Thanks .. any Idea on the USB flash issue?
I Can 99% guarantee this will work for the usb flash problem.
1. plug in your usb
2. go to run or click start and type cmd (get a commend prompt)
3. type: disk part (it will open a new cmd window)
4. Type: list disk
5. it will show your disk and a number type: select disk 2 (if 2 is your disk look at gb size)
6. type: clean
7: type: create partition primary
8. type: active
9: type: format fs=fat32 quick
10. once complete type exit and then go to your usb as usual from my computer & copy over the zgemma folder
11. turn off box with power button on back put in usb then turn on the button.
12. it will say FLASH
13. grab a beer you earned it.
Using disk part as above works for me on every box and usb I have tried. Post back once you have done this to help others too ;)
Thanks .. any Idea on the USB flash issue?
I Can 99% guarantee this will work for the usb flash problem.
1. plug in your usb
2. go to run or click start and type cmd (get a commend prompt)
3. type: disk part (it will open a new cmd window)
4. Type: list disk
5. it will show your disk and a number type: select disk 2 (if 2 is your disk look at gb size)
6. type: clean
7: type: create partition primary
8. type: active
9: type: format fs=fat32 quick
10. once complete type exit and then go to your usb as usual from my computer & copy over the zgemma folder
11. turn off box with power button on back put in usb then turn on the button.
12. it will say FLASH
13. grab a beer you earned it.
Using disk part as above works for me on every box and usb I have tried. Post back once you have done this to help others too ;)
I can't seem to get this to work with windows 7 or 8 and I've tried low level formatting followed by full windows fat32 format, using a sandisk 16gb cruzer blade. Box just seems to go straight to boot on powering up. Any ideas greatly appreciated ? :beg:
Thanks .. any Idea on the USB flash issue?
I Can 99% guarantee this will work for the usb flash problem.
1. plug in your usb
2. go to run or click start and type cmd (get a commend prompt)
3. type: disk part (it will open a new cmd window)
4. Type: list disk
5. it will show your disk and a number type: select disk 2 (if 2 is your disk look at gb size)
6. type: clean
7: type: create partition primary
8. type: active
9: type: format fs=fat32 quick
10. once complete type exit and then go to your usb as usual from my computer & copy over the zgemma folder
11. turn off box with power button on back put in usb then turn on the button.
12. it will say FLASH
13. grab a beer you earned it.
Using disk part as above works for me on every box and usb I have tried. Post back once you have done this to help others too ;)
I can't seem to get this to work with windows 7 or 8 and I've tried low level formatting followed by full windows fat32 format, using a sandisk 16gb cruzer blade. Box just seems to go straight to boot on powering up. Any ideas greatly appreciated ? :beg:
The file on your usb must say zgemma nothing else or it will just boot up ? That's wat I found when I did it ?
Sent from my iPhone using Tapatalk