Cables, Splitters are OK. How can I check power levels? SNR is around 77% but the glitching as is much with BBC then with Sly channels. Any other settings I can check?You've answered your own question in the title - signal issue.
Check cables / splitters / power levels etc.
Yes I am indeed, the levels according to VM Hub look near same to my house but his signal seems to glitch with every channel.So you're using Technetix 5-1000mhz splitter and high quality cable with compression fittings?
You can log into VM superhub to get levels.
Im sure the NET ID to be correct and provider is the same.Correct net id been set?
Using same line provider?
The router is Very close to the box. Can that really have a significant effectIts ether the server your using or the router is to close to the zgemma box [emoji106]
OK will do tomorrow morning. Appreciate itRetrace all cables from omni box where it enters the property to your equiptment etc double check your connections are tight and if possible try another splitter, these normally dont fail but worth checking process of elimination and rf adapter on end of your box line ( had a faulty one myself ) other than that pretty much covered all the usual suspects
The router is Very close to the box. Can that really have a significant effect
Sent from my A0001 using Tapatalk
OK will try and move router or box to a suitable distance away. Thanks a lotYes mate found this to give interference that affects the channels [emoji106]
My guess is the splitter. I did get it for £2 for a local hardware store. The Cables are of high quality imo and the NET ID I'm sure to be correct. Will try a different splitterIf it's pixellation / distortion on the screen, my guess is still with cables / connection / splitters or wrong net id.
It is according to the front and packaging. But will get it replaced or go to a different shopBut, you said it was a Technetix 5-1000mhz splitter?