I now have 1-5 Pabloescban, I had my cable in the wrong tuner :( in which files do I put my lines?
if it begins with N: or C: (not CWS) you can paste it into CCcam.cfg and use CCcam2.3.2
or you can put the details into an oscam.server file and use the oscam softcam
Is that in Usr/Keys or ect folder?
if using infinity, the CCam.cfg file will be in usr/keys folder
Oscam.server file will be in usr/keys/oscam_atv_emu folder
Oscam.server file will be in usr/keys/oscam_atv_emu folder
and where would a Converted CWS Line go?
in the bin, you need a newcam or Ccam line, ask your provider to convert it at his end, convering a CWS line to N very rarely works in oscam as they both use different port numbers
Other channels did not clear in usr/keys, but did in etc cccam.cfg after down loading the ARM CCcam IPK. Many thanks for your help Pablo, it is much appreciated, as is all advice and information gained from this site. As they say, every day is a school day :👍:
silverblack
Member
£120 now for the H7S has started selling them with official Openvix 
Last edited by a moderator:
Got my new box today, also with a missing screw. Notice the instructions for installing an internal HDD are pretty poor, I know it ain't rocket science, but I also notice installing one voids your warranty.
Been messing about with it and had whooshbuild installed, currently taking that off to go to a bare bones image.
Been messing about with it and had whooshbuild installed, currently taking that off to go to a bare bones image.
This is where I got my box from yesterday, but does installing a HDD void the warranty?
Anyhow, one of the options I was given was for it to be flashed with openvix, I choose atv as that is what most have been using on here. I contacted them this morning to ask about the openvix image, and they have advised to keep a look out on the website this weekend for its GA release.
Willo3092
VIP Member
Technically yes, but this applies to any receiver with an internal hdd, not just the H7.
I've contacted for support on several occasions and fitting my own hdd has never been an issue. They have an excellent support team too :👍:
Last edited by a moderator:
turoktr
Newbie
ET8500 is also good device.I still use ET9000 has a smooth picture quality.
I've a doubt about multiboot function!Currently openvix is active.
At Standby and restart>Multiboot there are "slot 1 openatv 6.2" and "slot 2 openvix 5.2"
That means two more slots are empty and install new images.
If I install 2 new images to slot 3 and slot 4 and let's suppose one of these images does not support multiboot; how can I choose to start up with other images? If device would ask me to choose which slot or image to boot at early stage on booting, there would be no problem.
But commanding restart is booting device with the last image unfortunately.
Is any comment for this issue please?
Last edited by a moderator:
Similar threads
