Boag
Newbie
Did this 1.45 arm progress does anyone know?
VM CHANNELS FIX (23/4/2020) OSCAM ONLY!!
- Thread starter grog68
- Start date
R0BINH00D
Member
Did what progress buddy???
grog68
VIP Member
not that I've heard, why not just switch to oscam. its simple
Deepest Funk
Newbie
can you switch to oscam if you were using n lines or does your provider need to offer oscam?
grahamer67
TK Veteran
Is there not a way to convert your current mgcamd or cccam to oscam, I thought I had seen it on the forum before somewhere, not a hundred per cent sure though
sigmadelta
Newbie
Story so far:
(btw using dsayers h2h backup image, but also tried grog and wooshbuild.) Open Atv 6.4 and vix.
mgcamd... nogo
tried contacting provider... no reply
converted to oscam using converter app... nogo
used webif to tick boxes on oscam reader as advised in previous posts... nogo
changed from oscam to oscam emu... nogo
tried 4 other test lines... nogo
Also heard from various other test providers, saying they could fix the issue AFTER I signed up... yeah right..lol.
Any other suggestions would be gratefully explored.
(btw using dsayers h2h backup image, but also tried grog and wooshbuild.) Open Atv 6.4 and vix.
mgcamd... nogo
tried contacting provider... no reply
converted to oscam using converter app... nogo
used webif to tick boxes on oscam reader as advised in previous posts... nogo
changed from oscam to oscam emu... nogo
tried 4 other test lines... nogo
Also heard from various other test providers, saying they could fix the issue AFTER I signed up... yeah right..lol.
Any other suggestions would be gratefully explored.
Can you get bbc1 and ch4?
sigmadelta
Newbie
Yes I get basic fta channels
Right got woosh build openatv 6.2 downloaded oscam emu converted my line done the above still nothing, shows channel on oscam Web on laptop any help
grog68
VIP Member
has your provider said they have fixed oscam on their end?
So he said bud
He told me to use oscam to get working again
Hi, can anyone help me with some VM channels?
I'm using Openatv 6.4 with Grogbuild, OSCAM- EMU, OSCAM-STABLE, OSCAM- TRUNK, MGCAMD 1.45 ...all last version all configured with N line ,all have the same issues with few channels not working, (Discovery Science,Discovery Turbo,Discovery Channel +1,Animal Planet +1, Discovery Shed, Discovery Science +1,National Geographic HD/SD) even some FREE channels. I re-image my Zgemma h92h with OpenATV, Openvix... with Wooshbuild, Willobuild, Grogbuild,...etc.
Everything with the last version but nothing change, still few channel not working.
I have few test lines whit the same issue , the providers keep saying it's my builds faulty it's corrupt , All... can you belive?
Maybe it's right because i dont have a full files for configuration on ZGEMMA H9.2H for OSCAM and or MGCAMD.
For that reason I ask for help,,,please guys.
OSCAM.CONFIG
# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn-satlodge-team SVN r11507
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt
[global]
disablecrccws_only_for = 0E00:000000;0500:050F00;098C:000000;09C4:000000;098D:000000;0500:030B00;1811:003311;1819:00006D;1883:003311;1863:003342;1833:003311;1803:003343;1830:000000;1883:003311;1863:003343;091f:000000,092b:000000,0931:000000,0940:000000
logfile = /var/log/oscam.log
initial_debuglevel = 128
pidfile = /var/log/pid.log
disableuserfile = 0
usrfileflag = 1
netprio = 1
unlockparental = 1
nice = -1
maxlogsize = 200
preferlocalcards = 1
usrfile = /var/log/oscamusr.log
ecmfmt = c:p:s #l
[cache]
delay = 50
max_time = 8
[newcamd]
port = 12121@0D96:000004;12122@0624:000000
key = 0102030405060708091011121314
[cccam]
port = 12000
nodeid = 4736728B103213F0
version = 2.1.2
stealth = 1
[streamrelay]
stream_relay_enabled = 0
stream_emm_enabled = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 1
delayer = 60
ecminfo_type = 1
user = remy
read_sdt = 2
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox
I: 098C:000000:0093 # Ignore this caid sky one HD #
I: 098C:000000:0084 # Ignore this caid DAZN1 #
I: 098C:000000:007A # Ignore this caid DAZN2 #
#
P: 09C4:000000 1 #ALL Prio for 09c4 first up #
#
P: 09C4:000000:0093 # sky one HD #
P: 09C4:000000:0084 # DAZN1 #
P: 09C4:000000:007A # DAZN2 #
[webif]
httpport = 8888
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httppollrefresh = 30
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
httpemmsclean = 50
httpemmgclean = 50
http_status_log = 1
OSCAM.SERVER
# oscam.server generated automatically by Streamboard OSCAM 1.20_svn SVN r11578
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt
[reader]
label = cable_nline
protocol = newcamd
device = net address, port
key = 0102030405060708091011121314
user = username
password = password
disableserverfilter = 1
connectoninit = 1
caid = 1841
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
dropbadcws = 1
disablecrccws = 1
I'm using Openatv 6.4 with Grogbuild, OSCAM- EMU, OSCAM-STABLE, OSCAM- TRUNK, MGCAMD 1.45 ...all last version all configured with N line ,all have the same issues with few channels not working, (Discovery Science,Discovery Turbo,Discovery Channel +1,Animal Planet +1, Discovery Shed, Discovery Science +1,National Geographic HD/SD) even some FREE channels. I re-image my Zgemma h92h with OpenATV, Openvix... with Wooshbuild, Willobuild, Grogbuild,...etc.
Everything with the last version but nothing change, still few channel not working.
I have few test lines whit the same issue , the providers keep saying it's my builds faulty it's corrupt , All... can you belive?
Maybe it's right because i dont have a full files for configuration on ZGEMMA H9.2H for OSCAM and or MGCAMD.
For that reason I ask for help,,,please guys.
OSCAM.CONFIG
# oscam.conf generated automatically by Streamboard OSCAM 1.20_svn-satlodge-team SVN r11507
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt
[global]
disablecrccws_only_for = 0E00:000000;0500:050F00;098C:000000;09C4:000000;098D:000000;0500:030B00;1811:003311;1819:00006D;1883:003311;1863:003342;1833:003311;1803:003343;1830:000000;1883:003311;1863:003343;091f:000000,092b:000000,0931:000000,0940:000000
logfile = /var/log/oscam.log
initial_debuglevel = 128
pidfile = /var/log/pid.log
disableuserfile = 0
usrfileflag = 1
netprio = 1
unlockparental = 1
nice = -1
maxlogsize = 200
preferlocalcards = 1
usrfile = /var/log/oscamusr.log
ecmfmt = c:p:s #l
[cache]
delay = 50
max_time = 8
[newcamd]
port = 12121@0D96:000004;12122@0624:000000
key = 0102030405060708091011121314
[cccam]
port = 12000
nodeid = 4736728B103213F0
version = 2.1.2
stealth = 1
[streamrelay]
stream_relay_enabled = 0
stream_emm_enabled = 1
[dvbapi]
enabled = 1
au = 1
pmt_mode = 1
delayer = 60
ecminfo_type = 1
user = remy
read_sdt = 2
write_sdt_prov = 1
extended_cw_api = 1
boxtype = dreambox
I: 098C:000000:0093 # Ignore this caid sky one HD #
I: 098C:000000:0084 # Ignore this caid DAZN1 #
I: 098C:000000:007A # Ignore this caid DAZN2 #
#
P: 09C4:000000 1 #ALL Prio for 09c4 first up #
#
P: 09C4:000000:0093 # sky one HD #
P: 09C4:000000:0084 # DAZN1 #
P: 09C4:000000:007A # DAZN2 #
[webif]
httpport = 8888
httptpl = /etc/tuxbox/config/tpl/
httprefresh = 30
httppollrefresh = 30
httpshowuserinfo = 1
httpshowcacheexinfo = 1
httpshowecminfo = 1
httpshowloadinfo = 1
httpallowed = 192.168.0.0-255.255.255.255,127.0.0.1
httpemmsclean = 50
httpemmgclean = 50
http_status_log = 1
OSCAM.SERVER
# oscam.server generated automatically by Streamboard OSCAM 1.20_svn SVN r11578
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt
[reader]
label = cable_nline
protocol = newcamd
device = net address, port
key = 0102030405060708091011121314
user = username
password = password
disableserverfilter = 1
connectoninit = 1
caid = 1841
group = 1
emmcache = 1,3,2,0
blockemm-unknown = 1
dropbadcws = 1
disablecrccws = 1
Last edited:
grog68
VIP Member
Has your provider confirmed they have fixed the issue on their end?
Note, the only channels that clear on cable without a line are 1 to 5 sd. So the 'Free' channels you listed above are not free to view on cable.
Yes, him told me everything works fine. I dont know what I can do any more!
delboy1234
Newbie
Are you using oscam on a box just for viewing VM? If you are your config is quite a mess. A lot of the stuff doesn’t need to be there and you need to add the recent changes.
I would suggest downloading the latest oscam from the feeds and using the default config that comes bundled and starting from there.