Omfg after all thatCome on then, what was it ????
Mad. Messing with coax on back and seen little black switch so fort nowt lose switched it on and missing ones come on so whether knocked it or been off all the while i woudlnt know. Prob off all whileWeird one, i've had that switch on before and hasn't prevented channels from clearing.
It's a fact all is ok lolit's the fact that your splitter's a duffer.
If you don't believe me, swap the two cables back from ZG to Hub and hub to ZG and channels will be dark again.
This is proof that the splitter/cable is duff
I also btw put cables back as were and all ok still so was switch on back zgemma ant power switch lolit's the fact that your splitter's a duffer.
If you don't believe me, swap the two cables back from ZG to Hub and hub to ZG and channels will be dark again.
This is proof that the splitter/cable is duff
getting new splitter when can off virgin, as got 2 way one off them but need 3 way, for feed to TiVo in room, I can use 2 way one tomoz see what signal like, I'm getting missing channels on now from switching ant power switch on on back off zgemma and signal 73%I've reported the post so hopefully the mods will move it rather than delete it as it should really be in the H2.H section.
If you're 100% sure you have the right net id for your area, check cables / splitters as advised above - you should be using high quality cable... if you're not using genuine VM cable, Webro or similar is a must for cable. If you're using any splitters and it's the one(s) supplied by VM, they should be fine but if not, you should really be using Technetix branded 5-1000mhz ones.
If you have VM internet, check the signal levels on it... log into the router and post downstream and upstream screenshots on here.
On hub 3.0 and can't find where do downstream and upstream. In connected devices it showing zgemma h2h and speed 1000mbpsI've reported the post so hopefully the mods will move it rather than delete it as it should really be in the H2.H section.
If you're 100% sure you have the right net id for your area, check cables / splitters as advised above - you should be using high quality cable... if you're not using genuine VM cable, Webro or similar is a must for cable. If you're using any splitters and it's the one(s) supplied by VM, they should be fine but if not, you should really be using Technetix branded 5-1000mhz ones.
If you have VM internet, check the signal levels on it... log into the router and post downstream and upstream screenshots on here.
ive ordered one off maplin, 4 way oneVirgin won't supply a 3 way splitter, they'll say, 'use the 2 way splitter to router and tivo, what do you need a 3 way splitter for?' and you're gonna say....
ive ordered one off maplin, 4 way one
its getting one tho isn't it so ill see how go with otherAnd they're rubbish too both Ste and I have told you that genuine Tratec / Technetix splitters are the correct ones for virgin cable, those sold at maplins are no better than the one you've got
the genuine ones you need are for sale here:
http://www.techkings.org/threads/technetix-tratec-2-way-and-3-way-splitters.130700/#post-788018
and cheaper:rolleyes: