1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

dsayers2014 openatv image for the H.2H with one set of bouquets 2017-03-05

The only combined one set of bouquets openatv image

  1. dsayers2014
    Openatv 5.3 for the zgemma H2.H with Kiddacs VSkin HD with slyk1hd set it as your skin
    And mgcamd1.38 and cccam2.30 with setup guide


    Kiddacs vskin v1.011
    Kiddacs slyk1hd v5.200
    auto bouquets setup
    Auto epg update set
    Cross epg setup to hdd
    Includes mgcamd, cccam, openwebif, picture player, Iptv Player, epg refresh and cachflush
    the latest sat_282_sky_uk_CustomMix.xml is downloaded every week via a crontimer
    Script to change the pics in the V-Skin menus daily
    script to download the providers files weekly
    The providers are set to download weekly via a crontimer

    OK. Basically u need a usb or hard drive that can be wiped and devoted to the box.
    That will store program guide and recordings and timeshift to rewind TV etc.
    4gb is minimum I'd recommend. But more is better.
    Once image is flashed and u edit ur newcamd.list file in usr/keys or CCcam.cfg in usr/keys with FileZilla.
    Get the permanent USB/hdd onto a PC and quick format it.

    Flashing the box
    flash with the zgemma folder only on a formatted usb stick turn of box using back power button insert usb in back and switch on using back button then box should change from usb to flash.

    ZGEMMA DISHCABLE'S SETTUP
    Plug one dish cable into tuner A(sat). And the second cable into B(vm).
    You will need to blug kenable F Type Screw Connector Socket to RF Coax Aerial Male Adapter to plug into tuner b

    Then
    Menu, setup, service searching, Tuner configuration,
    Select Tuner B: and input your network id
    tuner configuration.jpg
    Check here for a list of network ids http://www.techkings.org/general-cable-tv/65862-cable-netids.html

    Please note you will need both sky and cables tuners and subs for this image to
    Work



    added info: you will also need a network connection for scanning channels and to unscramble the channels
    either use a lan cable, home plugs or wifi adapter. lan cable or home plugs is recommended for a more stable connection
    please do not post in this thread regarding wifi adapters as i dont use them so i cannot offer support

    USB/ HARD DRIVE SETUP
    Box off.
    Usb in rear.
    Box on.
    Blue Button
    Harddisk/Harddisk Setup press right
    initialisation.jpg
    Initialization choose your device and press red to initialise

    If you get "ERROR
    initializing storage device error: umount: cant unmount media/hdd: device or resource busy" whilst trying to initialise the storage device press menu, Info panel, plugins, SwapManager press red to deactivate then retry to initialise the storage device.

    Press

    then convert ext3 to 4 choose your device and press red to convert ext3 to 4


    Creating Swapfile
    I dont think the newer models need a swapfile but if you want to
    MENU, Infopanel, Plugins, SwapManager, GREEN, Select your drive, 256Mb, takes a couple of mins to create, once created choose RED to activate and YELLOW to autostart

    restart box not GUI

    Recording and Timeshift settings

    Menu
    Setup
    System
    Recording and Timshift settings
    Recording settings
    Default movie location should be media/hdd/movie
    recording settings.jpg

    (If u are using a large enough usb/HDD u may want to go to
    Menu
    Setup
    System
    Rexording and timshift settings
    Timeshift settings
    Ensure timeshift location is showing: media/hdd/movie/timesshift
    Autorecord is showing media/hdd/movie
    if you want enable Autorecord
    Autostart ts after 30secs or whatever.
    As it is u must press pause to start timeshift)

    If you find that the screen is to large/small/off to side:
    Menu
    Setup
    Usage and GUI
    Extended GUI
    OSD Position
    U can change about here. Including transparency of windows.


    Before running abm we need to download the custommix file

    red button
    Plugins
    Job manager
    scripts.jpg
    choose updatecustom.sh you will be asked if you run the script choose yes
    it will say installed sat_282_sky_uk_CustomMix.xml execution finished
    exacution finished.jpg
    exit back to tv

    now we can run abm

    TO SETUP ABM

    Menu
    Setup
    Service searching
    Autobouquets maker
    Providers. Wait
    Sky UK: area. Change from northwest Yorkshire HD to your area HD not sd or custom we need HD to swap with cable by pressing right or left.
    You may want to go down and change sky uk channel swap to no if you don’t have bbc1hd and ITV hd versions in your are in.

    Then virgin(uk): area change 41064 York(ff Leeds) to your net id
    abm vm.jpg
    No need to generate other bouquets
    Green to save.
    Start scan. Wait.
    Exit all
    Hold power Restart


    TO SETUP EPG
    I have set-up crossepg for sat and epgrefresh for cable


    For crossepg (sat)
    Menu
    Setup
    Cross EPG
    Download now. Takes 5-10 mins. Will seem like its stuck on Loading Data. Wait.
    Happens automatically at 6.00 am anyway.
    Exit all
    crossepg.jpg
    Hold power again and restart.

    For epgrefresh(cable)
    Go to all channels bouquet select the vm previews channel and press the green button then epg refresh now
    this is setup to automatically run at 5.30 am.
    This is also set to shut down the box after automatic scan at 5am if you want to change this portal, epgrefresh show advance options yes
    Change shutdown after EPG refresh to no.


    incuded

    Kiddacs vskin v1.011
    Kiddacs slyk1hd v5.200
    kiddacs slyq v1.002
    chabs SkyQ
    auto bouquets setup
    Auto epg update set
    Cross epg setup to hdd
    Includes mgcamd, cccam, openwebif, picture player, Iptv Player, epg refresh and cachflush
    the latest sat_282_sky_uk_CustomMix.xml is downloaded every week via a crontimer
    The providers are set to download weekly via a crontimer


    To install picons if you want

    download snp picons


    Picons are the little channels logos you see on some screen shots and these instructions guide you through adding them to your EPG and info bars.


    First of all check that you have no previous picons installed and if so remove them


    From full screen TV:
    Press the Portal button -> Red button (remove plugins) -> Highlight +Picons and press OK
    Now any picon lists you see in that section need removing. Highlight, press ok and select yes.
    Once you have removed any existing picon sets exit right back to full screen TV.


    From full screen TV:
    Press the Portal button -> Green button to download plugins -> Highlight +picons -> Press the OK button


    Scroll right down the list and and choose 100x60 snp light on transparent picons Press OK, Press OK again. Highlight and Select your external USB device


    This takes a little while to download and extract due to there being 7000+ picons and may appear to have crashed. How long it takes will also depend on the speed of your USB device. While you are waiting be patient wait and wait some more.
    When you are returned to the menu, Press the Exit button twice to return to full screen TV


    Now press your EPG button and in the top left hand corner your should see the channel logo. It will also show up when you press the OK button from full screen TV



    Changing the resolution of the box
    This backup was made using the resolution for 720 tvs
    To change this menu. setup, video, basic settings
    go to mode and press right to change from 720 to what your tv supports



    Skins
    slyk1hd included with epg tabs {No Mods} just set it as your skin – menu, setup, usage and gui skin setup


    Kiddacs slyq included just set as your skin – menu, setup, usage and gui skin setup


    Chabs SkyQ skin is downloadble via download plugins

    Then set it as your skin menu, setup, usage and gui, skin setup choose skyq


    Portal green button to download plugins choose skins scroll down to skyq skin by Chababu

    Extra plugins
    Grogs movie organisor plugin available via download plugins-extentions



    Changing the resolution of the box
    This backup was made using the resolution for 720 tvs
    To change this menu. setup, video, basic settings
    go to mode and press right to change from 720 to what your tv supports





    Idiots Guide for adding your line with Filezilla

    On your Box Menu > Info> Network > Get your box IP address
    Open up FileZilla Host (top left ) Type in IP address Username root Leave others blank Press Quick connect
    Box should then connect to computer Left side computer, Right hand box

    For Nlines
    On right hand side locate usr Double click it Then Keys Double click It You should now see 3 files CCcam.cfg, Mg_cfg and Newcamd.list On Newcamd list Left click/right click Then click View/Edit (It may ask you what program you wish to view the file choose Notepad) You will see 2 samples of what your line should look like either edit your line details or Delete up to CWS = (space either side of =)
    Copy and past your line Less the N: in its place
    Disconnect from FileZilla By Clicking the X just under bookmarks top of page
    Press blue button on remote control >.Softcam press right Select soft cam panel Mgcamd 1.38 should show as default press green to restart

    For Clines
    Again usr/keys on box Your line goes Complete with the C in CCcam.cfg and start in Softcam panel press right to change cam
    Hope it helps

    This also has slyk1hd v5.003 to change it menu, setup, useage and GUI, Skin Setup and select slyk1hd

    For support on the V Skin HD check or start a new thread here http://www.techkings.org/general-skin-support/

    For support on slyk1 hd skin have a look here or start a new thread here http://www.techkings.org/general-skin-support/

    Added info
    This image is using epgselection.py for epg tabs

    below is a list of the buttons on epg

    Press previous and next to scroll epg tabs
    ch up and down to scroll pages in epg

    pressing tv while in epg brings up a bouquet list so you don't need to exit and press epg for the list of bouquets

    Screen shots and support is available here http://www.techkings.org/threads/ds...for-the-h-2h-with-one-set-of-bouquets.101096/
    mak11988 and cottonmouth like this.

Recent Reviews

  1. mesh1011
    mesh1011
    5/5,
    Version: 2017-03-05
    excellent
  2. singh48
    singh48
    5/5,
    Version: 2017-03-05
    brilliant, worked straight away. well done mate for creating this easy guide.thanks
  3. Warbo
    Warbo
    5/5,
    Version: 2017-03-05
    Brill image with great east to follow setup instructions. No problems at all, highly recommend others give it a try.
  4. HiTeck
    HiTeck
    5/5,
    Version: 2017-03-05
    Thank you.