What's new

Zgemma H2H crashing on boot

bowster

Newbie
Hi. I now have an H2H. Went to download Wooshbuild infinity. It now boots to 49 percent then crashes and just keeps doing this. I have tried to reflash from USB but its doing nothing.

Can anyone help please?
 
Hi. I now have an H2H. Went to download Wooshbuild infinity. It now boots to 49 percent then crashes and just keeps doing this. I have tried to reflash from USB but its doing nothing.

Can anyone help please?
Neither wooshbuild nor grogbuild will work on new openatv images.

Better to just install plain openatv 7.3 from nightly builds on openatv forum, then just setup your tuner for freeview and add any other bits and pieces you normally use
 
Try a small/different USB stick to flash the box.

If that does not work,
are you able to log in to your router or use angry IP scanner to find the IP address of the receiver?
are you able to use putty/filezilla?
 
Hi. Where can I find a code for putting into putty for a reflash of openatv? I thought I found one but i'm still having the same issue as before.

The usb didn't work
 
Try a small/different USB stick to flash the box.

If that does not work,
are you able to log in to your router or use angry IP scanner to find the IP address of the receiver?
are you able to use putty/filezilla?
Hi. Where can I find a code for putting into putty for a reflash of openatv? I thought I found one but i'm still having the same issue as before.

The usb didn't work
 
Try a small/different USB stick to flash the box.

If that does not work,
are you able to log in to your router or use angry IP scanner to find the IP address of the receiver?
are you able to use putty/filezilla?


Have I completely broken my box? It is now stuck on boot and won't connect via Putty
 
Hi. Where can I find a code for putting into putty for a reflash of openatv? I thought I found one but i'm still having the same issue as before.

The usb didn't work
What size and make usb did you buy?
If you're still using an old one or one that you found in a drawer, it won't work.
 
What size and make usb did you buy?
If you're still using an old one or one that you found in a drawer, it won't work.
thats were some confusion comes from years back all that would be mentioned was problems with flashing zgemmas some wo.uld say sandisk others would say smaller usb
 
thats were some confusion comes from years back all that would be mentioned was problems with flashing zgemmas some wo.uld say sandisk others would say smaller usb
I've tried dozens of generic usb and most wouldn't flash my E2 boxes, they worked ok in the laptops etc. Sandisk of any size will flash first time, not noticed any difference between 4gb and 64gb, even on H2h so never really got that size thing
 
thats were some confusion comes from years back all that would be mentioned was problems with flashing zgemmas some wo.uld say sandisk others would say smaller usb
Sandisk are bullet proof only ever had one fail and that was beyond repair. Flashed thousands of those boxes back when c/s was flat out.
 
Listen now pal the guy has been told exactly what to order (16 GB sandisk) usb new it will work every time. Before this Iptv and free for all people would take advise on these boxes.
Hi mate I know about zgemma boxes I used to flash them myself for customers it’s a easy fix, I have seen & read the posts above just now sorry for the confusion buddy.
 
Back
Top