dsayers2014
VIP Member
Please note this is only for the for the new model h.2h with both vm and sky connection and subs
new vix 4.1.00 series HERE
please note you need both a sky and vm connection and subs for this image to work
vix3.2037 for the zgemma H2.H with Chabs v1.5 VM skin with setup guide
included in this backup
mgcamd1.38 and cccam2.30
iptv player
channel numbers hack for channel numbers on epg
crossepg for sat and epg refresh for cable
catchflush plugin
Dream-Explorer
includes slyk1hd with epg tabs
see bottom of the guide on how to install
this backup has been set to generate one set of bouquets by replacing the non available
sky hd channels with vm hd channels so the channel numbers will be the same as sky 106 sky 1hd and 107 is sky living hd
please note you need both a sky and vm connection and subs for this image to work
new way to download it
ftp this imagebackups file to media/hdd/
menu
setup
vix
image manager
blue to restore
or if using the usual usb flash with the zgemma on a formatted usb stick turn of box using back power button insert usb in back and switch on using back button then box should change from usb to flash
download here:
:download:
Set with mgcamd1.38. & cccam2.3 and with all mg_cfg and newcamd.list and CCcam.cfg files needed in place! Just edit your details in and reboot! DO NOT SEND YOUR FILES IN. EDIT WHATS ALREADY THERE
Do not online update Vix on any box from Airsat (ibox/zgemma). I have updates turned off anyway.
OK. Basically u need a usb or hard drive that can be wiped and devoted to the box.
That will store program guide and recordings and timeshift to rewind TV etc.
4gb is minimum I'd recommend. But more is better.
Once image is flashed and u edit ur newcamd.list file in usr/keys or CCcam.cfg in /etc with filezilla.
Get the permanent USB/hdd onto a PC and quick format it.
ZGEMMA DISHCABLE'S SETTUP
plug one dish cable into tuner A(sat). and the second cable into B(vm).
You will need to blug kenable F Type Screw Connector Socket to RF Coax Aerial Male Adapter to plug into tuner b
then
menu, setup, service searching,Tuner configuration,
select Tuner B: and input your network id
check here for a list of network ids http://www.techkings.org/general-cable-tv/65862-cable-netids.html
you will need both sat and cable leads connected aswell as a sub for both
USB/ HARD DRIVE SETUP
Box off.
Usb in rear.
Box on.
Menu
Setup
System
Storage devices
Initialisation
Select ur drive
Red to initialise
Then convert ext3 to 4
Exit all
I don’t think the newer models need swapfile but if you want to enable it
Menu
Setup
Vix
Swapfile manager
Blue to create 256mb. Wait
Yellow to autostart
Green to start
Red to close.
Hold power button on remote for 3 secs and select Restart (not GUI)
(If u are using a large enough usb/HDD u may want to go to
Menu
Setup
System
Timeshift settings
Autostart ts after 30secs or whatever.
As it is u must press pause to start timeshift)
If you find that the screen is to large/small/off to side:
Menu
Setup
System
User interface
Position setup
U can change about here. Including transparency of windows.
TO SETUP ABM
Menu
Setup
Service searching
Autobouquets maker
Providers. Wait
Sky UK :area. Change from north west yorkshire hd to your area hd not sd or custom by pressing right or left.
You may want to go down and change sky uk channel swap to no if you don’t have bbc and itv hd versions in your area
change sky roi to yes roi hd and change all the generate bouquets to no
Then virgin(uk): area change 41064 York(ff Leeds) to your net id you do not need to generate any bouquets apart from
generate main bouquet thats for epg
Green to save.
Start scan. Wait.
Exit all
Hold power Restart
TO SETUP EPG
I have set-up crossepg for sat and epgrefresh for cable
For crossepg (sat)
Menu
setup
System
Epg
Cross EPG
Download now. Takes 5-10 mins. Will seem like its stuck on Loading Data. Wait.
Happens automatically at 6.30 am anyway.
Exit all
Hold power again and restart.
For epgrefresh (cable)
go to all channels bouquet on virgin it will be at the bottom of the list select any channel and press blue button then epg refresh now this is setup to automatically run at 5.30 am.
This is also set to shut down the box after automatic scan at 5.30am to change this portal, epgrefresh show advance options yes
Change shutdown after EPG refresh to no.
Chabs vm skin
auto bouqets setup
auto epg update set
cross epg setup to hdd for sat
epg refresh for cable
Includes mgcamd, cccam, openwebif, picture player, Media scanner, Dream-Explorer, iptv Player, epg refresh and cachflush
set to swap sky hd channels with virgin
To change the resolution
this image is set to 720p for people with lower resolution tvs if you want to change it menu, setup, system, A/V settings highlight mode and
press right to change to 1080p then green ok
To install picons if you want
google and find a picon folder.
ftp the picon folder to /usr/share/enigma2
graphical infobar epg settings.
change service title mode to picon and service name.
then graphical epg settings.
change service title mode to picon and service name.
Then channel selection settings.
show picons In service list. Change to yes.
Now press blue button then softcam Manager and start ccam.2.3.0 and blue to enable startup
Idiots Guide for adding your line with Filezilla
On your Box Menu > Info> Network > Get your box IP address
Open up Filezilla Host (top left ) Type in IP address Username root Leave others blank Press Quickconnect
Box should then connect to computer Left side computer, Right hand box
For N lines
On right hand side locate usr Double click it Then Keys Double click It You should now see 2 files Mg and Newcamd list On Newcamd list Left click/right click Then click View/Edit ( It may ask you what program you wish to view the file choose Notepad) You will see 2 samples of what your line should look like either edit your line details or Delete up to CWS = (space either side of = )
Copy and past your line Less the N: in its place
Disconnect from Filezilla By Clicking the X just under bookmarks top of page
Press blue button on remote control >.Softcam Manager Select Mg 1.38 and start cam Restart box (not with GUI)
For C lines
Instead of usr/keys on box Your line goes Complete with the C in the Ect folder on box and select CCcam and start in Softcam manager and restart box
Hope it helps
If you want to use slyk1 hd skin menu, setup, system, user interface, skin setup and select slyk1hd
check here for updates and instrucions for slyk1hd
http://www.techkings.org/zgemma-star-2s/84606-slyk-1-hd-sly-skin-version-3-now-available.html
pics below
new vix 4.1.00 series HERE
please note you need both a sky and vm connection and subs for this image to work
vix3.2037 for the zgemma H2.H with Chabs v1.5 VM skin with setup guide
included in this backup
mgcamd1.38 and cccam2.30
iptv player
channel numbers hack for channel numbers on epg
crossepg for sat and epg refresh for cable
catchflush plugin
Dream-Explorer
includes slyk1hd with epg tabs
see bottom of the guide on how to install
this backup has been set to generate one set of bouquets by replacing the non available
sky hd channels with vm hd channels so the channel numbers will be the same as sky 106 sky 1hd and 107 is sky living hd
please note you need both a sky and vm connection and subs for this image to work
new way to download it
ftp this imagebackups file to media/hdd/
menu
setup
vix
image manager
blue to restore
or if using the usual usb flash with the zgemma on a formatted usb stick turn of box using back power button insert usb in back and switch on using back button then box should change from usb to flash
download here:
:download:
Set with mgcamd1.38. & cccam2.3 and with all mg_cfg and newcamd.list and CCcam.cfg files needed in place! Just edit your details in and reboot! DO NOT SEND YOUR FILES IN. EDIT WHATS ALREADY THERE
Do not online update Vix on any box from Airsat (ibox/zgemma). I have updates turned off anyway.
OK. Basically u need a usb or hard drive that can be wiped and devoted to the box.
That will store program guide and recordings and timeshift to rewind TV etc.
4gb is minimum I'd recommend. But more is better.
Once image is flashed and u edit ur newcamd.list file in usr/keys or CCcam.cfg in /etc with filezilla.
Get the permanent USB/hdd onto a PC and quick format it.
ZGEMMA DISHCABLE'S SETTUP
plug one dish cable into tuner A(sat). and the second cable into B(vm).
You will need to blug kenable F Type Screw Connector Socket to RF Coax Aerial Male Adapter to plug into tuner b
then
menu, setup, service searching,Tuner configuration,
select Tuner B: and input your network id
check here for a list of network ids http://www.techkings.org/general-cable-tv/65862-cable-netids.html
you will need both sat and cable leads connected aswell as a sub for both
USB/ HARD DRIVE SETUP
Box off.
Usb in rear.
Box on.
Menu
Setup
System
Storage devices
Initialisation
Select ur drive
Red to initialise
Then convert ext3 to 4
Exit all
I don’t think the newer models need swapfile but if you want to enable it
Menu
Setup
Vix
Swapfile manager
Blue to create 256mb. Wait
Yellow to autostart
Green to start
Red to close.
Hold power button on remote for 3 secs and select Restart (not GUI)
(If u are using a large enough usb/HDD u may want to go to
Menu
Setup
System
Timeshift settings
Autostart ts after 30secs or whatever.
As it is u must press pause to start timeshift)
If you find that the screen is to large/small/off to side:
Menu
Setup
System
User interface
Position setup
U can change about here. Including transparency of windows.
TO SETUP ABM
Menu
Setup
Service searching
Autobouquets maker
Providers. Wait
Sky UK :area. Change from north west yorkshire hd to your area hd not sd or custom by pressing right or left.
You may want to go down and change sky uk channel swap to no if you don’t have bbc and itv hd versions in your area
change sky roi to yes roi hd and change all the generate bouquets to no
Then virgin(uk): area change 41064 York(ff Leeds) to your net id you do not need to generate any bouquets apart from
generate main bouquet thats for epg
Green to save.
Start scan. Wait.
Exit all
Hold power Restart
TO SETUP EPG
I have set-up crossepg for sat and epgrefresh for cable
For crossepg (sat)
Menu
setup
System
Epg
Cross EPG
Download now. Takes 5-10 mins. Will seem like its stuck on Loading Data. Wait.
Happens automatically at 6.30 am anyway.
Exit all
Hold power again and restart.
For epgrefresh (cable)
go to all channels bouquet on virgin it will be at the bottom of the list select any channel and press blue button then epg refresh now this is setup to automatically run at 5.30 am.
This is also set to shut down the box after automatic scan at 5.30am to change this portal, epgrefresh show advance options yes
Change shutdown after EPG refresh to no.
Chabs vm skin
auto bouqets setup
auto epg update set
cross epg setup to hdd for sat
epg refresh for cable
Includes mgcamd, cccam, openwebif, picture player, Media scanner, Dream-Explorer, iptv Player, epg refresh and cachflush
set to swap sky hd channels with virgin
To change the resolution
this image is set to 720p for people with lower resolution tvs if you want to change it menu, setup, system, A/V settings highlight mode and
press right to change to 1080p then green ok
To install picons if you want
google and find a picon folder.
ftp the picon folder to /usr/share/enigma2
graphical infobar epg settings.
change service title mode to picon and service name.
then graphical epg settings.
change service title mode to picon and service name.
Then channel selection settings.
show picons In service list. Change to yes.
Now press blue button then softcam Manager and start ccam.2.3.0 and blue to enable startup
Idiots Guide for adding your line with Filezilla
On your Box Menu > Info> Network > Get your box IP address
Open up Filezilla Host (top left ) Type in IP address Username root Leave others blank Press Quickconnect
Box should then connect to computer Left side computer, Right hand box
For N lines
On right hand side locate usr Double click it Then Keys Double click It You should now see 2 files Mg and Newcamd list On Newcamd list Left click/right click Then click View/Edit ( It may ask you what program you wish to view the file choose Notepad) You will see 2 samples of what your line should look like either edit your line details or Delete up to CWS = (space either side of = )
Copy and past your line Less the N: in its place
Disconnect from Filezilla By Clicking the X just under bookmarks top of page
Press blue button on remote control >.Softcam Manager Select Mg 1.38 and start cam Restart box (not with GUI)
For C lines
Instead of usr/keys on box Your line goes Complete with the C in the Ect folder on box and select CCcam and start in Softcam manager and restart box
Hope it helps
If you want to use slyk1 hd skin menu, setup, system, user interface, skin setup and select slyk1hd
check here for updates and instrucions for slyk1hd
http://www.techkings.org/zgemma-star-2s/84606-slyk-1-hd-sly-skin-version-3-now-available.html
pics below
Last edited: