Zgemma h2h build advice

[maxrudd]

Box running 6.2 atv did have wooshbuild on but after atv update whoosh build gone. Question is which build is best / easy to put back on?

 

[bazcfc1]

Grog free range as it reflashes and installs the build for you go down to all builds grog free range is in there with a command for putty

 

[Graham19811981]

Need to initialise usb stick first

• Setup -> System -> Storage Device -> Initialisation -> YOUR USB DEVICE -> Red Button.
  Once the initialisation has completed, hold the power button on remote until a menu appears and select Restart Gui.
• Step 3 : Make sure the storage device is mounted correctly by pressing the RED button on the remote and selecting Plugins -> Mount ManagerYour storage device should be listed and should say Mount: /media/hdd.
  If it does just press the exit button until you exit the menus, if it doesn't press the Green button to Setup Mounts and using the Left/Right arrows on the remote change the mount until /media/hddis selected and press the Green button to save. Answer yes if prompted to restart the box.

Then once done you enter the command line and follow instructions! Keep note of all lines when you flash!


wget --no-check-certificate -O fla.sh http://flashmybox4.me && bash fla.sh

 

[maxrudd]

cheers all sorted few test lines needed now

 

[bazcfc1]

Anyone Recommend A Good Server For Cable - June 2019