Sorry im confused with that message?the two brass coloured threads go on the 'out' and the one with black plastic goes on the 'in'
What else can it be you think5-2400mhz splitter works prefectly fine.
if you are getting juddering on bbc 1 SD then that counts the line out as a line is not needed for 1-5 sd.
Cool yeh i understand..thanks il try lateron the splitter, you have three cables attached.
The one with black on it looks like the feed coming into the house
the two with brass fittings look like they should go to box and router
I dont think i can mpve one of the brass cable because its only 60cm in length and goes from the white to the splitter inon the splitter, you have three cables attached.
The one with black on it looks like the feed coming into the house
the two with brass fittings look like they should go to box and router
I dont think i can mpve one of the brass cable because its only 60cm in length and goes from the white to the splitter in
Sent from my HTC 10 using Tapatalk
Cool..it worked for more than yr.just last month its starting to mess up..but yeh il give it a go.thanksIt doesn't matter if it's not long enough, you can't have the incoming feed going into the 'out' socket, you may have to buy a longer cable or move the box or router, it has to be configured like this
View attachment 31502
You getting me worried..you mean they will randomely come to my house..do i disconnect the box thensplitter may work but can let in interference as outside the range vm use,i wonder if a knock on the door visit could happen?
have you tried box in another house?
I've not heard of anyone getting a knock on the door.You getting me worried..you mean they will randomely come to my house..do i disconnect the box then
Sent from my HTC 10 using Tapatalk
All done the same im going to throw it out loltry rebooting the router and box, restart softcam and see if it's any better, if not you may have a duff tuner in the box
I agree with dodgy tuner, have you swapped cables with router and box, even without line or softcam your basic 1-5 sd channels should work fine I think.try rebooting the router and box, restart softcam and see if it's any better, if not you may have a duff tuner in the box
Yeh i done it from scratch and followed the e2 openvix guide on techkings..i think msybe its a tuner fault..as even my sd chaneels without a softcam still have judder..when you reflashed box did you setup from start and not use settings restore?