voyager1972
Newbie
can someone point me in the direction of a motorised setup on the zgemma ,,,,,the dish is detup from my last box dm800 and was 100%,,,,,,i cannot get it moving with the zgemma s2,,,,any step by step guides on the forum.
I'll have a look at my motorized system using a zgemma setup later on today and get back to you bud.can someone point me in the direction of a motorised setup on the zgemma ,,,,,the dish is detup from my last box dm800 and was 100%,,,,,,i cannot get it moving with the zgemma s2,,,,any step by step guides on the forum.
Zgemma H1 + Alsat Dark Motor with no LNB connected.
Tuner configuration Menu.
Configuration Mode = Simple
Mode = Position
Longitude = 001.362 West (yours will be different)
Latitude = 052.710 North (yours will be different)
Extra Motor Options = NO
(Green to Save and Exit – Should now show as Positioner : USALS
Manual Scan Menu.
Tuner = Tuner A : BCM7346 (internal) (DVB-S2)
Type of scan = User defined transponder
System = DVB-S
Satellite = 19.2E Astra
Frequency = 11836
Inversion = Auto
Symbol rate = 27500
Polaration = Horizatal
( Press Scan and hopefully the Motor will kick in and move to 19.2E – even not having a LNB connected this works for me).
I think the problem lies with the Zgemma internal memory settings matching up with whats programmed into the Motor settings !!
I use the horizon hdms usb powered by itsI think most meters are powered from the receiver. That one @steptoe uses is basically a stripped down STB and has a built in battery.
Glad you got it working M8 , Has said before i think thing the zgemma needs just one correct setting to sync. with the Motor then it will fully scan all Sats.