Open Atv 5.0 New build. updated
Updated Openatv 5.0
Tested and confirmed working on
Zgemma 2S.
As with all official versions this can be
updated Ota
This build includes:
Blue-Hd Skin
CCcam.cfg & mg_cfg files installed.
Download file here:
To flash box:
When the box has restarted switch
off and insert
HDD/USB drive you are going to use
for Epg
Recording etc. and restart.
If you need to Initialise the drive
press blue button select
Harddisk, Initialisation,select drive
and press red to start.
Swapfile setup
Press red,Plugins,SwapManager.
Green/Create set Swap Size to
256MB
press Red/ActivateYellow/Autostart.
Change region in Autobouquets,
then delete bouquets and start scan.
To add a cline ftp into "etc" and
upload your .cfg file.
Check in Softcams that CCcam2.3.0
is running if not press
Start/Restart and the indicator will
turn green.
To add an nline ftp into usr/keys edit
existing newcamd.list file
using notepad,insert your line
without the N
after CWS =. ftp into usr/keys
go into Softcams and select
MGcamd 1.38
press green (start/restart).
Reboot.
That should be you good to go.:)
Updated Openatv 5.0
Tested and confirmed working on
Zgemma 2S.
As with all official versions this can be
updated Ota
This build includes:
Blue-Hd Skin
[*=center]
[*=center]
[*=center]
[*=center]
[*=center]
[*=center]
[*=center] (by rossi2000 and simonsez)
[*=center]Sky.new skin+weather plugin
[*=center](by fraggle121 & chababus).
[*=center]TSmedia 9.8
[*=center]XMLTV-Importer setup for
[*=center]
[*=center]
[*=center]
[*=center]
[*=center]
[*=center]
[*=center]
[*=center]
[*=center]daily update.
[*=center](replaces CrossEpg due to
[*=center]
[*=center]
[*=center]
[*=center]
[*=center]
[*=center]
[*=center]
[*=center]
[*=center] reliability problems)
[*=center]On Demand
[*=center]KodiDirect
[*=center]
[*=center]TSpanel 7.5 with CCcam 2.3.0 &
[*=center]MGcamd 1.38 in Softcams.
CCcam.cfg & mg_cfg files installed.
Download file here:
Code:
https://www.dropbox.com/s/nc4q3ucda1xw25a/Openatv%205.0%20Bob.%2005-06-15.rar?dl=0
To flash box:
Unrar file and copy the zgemma
folder to
a formatted usbdrive, place in
rear usb, switch
box on whilst
holding front power button, display
will change to "FLSH".
Box will flash in 3-10 minutes and
the display will change to "Boot".
folder to
a formatted usbdrive, place in
rear usb, switch
box on whilst
holding front power button, display
will change to "FLSH".
Box will flash in 3-10 minutes and
the display will change to "Boot".
When the box has restarted switch
off and insert
HDD/USB drive you are going to use
for Epg
Recording etc. and restart.
If you need to Initialise the drive
press blue button select
Harddisk, Initialisation,select drive
and press red to start.
Swapfile setup
Press red,Plugins,SwapManager.
Green/Create set Swap Size to
256MB
press Red/ActivateYellow/Autostart.
Change region in Autobouquets,
then delete bouquets and start scan.
To add a cline ftp into "etc" and
upload your .cfg file.
Check in Softcams that CCcam2.3.0
is running if not press
Start/Restart and the indicator will
turn green.
To add an nline ftp into usr/keys edit
existing newcamd.list file
using notepad,insert your line
without the N
after CWS =. ftp into usr/keys
go into Softcams and select
MGcamd 1.38
press green (start/restart).
Reboot.
That should be you good to go.:)
Last edited: