What's new
By:
Filters

WooshBuild Wooshbuild Infinity Support Thread

Status
Not open for further replies.
Jon Benson said:
I have Wooshbuilf infinity on my H2s, but try as I might I cannot get series link to work. Any Ideas?
Click to expand...
I don’t believe this is a Wooshbuild issue. I’m guessing here, but are you trying to series link IPTV channels?
I used to have a line which I could series link and still can for “free to air” channels on my h2s, but since using iptv I could never get mine to series link on iptv channels
 
CPD said:
I don’t believe this is a Wooshbuild issue. I’m guessing here, but are you trying to series link IPTV channels?
I used to have a line which I could series link and still can for “free to air” channels on my h2s, but since using iptv I could never get mine to series link on iptv channels
Click to expand...


Nope. I’m just trying to series record things like MOTD, but the blue button doesn’t work, neither does the red button and trying to edit the timer. It just ignores all of that.
 
CPD said:
I don’t believe this is a Wooshbuild issue. I’m guessing here, but are you trying to series link IPTV channels?
I used to have a line which I could series link and still can for “free to air” channels on my h2s, but since using iptv I could never get mine to series link on iptv channels
Click to expand...
Why do you believe that? My misses has hundreds of series links on our box and oddly we use Infinity.
Jon Benson said:
Nope. I’m just trying to series record things like MOTD, but the blue button doesn’t work, neither does the red button and trying to edit the timer. It just ignores all of that.
Click to expand...
From the EPG you press the Record button and select series link or the red button. The blue button from the EPG screen moves you forwards 24 hours. If your buttons are different then something isn't right.

upload_2019-1-20_20-27-45.png
 
hi guys

right so been flashing whoosh for past couple months on many boxes no issues.....however today had an issue, tried flashing a H2s everything seemed to have installed smoothly however for some strange reason on the last reset no channel came on and it turned out no autobouqetsmaker installed not in the service searching or anywhere else not be found at all....reflashed back to openatv 6.2 then flashed to woosh again same thing happened.
sat lnb wire was in and was picked up and set correctly during the setup locked on 28.2e etc as normal

cant figure out what went wrong?
 
Jon Benson said:
I have a 500gb Fujitsu hard disk recorder. It records fine if you do programmes individually, but the series link on the H2s just will not work
Click to expand...

I get the same occasionally on my H2s, can't set series link either through the record button or the red button .. Usually turns out to be an old timer lurking in the list that is clashing with the new timer, I delete that and all good .. or it's a clash with the start/finish time of another recording but that usually pops up a message saying so.
Not much help but might be worth looking in your timers.
 
Hi
I have Wooshbuild Infinity set up and running perfectly on my zgemma h2h running vir*in
I’m having issues accessing my IPTV bouquets.
The supplier is showing in autobouquets but not in epg or anywhere.
Am I missing something simple?
Thanks in advance
 
Cairnsy99 said:
Hi
I have Wooshbuild Infinity set up and running perfectly on my zgemma h2h running vir*in
I’m having issues accessing my IPTV bouquets.
The supplier is showing in autobouquets but not in epg or anywhere.
Am I missing something simple?
Thanks in advance
Click to expand...
PRESS favourites on remote how did you set your iptv up was it using suls
 
bazcfc1 said:
PRESS favourites on remote how did you set your iptv up was it using suls
Click to expand...

I used putty to send it over.
I was using an old version of vix which showed my iptv bouquets on the epg which worked fine.
I’ve updated over the weekend and can see my suppliers name with a ticked box but can’t find the channels anywhere
 
Last edited:
Cairnsy99 said:
I used putty to send it over.
I was using an old version of vix which showed my iptv bouquets on the epg which worked fine.
I’ve updated over the weekend and can see my suppliers name with a ticked box but can’t find the channels anywhere
Click to expand...
Have you been pressing next on epg to change harding or try a reboot of box
 
bazcfc1 said:
Have you been pressing next on epg to change harding or try a reboot of box
Click to expand...

I will have another look when I get home in a couple of hours. I’d normally just use the right arrow key on my remote to navigate to the next page of the epg.

I have another of my boxes to update so will probably look at using suls for that box.

Thanks for the help
 
Hi All,

I've just come back to Wooshbuild and I'm already impressed with Infinity. I'm not afraid to fiddle & tweak to get things set-up, but the Wizard is very thorough; when it'd completed there was only two changes to make for my ideal setup. The first one (channel numbers in grid EPG) I found in the menus; the other I found by searching here (so I promise I'm trying that first!) - getting an 'All Channels' bouquet [into the SkyWB skin].

Unfortunately I do have one problem, and can't find any clues by search. On some channels (CNN HD, Euronews), I'm only seeing Now & Next programme data (I think this comes off the satellite stream?). CNN (SD) is fine. Is this a known thing; could anyone point me to things I might try to fiddle with?

Thanks for any suggestions,

Rob.

NB: Provider is set to Granada SD Custom [I guess by the Wizard?], FTA only. (With main bouquet added.)
 
I using wooshbuild infinity on my zgemma h2h and mutant 51 awesome work, I see you can use it on vu + duo2 will the lcd screen and menu screen work or will they stay blank? One normally says tv channel and lcd shows channel with picons and program time in bar
 
darrenw45 said:
I using wooshbuild infinity on my zgemma h2h and mutant 51 awesome work, I see you can use it on vu + duo2 will the lcd screen and menu screen work or will they stay blank? One normally says tv channel and lcd shows channel with picons and program time in bar
Click to expand...
You an set them both up to work how you want. It is possible that as standard though from an Infinity install one will stay blank. You need to mess with something. @makido is the person to answer this as she has one.
 
Status
Not open for further replies.
Back
Top