Hi folks I have noticed that people are having recording/viewing issues ie. being unable to record premium whilst watching premium etc.I had the same problem and found that this setup works with Openatv 4.2 and a cline but may work with other images.
Start by going into:
Menu
Setup
Service searching
Into Tuner configuration and choose tuner A
Configuration mode Advanced,
Satellite 28.2E Eutelsat 28A & Astra 2A/2E/2F (select using > key)
Set LNB to LNB1.
Press Green to save.
Choose Tuner B and repeat steps.
Exit out to Setup.
Go into System,Extended System,Recording settings.
Default movie location set to, /media/hdd/movie/ then set Preferred tuner for recordings to auto press Green to save.
Exit out to Main menu.
Go into TSpanel and select Softcams
If you can only see CCcam 2.1.3 or earlier press Install (blue button)
From the list highlight CCcam 2.3.0 and press Install (blue button)
Once it has downloaded highlight it and press Start/Restart(green button)the indicator will turn from red to green to show it is running,exit out and reboot the box.
You should now be able to watch and record any channel you have access to.
Start by going into:
Menu
Setup
Service searching
Into Tuner configuration and choose tuner A
Configuration mode Advanced,
Satellite 28.2E Eutelsat 28A & Astra 2A/2E/2F (select using > key)
Set LNB to LNB1.
Press Green to save.
Choose Tuner B and repeat steps.
Exit out to Setup.
Go into System,Extended System,Recording settings.
Default movie location set to, /media/hdd/movie/ then set Preferred tuner for recordings to auto press Green to save.
Exit out to Main menu.
Go into TSpanel and select Softcams
If you can only see CCcam 2.1.3 or earlier press Install (blue button)
From the list highlight CCcam 2.3.0 and press Install (blue button)
Once it has downloaded highlight it and press Start/Restart(green button)the indicator will turn from red to green to show it is running,exit out and reboot the box.
You should now be able to watch and record any channel you have access to.
Last edited: