.....and neither am I
Still trying to get the cccam/cline working.
still cant get N line to work. im using CWS = but at the very end the blank newcand.list has 12 13 14 lan. should I be deleting this lan ??????
I have changed my supplier of my sat line,because the software conflicts with my pc. I have 2 boxes zgemma vu. Solo, please can you tell me will filezilla programme both my boxes. What is the best way doing this. Thanks roddsYes it can be done on the box with the remote, but that is a long way to do it.
First you need to determine whether your line is a c line or a n line.
So when you get your line or file (right click open with notepad)
If the line inside starts with "n:" or "CWS = " it's a n line if it starts with "C:" it's a c line.
I like to add lines through FTP. so download a client, Filezila is the most popular.
Go to Menu > Information > Network on your zgemma. *MAKE NOTE OF YOUR ZGEMMA IP*
Go to filezila,
Host: *ZGEMMA IP*
Username: root
Password: root
Port: 21
N Line
Navigate to usr/keys/ on Filezilla
right click newcamd.list View/Edit
Simply replace the "N:" in your line with "CWS = " like this:
CWS = vm.server.com 12000 user-10980 168248 01 02 03 04 05 06 07 08 09 10 11 12 13 14
for a cable line, paste your line in the top line of the newcamd.list document
for a sat line paste your line in the bottom line of the newcamd.list document
save the file.
On your Zgemma, menu> setup > Softcam/CI > Softcam Manager > Select MGcamd then restart box.
C Line
Navigate to etc/ on Filezila
right click CCcam.cfg View/Edit
simply paste your c line in there in the same format, "C: ********************************* 01 02 03 04 05 06 07 08 09 10 11 12 13 14"
On your Zgemma, menu> setup > Softcam/CI > Softcam Manager > Select CCcam then restart box.
Filezilla will allow you to edit/transfer your line details on any receiver.I have changed my supplier of my sat line,because the software conflicts with my pc. I have 2 boxes zgemma vu. Solo, please can you tell me will filezilla programme both my boxes. What is the best way doing this. Thanks rodds
Yes it can be done on the box with the remote, but that is a long way to do it.
First you need to determine whether your line is a c line or a n line.
So when you get your line or file (right click open with notepad)
If the line inside starts with "n:" or "CWS = " it's a n line if it starts with "C:" it's a c line.
I like to add lines through FTP. so download a client, Filezila is the most popular.
Go to Menu > Information > Network on your zgemma. *MAKE NOTE OF YOUR ZGEMMA IP*
Go to filezila,
Host: *ZGEMMA IP*
Username: root
Password: root
Port: 21
N Line
Navigate to usr/keys/ on Filezilla
right click newcamd.list View/Edit
Simply replace the "N:" in your line with "CWS = " like this:
CWS = vm.server.com 12000 user-10980 168248 01 02 03 04 05 06 07 08 09 10 11 12 13 14
for a cable line, paste your line in the top line of the newcamd.list document
for a sat line paste your line in the bottom line of the newcamd.list document
save the file.
On your Zgemma, menu> setup > Softcam/CI > Softcam Manager > Select MGcamd then restart box.
C Line
Navigate to etc/ on Filezila
right click CCcam.cfg View/Edit
simply paste your c line in there in the same format, "C: ********************************* 01 02 03 04 05 06 07 08 09 10 11 12 13 14"
On your Zgemma, menu> setup > Softcam/CI > Softcam Manager > Select CCcam then restart box.
might I ask how you did manually cos I am new to all this really (first post)I tried it this way , but no luck with the line going in, wooshbuild v5 all working 100% though.
Ill try figure out how to enter it manually.
Hi Blakey hope this helps
C Line Setup CCcam.cfg should be supplied by your provider
1. On your PC, Install filezilla you downloaded earlier and run the program
2. Host box type in Sat box IP address, Username box type in’ root’ then press quick connect
3. Left box (local site) go to location on your PC where CCcam.cfg is
4. Right box(remote site) go to /usr/keys
6. Drag your CCcam.cfg over to the Left box
On your Zgemma, Press Blue Button-System-Softcam Panel
1. Select Cam 1 scroll to ‘CCcam 2.3.0’
2. Green button to start
3. Exit
N Line Setup Newcamd.list should be supplied by your provider
1. On your PC, Install filezilla you downloaded earlier and run the program
2. Host box type in Sat box IP address, Username box type in’ root’ then press quick connect
3. Left box (local site) go to location on your PC where newcamd.list is
4. Right box(remote site) go to /usr/keys
6. Drag your newcamd.list over to the Left box
On your Zgemma, Press Blue Button-System-Softcam Panel
1. Select Cam 1 scroll to ‘MGcam1.38’
2. Green button to start
3. Exit
Reboot Box
Hi tried this as im having the same problem, in filezilla usr/keys not showing the newcamd.list file, tried the sequence above but no joy do u have to name file newcamd.list??and change N: to CWS = ?? Ta in advance
Yeah i done all of that but not getting anything in usr/ keys on filezilla where do u save file desktop?? I must be doing somethimg wrong i got mgcamd 1.38 on softcam manger?? Baffled!!!Yes you do - and when you create the file in notepad, call it newcamd.list but before hitting save, change file type to all.
Using openvix?? Is this reccomended????
Just emailed server awaiting answer on weather i should change N to CWS, this wouldnt solve the problem tho would it??I notice a lot people saying "just change the N: to a CWS = "
I would always ask your provider before doing this as the port can change and the line will be useless.
My provider has 3 different ports depending on your line of choice.
C line port 0001
N line port 0002
Mgcamd line port 0003
The cache only exchange servers will use just one port. That's why the marjoity say it's ok to just change the N to a CWS
If your line is not working a simple question to your supplier will clear this up.