was working and that the caids were correct.
Last edited:
weimaraner95
TK Veteran
Had ago , made a backup obviously.
Oscam latest used from downloads in Vix added my line and it doesn't open De , , FTP I er my configs from r11718 modified by samur and it opens.
I ain't got the brains to understand what goes on under the hud , just that it works
I can slightly understand why Deltec123 must be pulling his hair out if he has any.
But he doesn't help himself
As I had problems with Vix too,
Oscam latest used from downloads in Vix added my line and it doesn't open De , , FTP I er my configs from r11718 modified by samur and it opens.
I ain't got the brains to understand what goes on under the hud , just that it works
I can slightly understand why Deltec123 must be pulling his hair out if he has any.
But he doesn't help himself
As I had problems with Vix too,
Last edited:
but you normally need to copy or alter configs it was the same with openatv at one time had to enable stream relay in oscam.config
Not sure about vix but open atv for oscam / ncam
ETC
TUXBOX
CONFIG FILES
Config files server files dvbapi files user files
The dvbapi files will prioritise Ignore and map
All the main caids . Remember the caids you are
Trying to open must also be in your configuration files .This is also explaination off disablecrccws
Means
What are the disablecrccws= 1 and disablecrccws_only_for parameters for?
disablecrccws stands for "disable cw checksum test"
You can set the parameter: "disablecrccws = 0 or 1" or "disablecrccws_only_for = xxxxx:xxxxx" in the oscam.conf, then these values are set globally and affect all readers that you then entered in the oscam.server.
If you have also entered "disablecrccws" or "disablecrccws_only_for" in oscam.server, these values will be "overruled" by oscam.conf
If you do not make these settings in oscam.conf, you can also set them in oscam.server, in any reader. These settings then only affect the respective reader.
disablecrccws = 0 or 1 (0 keeps the checksum test on, 1 keeps it off)
disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000
turns off the checksum test for the CardID 098C and 09C4 and 098D. It remains on for all other CardIDs.
By the way, the checksum test must be switched off by the SKY CAIDs.
So either in oscam.conf --> disablecrccws = 1 (then applies to all CAIDs and all lines) or disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000 then applies globally to all SKY CAIDs and all lines
or but
in the OSCAM Server per line either disablecrccws = 1 (then applies to the respective line) or disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000
is then in the respective line for the Sky CAIDs
ETC
TUXBOX
CONFIG FILES
Config files server files dvbapi files user files
The dvbapi files will prioritise Ignore and map
All the main caids . Remember the caids you are
Trying to open must also be in your configuration files .This is also explaination off disablecrccws
Means
What are the disablecrccws= 1 and disablecrccws_only_for parameters for?
disablecrccws stands for "disable cw checksum test"
You can set the parameter: "disablecrccws = 0 or 1" or "disablecrccws_only_for = xxxxx:xxxxx" in the oscam.conf, then these values are set globally and affect all readers that you then entered in the oscam.server.
If you have also entered "disablecrccws" or "disablecrccws_only_for" in oscam.server, these values will be "overruled" by oscam.conf
If you do not make these settings in oscam.conf, you can also set them in oscam.server, in any reader. These settings then only affect the respective reader.
disablecrccws = 0 or 1 (0 keeps the checksum test on, 1 keeps it off)
disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000
turns off the checksum test for the CardID 098C and 09C4 and 098D. It remains on for all other CardIDs.
By the way, the checksum test must be switched off by the SKY CAIDs.
So either in oscam.conf --> disablecrccws = 1 (then applies to all CAIDs and all lines) or disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000 then applies globally to all SKY CAIDs and all lines
or but
in the OSCAM Server per line either disablecrccws = 1 (then applies to the respective line) or disablecrccws_only_for = 098C:000000;09C4:000000;098D:000000
is then in the respective line for the Sky CAIDs
None of those are present in default oscam or server config files if for example ocam trunk-version openatv even dvbapi is limited, but I think most just copy there own config files over.
But it would be better if entries were there by default then only server and username and password would be needed to sever.config.
But such discussion not allowed on openatv
I understand your principles. All made so simple
With all the latest versions .
moshibeth
TK Veteran
I do not get why Deltec 123 keeps reverting back to openvix when he has a working image on openatv clearing those channels.
kegnkiwi
TK Veteran
Maybe he does not actually change the image 👍
