kiddac
Newbie
mgcamds you need 2 files.
mg_cfg
newcamd.list
mg_cfg is a standard configuration file. (there is one in the downloads at the top of this page if you haven't got one)
newcamd.list is your line file and should look something like this.
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = server.com 12345 username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 # 0000
or just
CWS = server.com 12345 username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 # 0000
you need to copy these 2 files over to usr/keys on your box. I use filezilla.
Once you have transferred them over go into your softcam panel. make sure cam1 is set to mgcamd. cam 2 set to no cam. And restart cam (green button)
Make sure you are in an active bouquet by pressing the tv button, clicking all channels and then select a channel from there.
mg_cfg
newcamd.list
mg_cfg is a standard configuration file. (there is one in the downloads at the top of this page if you haven't got one)
newcamd.list is your line file and should look something like this.
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = server.com 12345 username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 # 0000
or just
CWS = server.com 12345 username password 01 02 03 04 05 06 07 08 09 10 11 12 13 14 # 0000
you need to copy these 2 files over to usr/keys on your box. I use filezilla.
Once you have transferred them over go into your softcam panel. make sure cam1 is set to mgcamd. cam 2 set to no cam. And restart cam (green button)
Make sure you are in an active bouquet by pressing the tv button, clicking all channels and then select a channel from there.
Last edited: