What's new
By:

VM CHANNELS FIX (23/4/2020) OSCAM ONLY!!

Kyser143 said:
Maybe someone can answer this one since your all in mood to be helpful can two oscam lines be used at same time eg cable and sat....I have cable running fine but added sat and the cable channels dont work but sat do...turn of sat then cable runs fine but both dont work at same time.
Click to expand...
Have you added both lines in readers in the oscam.server file?
Maybe get the sat line changed to C line and add it to its own c line sat reader. ..I'm not sure if they are both mgcamd that oscam would open them simultaneously
 
pabloescaban said:
Have you added both lines in readers in the oscam.server file?
Maybe get the sat line changed to C line and add it to its own c line sat reader. ..I'm not sure if they are both mgcamd that oscam would open them simultaneously
Click to expand...
Yep just added them both in readers in the oscam file and both work but not simultaneously ..both are actually N lines converted to oscam..will try c line sat reader option
 
Kyser143 said:
Yep just added them both in readers in the oscam file and both work but not simultaneously ..both are actually N lines converted to oscam..will try c line sat reader option
Click to expand...
I know two or even three cable N lines will work simultaneously but not 100% sure that sat N lines will at the same time
 
Have you tried setting sat reader to caid 0963 and cable reader to caid 1841?
So it knows which channels to send to which reader.
 
can anyone help with the cccam to oscam converter please.
I paste my n line into the convert and convert it and when I copy the output ito my Oscam.server folder it doesn’t clear anything?
 
Open the oscam.server file and paste these extra lines at the bottom and close it
emmcache = 1,3,2,0
blockemm-unknown = 1
dropbadcws = 1
disablecrccws = 1
 
pabloescaban said:
Open the oscam.server file and paste these extra lines at the bottom and close it
emmcache = 1,3,2,0
blockemm-unknown = 1
dropbadcws = 1
disablecrccws = 1
Click to expand...


Thanks mate but still nothing clearing.

Can someone confirm if im doing it right, im clicking on the n: line tab then enter my line in this format

CWS = myline port user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
 
I think your confused between oscam and mgcamd ....where exactly are you entering the info on the box

Or are you referring to the oscam converter?
 
sambhi92 said:
Thanks mate but still nothing clearing.

Can someone confirm if im doing it right, im clicking on the n: line tab then enter my line in this format

CWS = myline port user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Click to expand...
paste the contents of your oscam.server file (blanking out server details) here. we can then have a look.

Are you sure that your provider has fixed it his end?
 
Yeah using the oscam converter.
My provider told me to run my mgcamd line through the oscam converter and it should work.

So perhaps I’m doing something wrong here?
 
sambhi92 said:
Yeah using the oscam converter.
My provider told me to run my mgcamd line through the oscam converter and it should work.

So perhaps I’m doing something wrong here?
Click to expand...

Best to follow Grogs advice convert then past your oscam file ...remove or change your server info so we maybe able to identify what the problem is ..
 
grog68 said:
paste the contents of your oscam.server file (blanking out server details) here. we can then have a look.

Are you sure that your provider has fixed it his end?
Click to expand...

So the line im enetering in the ocnverter under n line tab is - CWS = servername port user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14

what im getting back is;

[reader]
label==
enable=1
protocol=newcamd
key=01020304050607080910111213
device==,servername
user=user
password=pass
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1

Happy for someone to jump on teamviewer if they can?
 
sambhi92 said:
So the line im enetering in the ocnverter under n line tab is - CWS = servername port user pass 01 02 03 04 05 06 07 08 09 10 11 12 13 14

what im getting back is;

[reader]
label==
enable=1
protocol=newcamd
key=01020304050607080910111213
device==,servername
user=user
password=pass
group=1
inactivitytimeout=1
reconnecttimeout=30
lb_weight=100
cccversion=2.1.2
cccmaxhops=10
cccwantemu=1
ccckeepalive=1

Happy for someone to jump on teamviewer if they can?
Click to expand...
Wheres port?? Are you entering that after server name? Just after comma
 
Add the following to oscam.server but changing the parts you need:


[reader]
label =
protocol = newcamd
device = HOST,PORT
key = 0102030405060708091011121314
user = USERNAME
password = PASSWORD
caid = 1841
ident = 1841:000000
group = 1
disablecrccws_only_for = 1841:000000
 
delboy1234 said:
Add the following to oscam.server but changing the parts you need:


[reader]
label =
protocol = newcamd
device = HOST,PORT
key = 0102030405060708091011121314
user = USERNAME
password = PASSWORD
caid = 1841
ident = 1841:000000
group = 1
disablecrccws_only_for = 1841:000000
Click to expand...

Thanks for the advice but still nothin sadly.

Provider says its working and to be fair it works fine via mgcamd but i need to use oscam on octagon box. But he keeps saying use converter and wont send line in oscam format.

Any other ideas
 
You must log in or register to reply here.
Back
Top