What's new
By:

Wooshbuild Support Thread

Hi,

I have updated to v7and thank you Wooshman for a great build, all went OK but my H2s remote no longer turns the TV off. I have enabled HDMI CEC with all parameters set to yes but o no avail. This worked perfectly on v6.
Has anyone else had this problem resolved ?
If it is not possible to rectify this problem where can I get V6 basebuild from?
 
Last edited:
wooshman said:
How to change you screen position to make something fit your screen has been covered in the thread. Search "screen position" It isn't the skin which is wrong and doesn't need making anything, you need to change your screen. All skins for WooshBuild and Chabs' skins are available in the skin section of plugins, agains already posted, in fact today so won't be hard to find.

I will look at he channel numbers to see if they have been moved around.
Click to expand...

Thanks for the reply. I'll have a look for the post re screen adjustment when I get home tonight and also upload the $ky Q skin (althought I really like the freesat skin).

I have seen comments about picture freezing/stopping from other users (possible problems with cam line). I don't know if this is related or a coincidence but all seemed fine before changing over, but notice my documentary channels were breaking up and not even clearing last night. Then coming back on all of a sudden.
 
Hi, some channels (BT Sport) were working fine. I updated to WB7 and my lines stopped working.
I've rolled back to my backup of WBv6 and everything is a normal but my line (actually got 2 lines on my newlist.list) is still not working?
Anyone any ideas?
Thanks
 
wooshman said:
I will have a look at cams today but with the number of users running wb7, it seems to point to individual cases. I don't know if this is server cam server related or what. As I have said before, I cannot get m main line to run as oscam for the life of me, but another server kicks in instantly.
Click to expand...
Yes i can confirm something going on. Someone mentioned certain channels and yes im the same. I noticed ecm ms times seem to have increased. It might be worth seeing if we can check pre w7 and post times. I expect its poor reseller lines and borderline glitch ecm times are surfacing because of this undiscovered change.
My box is hardwired so has something changed in the network driver or the software routing of the vpn plug in even when its not activated?.... who knows.

Sent from my GT-I9505 using Tapatalk
 
When the VPN isn't running it isn't running but the service is. You can remove it via the network menu and see if it makes a difference.

The vpn plugin doesn't do anything except copy files, no more no less.
 
Hi,

Sorry if this is a silly question. I am using WooshBuild 7 with Chabs Sly Q Skin on Zgemma H2s.

Do I need to reflash to update to WooshBuild 7.002?

I was trying to update the build using WooshBuild plugin and the only option I get is to reflash.

Thanks in advance
 
Sean2013 said:
Hi,

Sorry if this is a silly question. I am using WooshBuild 7 with Chabs Sly Q Skin on Zgemma H2s.

Do I need to reflash to update to WooshBuild 7.002?

I was trying to update the build using WooshBuild plugin and the only option I get is to reflash.

Thanks in advance
Click to expand...
If you want to do software updates without crashing your box you need to re-flash, as you have seen this can be done easily from WB Config. re-flashing to 7.002 is advised.
If you never do software updates 7.000 will work fine.

Blame openATV for the fast update as they broke 7.00 and I broke 7.001
 
Can I flash this without using usb stick in the back ?, I'm using a vusolo2 with internal hard drive for recordings, its full of data and dont want to use another usb stick or format my hdd
 
Jakeywinebottle said:
Can I flash this without using usb stick in the back ?, I'm using a vusolo2 with internal hard drive for recordings, its full of data and dont want to use another usb stick or format my hdd
Click to expand...
If you are not running WooshBuild already, flash the box with BaseBuild and it will ask you if it is OK to delete existing data. You just say no to it and it will continue.

Your hard drive is the equivalent of a USB device terminology wise. But you will still need to flash BaseBuild from a usb stick if you are not running WB already.

@makido is the one for this though as she is the Solo2 flasher.
 
I updated to brand new woosh I have 2 cccams on.Disabled auto bouquet maker as I have custom bouquets with my iptv sub and they all work absolutely brilliant.My only problem is crossepg comes up with an error.I don't mind as I use epg importer thank you very much wooshman and all concerned.
 
Hi,
Im running W7.002 and all is going well except no matter what i do it wont swap BBC1HD or ITVHD for the SD options, I have set WBconfig "Have BBC1HD as channel 101" to no and the same for ITVHD, have then run a channel scan and saved settings and restarted but no channel swaps. The settings are all correct for my region but no matter what i do i cannot get it to swap the 2 HD channels for the SD. Any ideas anybody?
 
Dazzo1971 said:
I updated to brand new woosh I have 2 cccams on.Disabled auto bouquet maker as I have custom bouquets with my iptv sub and they all work absolutely brilliant.My only problem is crossepg comes up with an error.I don't mind as I use epg importer thank you very much wooshman and all concerned.
Click to expand...

I use epg importer too so I disabled crossepg so don't have that problem
 
escortrs said:
Hi,
Im running W7.002 and all is going well except no matter what i do it wont swap BBC1HD or ITVHD for the SD options, I have set WBconfig "Have BBC1HD as channel 101" to no and the same for ITVHD, have then run a channel scan and saved settings and restarted but no channel swaps. The settings are all correct for my region but no matter what i do i cannot get it to swap the 2 HD channels for the SD. Any ideas anybody?
Click to expand...
I can't remember if you need to save settings and then scan, or scan then save settings. It does work though.
 
wooshman said:
Zgemma H2S, H2H, H52S, H52TC, Vu+ Duo2 & Vu+ Solo2 have all be re-uploaded with the updates done and resolves the issue so updates can be done again.
Other boxes are being done at the moment.

It does mean you need to re-flash though, but as always takes 10 mins max when you do it through WB Config. Backup your settings etc as usual before you start.

Classed as WB 7.001:
it brings a slightly updated Freesat skin
WB Config 2.06 also has the ability to remove the live toppicks images from the EPG Screen for those who need a full width EPG.
WB Config has also been updated so you can see the version of WB you are running.

Please DO NOT reflash you box unless it is named above.
You only need to reflash your box if you are bothered that you can't run software updates. Personally I like to be able to run them and WB takes advantage of the updates with it's skins and plugins.
Click to expand...
Not been on here for about two weeks so glad I decided to go through all posts and see this just reflashed and all good Thank you for all your and the teams work [emoji16][emoji16][emoji3]

Sent from my SM-G950F using Tapatalk
 
wooshman said:
Yes, the WooshBuild plugins section looking at that.

I have just uploaded version 1.02 for the Easy VPN Adder. DO NOT DO software updates if you have not reflashed to WB7.001 - instead uninstall the original VPN adder and then re-install it from the wooshbuild plugin feeds (same process as before)

EasyVPN adder has changed slightly.
Digibit and PIA (Private internet access) are both available. And more to come.
It now detects a successful connection to the VPN server by showing the green logo, if it stays red then you are not connected to the VPN server.

IPv6 still shows the horrible IP address - This is purely cosmetic though. The VPN will still work though as long as the green logo is showing.

Massive thanks to @xero50 for his time in trying to resolve the above issue.
Many thanks to @cmerriman for testing possible fixes for the above issue.
Huge thanks to @makido for sorting the bits and pieces in the first place making my job easy.
Click to expand...
Brilliant to see Digibit vpn incorporated into wooshbuild excellent news for us that are Digibit subscribers happy dayz

Sent from my SM-G950F using Tapatalk
 
You must log in or register to reply here.
Back
Top