What's new
By:
Filters

Disabling MG_CFG logging on Miraclebox.

D

dhpoolie

Newbie
Is there a guide anywhere for this running Openvix? Having some issues and apparently this is the soultion. I've googled and such and can't find any guide of sorts. Any help is much appreciated.
 
Not sure if I'm reading this right but generally you will only have so much bandwidth,

so if the kids are hammering the Xbox online or streaming Youtube vids on tables or phones
or you are downloading stacks of porn off Pirate Bay all at the same time,

it can cause your TV to glitch lol

If the problem is the other way around just stick your box on standby and it won't connect to the internet.
 
Last edited:
I see where you're coming from :). But, I have no kids the footy is on I'm browsing the web on my PC on the missus is on FB on her phone and it's glitching. This doesn't always happen and World of Sat reckon disabling logging is the solution.

---------- Post Merged at 08:44 PM ----------

Ethernet.
 
If you disable the cam your box won't clear the channels, have you tried another line from elsewhere ?
doesn't sound like your overloading your internet package, so could be down to your server.

Try another line and compare the results.
 
I'll expand a little. Box is a Miraclebox Mini+ Hybrid 1x DVB-C/T/T2 Cable/Terrestrial HD 1080p PVR Digital Receiver.
Ethernet cable connection(tried several).
Doesn't happen if no other devices in the house are using the internet.
Doesn't happen all the time, can go weeks without issue then starts up again.
Rebooting everything has no effect. Same issue with Virgin Superhub and a Netgear rooter.
Have a couple of friends using the same line provider and pretty much the same set up and they have no issue.
I emailed World of Sat (where I got the box) and they suggested disabling logging, hence the thread :).

---------- Post Merged at 08:57 PM ----------

bees said:
If you disable the cam your box won't clear the channels, have you tried another line from elsewhere ?
doesn't sound like your overloading your internet package, so could be down to your server.

Try another line and compare the results.
Click to expand...

I'll drop my provider a mail in the morning see if he can swap my line.
 
Yeah, I got the impression of your set up earlier, so say you have a big match on, try tomorrow or Sunday afternoon, when servers are busy.

Lots of people will be watching, so do you get glitching without using the PC and Phone ?

It's most likely to be your server or your internet package that is causing the problem.

If you suspect a fault on the box, swap yours with one of your mates for a few days and monitor it,

Another possibility is the image on your box is old and needs updating, but the last two options are less likely to be the cause.

My guess is it's probably your server.
 
dhpoolie said:
Is there a guide anywhere for this running Openvix? Having some issues and apparently this is the soultion. I've googled and such and can't find any guide of sorts. Any help is much appreciated.
Click to expand...

In your mg_cfg file look for this line # Log option, summ of: the next few lines are the options the last will look something like L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log the 00 in the brackets means logging is off.
 
Theres a mg-cfg file in downloads from sucmnsee that has been altered to stop it hogging the Internet.
Worth a try because as bees said disabling it will make channels stop working.
 
No glitching at all when all other devices are off in the house ever.
It can happen at any time. Even 0300 on a Tuesday morning for example, I can be browsing the web and if I refresh a page it wil Matrix for a split second.
I have the top VM internet package and get the advertised speeds. Have no torrents running etc.
The image is the one that World of Sat put on it when I got the box in the middle of February which they claim was the latest.
Had issues from day one.
 
The one at the bottom of the guide here

Works on a load of boxes I have set up, never had any issues with it, is this the one you are using ?

Do you have the space station logo or the country lane logo when you boot the box from scratch ?
 
Last edited:
I'll give that a bash in the morning.

---------- Post Merged at 09:22 PM ----------

bees said:
The one at the bottom of the guide here

Works on a load of boxes I have set up, never had any issues with it, is this the one you are using ?
Click to expand...

I used that eaxct guide to set it up :)

---------- Post Merged at 09:26 PM ----------

bees said:
Do you have the space station logo or the country lane logo when you boot the box from scratch ?
Click to expand...

It's a satelite orbiting the Earth.
 
Think your image may be old, you may need to flash a later image by USB.

You want the country lane one.
 
Code: 
# EMM messages#    00 don't show any EMMs (default)
#    01 show only valid EMMs
#    02 show valid and bad EMMs with complete data display
M: { 01 }


# ECM messages
#    00 don't show anything about ecm
#    01 normal mode, show pids processed, decoded ecm and cw
#    02 verbose mode, show valid and bad ECMs with data
C: { 01 }


# AU
#    00 disable, no emm pids processed
#    01 enable, emm pids always processed for soft-au and shared cards
#    02 auto, emm started only if channel cant be decoded
#    03 process emm pids for network cards update only
A: { 02 }


# key update (sum 01 or 02 with 04)
#    01 update only new keys, default setting
#    02 update all keys (used for valid PMK checking)
#    04 enable TPS au
#    + tps SID, which pmt pid contains au pid
U: { 01 } 0x12c0


# config files folder (softcam, autoroll, ignore/priority)
#    00 files in /var/keys
#    01 files in /tmp
T: { 00 }


# network mode, use summ for several clients
#    00 no network (default)
#    01 newcamd netclient
#    02 radegast netclient
#    04 camd3 netclient
#    08 gbox netclient
#    32	cccamd netclient, card list saved as /tmp/cccamd.info 
#    	(ECM only, supported server version up to 2.1.1, later not work)
G: { 01 }


# network retry, use summ for several options
#    00 disable
#    01 retry every new ecm
#    02 try to connect to offline shares every Q: seconds
#    04 try to detect and fast reconnect to lost (and not used atm) server
#    + XX messages number and YY seconds to reconnect
#    mg will reconnect to server, if no answer to last XX ecm/keepalive or
#    if no answer for last ecm or keepalive sent for YY seconds
#    set to 0 to disable
N: { 07 } 5 30


# network ecm timeout in seconds
K: { 10 }


# newcamd dead routes connect retry, sec
Q: { 600 }


# network shares priority
# 00 gbox, newcamd, cccamd, radegast, camd3 (default)
# 01 camd3, radegast, cccamd, gbox, newcamd
# 02 cccamd, newcamd, camd3, gbox, radegast
P: { 00 }


# on screen display type
#    00 No OSD (default)
#    01 neutrino
#    02 enigma
#    03 relook
#    + user password for http auth
O: { 00 } username password


# on screen display Options, summ of:
#    01 show emu ecm 
#    02 show network shares messages
#    04 show decoding failed / fta
#    08 show emm keys update
#    + web port to use for osd
S: { 03 } 80


# Log option, summ of:
#    00 off
#    01 network udp log
#    02 log to console
#    04 file, appended ! delete it by yourself, before it eat all your hdd
#    + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log


# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value, 
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }


# cache option, summ of:
#    00 Off (default)
#    01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
#    02 Ecm data cache, remember CW for (E:) time 
#    04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }


# reread files, summ of: 
#    00 No (default)
#    01 reread config file on channel change (including priority and ignore, but not replace/cache)
#    02 reread SoftCam.Key on channel change
#    04 reread SoftCam.Key if file changed
R: { 00 }


# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }


# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }


# map all 180x nagra caids to 1801
# default is 01
F: { 00 }

try that, L: 00 log is turned off + K: 10 ecm tiimeout set correctly for cable.
 
The flash did not work, grr.

@442 appreciate the help but I have no idea what that means. Any guide I could read up on so I could give it a bash?
 
You must log in or register to reply here.

Similar threads

D
Bufferbloat and OPNSense
Replies
0
Views
248
Deedoidwan
D
B
downloader app on nvidia shield pro.
Replies
4
Views
952
bondy lad
B
M
Cannot flash Miraclebox Premium Micro
Replies
6
Views
1K
Abu Baniaz
A
B
sky glass
2
Replies
31
Views
1K
bobsta2405
B
grog68
Someone attempts to send me file via bluetooth
Replies
13
Views
883
grog68
grog68
Back
Top