What's new
By:

VM CHANNELS FIX (23/4/2020) OSCAM ONLY!!

ok for those stuck with converting mgcamd to oscam try this:

Putty to your box, or use the terminal in openwebif and once logged in type the command:

Code: 
cat /usr/keys/newcamd.list

This will display your mgcamd line, it should look something like:

Code: 
CWS = SERVER PORT USERNAME PASSWORD  01 02 03 04 05 06 07 08 09 10 11 12 13 14

Obviously the SERVER,PORT,USERNAME,PASSWORD in the above would be replaced with the details of your line.

Now type the command below, but replace SERVER,PORT,USERNAME,PASSWORD with the relevant info from your line above.

Code: 
wget -O - https://www.dropbox.com/s/ovklttgjt9h3odg/oscam.server\?dl=1|sed -e 's*A*SERVER*' -e 's*B*PORT*' -e 's*C*USERNAME*' -e 's*D*PASSWORD*' > /etc/tuxbox/config/oscam-emu/oscam.server

this will put your oscam.server file into the oscam-emu folder, if you are using a different version of oscam then change the path of the oscam.server file accordingly.
 
grog68 said:
ok for those stuck with converting mgcamd to oscam try this:

Putty to your box, or use the terminal in openwebif and once logged in type the command:

Code: 
cat /usr/keys/newcamd.list

This will display your mgcamd line, it should look something like:

Code: 
CWS = SERVER PORT USERNAME PASSWORD  01 02 03 04 05 06 07 08 09 10 11 12 13 14

Obviously the SERVER,PORT,USERNAME,PASSWORD in the above would be replaced with the details of your line.

Now type the command below, but replace SERVER,PORT,USERNAME,PASSWORD with the relevant info from your line above.

Code: 
wget -O - https://www.dropbox.com/s/ovklttgjt9h3odg/oscam.server\?dl=1|sed -e 's*A*SERVER*' -e 's*B*PORT*' -e 's*C*USERNAME*' -e 's*D*PASSWORD*' > /etc/tuxbox/config/oscam-emu/oscam.server

this will put your oscam.server file into the oscam-emu folder, if you are using a different version of oscam then change the path of the oscam.server file accordingly.
Click to expand...
Right think line converted to oscam file saved to oscam server were do I transfer line to
 
grog68 said:
if you use the command I gave then it should now be where it needs to be, just set your softcam to oscam-emu and restart
Click to expand...
blank bud here what it says
  • 2020/05/20 21:31:03 00000000 s (main) System name = Linux
  • 2020/05/20 21:31:03 00000000 s (main) Host name = zgemmah2h
  • 2020/05/20 21:31:03 00000000 s (main) Release = 4.10.12
  • 2020/05/20 21:31:03 00000000 s (main) Version = #1 SMP Sat Dec 28 07:18:37 UTC 2019
  • 2020/05/20 21:31:03 00000000 s (main) Machine = mips
  • 2020/05/20 21:31:03 00000000 s (main) Stb model = h3
  • 2020/05/20 21:31:03 00000000 s (main) Stb vumodel = vuultimo
  • 2020/05/20 21:31:03 00000000 s (main) Stb boxtype = h3
  • 2020/05/20 21:31:03 00000000 s (main) creating pidfile /var/tmp/oscam-emu.pid with pid 1206
  • 2020/05/20 21:31:03 00000000 s (emu) OSCam-Emu version 798
  • 2020/05/20 21:31:03 00000000 s (config) userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
  • 2020/05/20 21:31:03 00000000 s (main) signal handling initialized
  • 2020/05/20 21:31:03 00000000 s (net) cccam: initialized (fd=4, port=12000)
  • 2020/05/20 21:31:03 00000000 s (reader) emulator [emu] creating thread for device emulator
  • 2020/05/20 21:31:03 00000000 s (main) waiting for local card init
  • 2020/05/20 21:31:03 43DE1B7A r (emu) Stream key delayer initialized
  • 2020/05/20 21:31:03 43DE1B7A r (emu) Stream relay server initialized
  • 2020/05/20 21:31:03 43DE1B7A r (reader) emulator [emu] Reader initialized (device=emulator, detect=cd, mhz=357, cardmhz=357)
  • 2020/05/20 21:31:03 00000000 (emu) INFO: FFDecsa parallel mode = 64
  • 2020/05/20 21:31:03 06E4A455 h (webif) webif: decompressed 172595 bytes back into 416816 bytes
  • 2020/05/20 21:31:03 06E4A455 h (webif) HTTP Server running. ip=:: port=83
  • 2020/05/20 21:31:04 43DE1B7A r (reader) emulator [emu] card detected
  • 2020/05/20 21:31:05 43DE1B7A r (reader) emulator [emu] found card system emu
  • 2020/05/20 21:31:05 43DE1B7A r (reader) emulator [emu] THIS WAS A SUCCESSFUL START ATTEMPT No 1 out of max allotted of 1
  • 2020/05/20 21:31:05 43DE1B7A r (emu) Reading key file: /etc/tuxbox/config/oscam-emu/SoftCam.Key
  • 2020/05/20 21:31:05 43DE1B7A r (emu) Total keys in memory: W:0 V:6 N:0 I:11 F:0 G:0 P:296 T:60 A:0
  • 2020/05/20 21:31:05 00000000 s (main) init for all local cards done
  • 2020/05/20 21:31:05 00000000 s (emmcache) loading emmcache disabled since no reader is using it!
  • 2020/05/20 21:31:05 00000000 s (emmcache) loading emmstats disabled since no reader is using it!
  • 2020/05/20 21:31:05 271113A2 c (client) plain dvbapi-client granted (dvbapi, au=auto (1 reader))
  • 2020/05/20 21:31:05 271113A2 c (dvbapi) dvbapi channelcache loaded from /etc/tuxbox/config/oscam-emu/oscam.ccache
  • 2020/05/20 21:31:05 271113A2 c (dvbapi) Detected /dev/dvb/adapter0/demux0 Api: 0, userconfig boxtype: 0 maximum number of filters is 64 (oscam limit is 64)
  • 2020/05/20 21:31:05 271113A2 c (dvbapi) ERROR: ioctl(CA_GET_DESCR_INFO): Invalid argument
  • 2020/05/20 21:31:07 271113A2 c (dvbapi) Demuxer 0 ecmpid 0 CAID: 1850 ECM_PID: 19A7 PROVID: 000000
  • 2020/05/20 21:31:07 271113A2 c (dvbapi) Demuxer 0 ecmpid 1 CAID: 1841 ECM_PID: 13CB PROVID: 000000
  • 2020/05/20 21:31:07 271113A2 c (dvbapi) Demuxer 0 found 2 ECM pids and 5 STREAM pids in CA PMT
  • 2020/05/20 21:31:07 271113A2 c (dvbapi) Demuxer 0 no suitable readers found that can be used for decoding!
  • 2020/05/20 21:31:12 271113A2 c (dvbapi) Demuxer 0 no enabled matching ecmpids -> decoding is waiting for matching readers!
 
If he's given you a CWS line, mgcamd will open it if it's live.
If mgcamd1.45 won't open it, he's not fixed his server
Just paste it in newcamd.list and restart mgcamd
 
grog68 said:
ok for those stuck with converting mgcamd to oscam try this:

Putty to your box, or use the terminal in openwebif and once logged in type the command:

Code: 
cat /usr/keys/newcamd.list

This will display your mgcamd line, it should look something like:

Code: 
CWS = SERVER PORT USERNAME PASSWORD  01 02 03 04 05 06 07 08 09 10 11 12 13 14

Obviously the SERVER,PORT,USERNAME,PASSWORD in the above would be replaced with the details of your line.

Now type the command below, but replace SERVER,PORT,USERNAME,PASSWORD with the relevant info from your line above.

Code: 
wget -O - https://www.dropbox.com/s/ovklttgjt9h3odg/oscam.server\?dl=1|sed -e 's*A*SERVER*' -e 's*B*PORT*' -e 's*C*USERNAME*' -e 's*D*PASSWORD*' > /etc/tuxbox/config/oscam-emu/oscam.server

this will put your oscam.server file into the oscam-emu folder, if you are using a different version of oscam then change the path of the oscam.server file accordingly.
Click to expand...
This work on all enigma 2 builds grog ?? will post else where if its ok with you as a few of the lads on the vu+ forum are struggling
 
Last edited:
You must log in or register to reply here.
Back
Top